[Wed Mar  7 15:38:45 2012] Detection parameters:
  Position = (286.7, 367.7) = 11 50 35.25 -62 34 32.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.9 +/- 14.0
  Background counts = 59.6
  Rate = 0.005 +/- 0.001

[Wed Mar  7 15:38:47 2012] Off-axis axis estimate = 5.09'
[Thu Mar  8 00:46:58 2012] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:46:58 2012] Initial guess for spatial extent in simple fitting = 8.97"
[Thu Mar  8 00:46:58 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.952
[Thu Mar  8 00:46:58 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 8.97"
[Thu Mar  8 05:49:56 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src73.ximg exists
[Thu Mar  8 05:49:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src73.csv
[Thu Mar  8 05:49:56 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src73_1.ximg exists
[Thu Mar  8 05:49:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src73.csv
[Thu Mar  8 05:49:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 05:49:57 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Thu Mar  8 05:49:57 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Thu Mar  8 05:49:57 2012] Fit fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Thu Mar  8 05:50:41 2012] Spatial fit model total counts = 692.128000, observed total counts = 630.000000
[Thu Mar  8 05:50:41 2012] Offset between fit and detection position for source 40 = 3.424742 pixels
[Thu Mar  8 05:50:41 2012] 633.741000 total counts/ 450.336000 bgd. counts: snr = 8.642569
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 3.424742 pixels
  Position = (286.0, 364.3) = 11 50 35.73 -62 34 49.7
  Extent = 17.9 (17.3-35.9)", rotation angle = 0
  Source counts = 183.4 +/- 25.2
  Background counts = 450.3
  Rate = 0.02 +/- 0.002
[Thu Mar  8 05:50:41 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 05:50:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 05:50:41 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 05:50:41 2012] Source does appear to be extended
[Thu Mar  8 05:50:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 05:50:41 2012] Source is confused with source 42
[Thu Mar  8 15:01:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 15:01:08 2012] Initial guess for spatial extent in simple fitting = 17.95"
[Thu Mar  8 15:01:08 2012] source mask rpix=4.1, npix_max = 85, mask sum = 70, frac = 0.818
[Thu Mar  8 15:01:08 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 17.95"
[Thu Mar  8 21:48:15 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src65.ximg exists
[Thu Mar  8 21:48:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src65.csv
[Thu Mar  8 21:48:15 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src65_1.ximg exists
[Thu Mar  8 21:48:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src65.csv
[Thu Mar  8 21:48:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 21:48:17 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Thu Mar  8 21:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src65.csv
[Thu Mar  8 21:48:17 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Thu Mar  8 21:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src65.csv
[Thu Mar  8 21:48:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 21:49:02 2012] Source 40 is offset by -0.086534 and 3.400437 pixels which is larger than
2 X fitted extent = 2.134805 x 2.134805, not incorporating fit results
[Thu Mar  8 21:49:02 2012] Spatial fit model total counts = 675.911000, observed total counts = 594.000000
[Thu Mar  8 21:49:02 2012] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar  8 21:49:02 2012] Warning, spatial fit 65 centroid is now closest to src. 42
[Thu Mar  8 21:49:02 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 21:49:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 21:49:02 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 21:49:02 2012] Source does appear to be extended
[Thu Mar  8 21:49:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 01:23:07 2012] XMMSAS src. selection expression = ellipse(24832.795534, 31647.514000, 1076.838031, 1076.838031, 0.000000, X, Y)
[Fri Mar  9 01:23:07 2012] Writing source region out to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src40_src.reg
[Fri Mar  9 01:23:07 2012] Extracting stamp from image fullrun_mos2_xmm0503220201_pi300-10000_cl_sm2.00.img.gz, (224, 302) - (348, 426)
[Fri Mar  9 01:23:07 2012] XMMSAS bgd. selection expression = annulus(24832.795534, 31647.514000, 1794.730052, 3589.460103, X, Y) && !ellipse(21866.559440, 26928.682800, 1307.312038, 1307.312038, 0.000000, X, Y) && !ellipse(22269.008000, 30804.674000, 2926.816084, 1809.968052, 125.529000, X, Y) && !ellipse(21989.574000, 29123.821000, 803.560023, 803.560023, 0.000000, X, Y) && !ellipse(22053.434200, 29987.060000, 1607.120046, 1607.120046, 0.000000, X, Y) && !ellipse(22062.588600, 29145.896000, 1343.792039, 1343.792039, 0.000000, X, Y) && !ellipse(21195.414246, 30050.802490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21768.169600, 25666.410000, 2668.848077, 2668.848077, 0.000000, X, Y) && !ellipse(21426.915543, 29357.120331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21441.960266, 28058.813660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23023.492000, 32059.566000, 2919.664084, 2919.664084, 0.000000, X, Y) && !ellipse(21685.851400, 28772.744000, 2794.512080, 2794.512080, 0.000000, X, Y) && !ellipse(22553.154000, 31332.352000, 1463.408042, 1463.408042, 0.000000, X, Y) && !ellipse(20604.068863, 29523.341095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24529.002655, 31580.277252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20569.498000, 31882.952000, 1517.536044, 1517.536044, 0.000000, X, Y) && !ellipse(21366.680000, 32835.976000, 1531.584044, 1531.584044, 0.000000, X, Y) && !ellipse(23278.082000, 32747.458000, 1485.824043, 1485.824043, 0.000000, X, Y) && !ellipse(24344.430328, 32516.822906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24085.936676, 31271.749573, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 01:23:07 2012] Writing fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src40.gif
[Fri Mar  9 02:43:09 2012] Mean detx,y = (-971.23, 3846.80) 
[Fri Mar  9 02:43:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 02:43:28 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 02:43:28 2012] Setting source spectrum file to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Fri Mar  9 02:43:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Fri Mar  9 05:25:52 2012] Updating aperture counts using extracted products
[Fri Mar  9 05:25:52 2012] Error reading totcts from fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Fri Mar  9 05:25:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar  9 05:25:55 2012] Using photon index=1.80, rate=0.0169, arf fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src40.arf
[Fri Mar  9 05:25:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar  9 05:25:55 2012] Updating source flux to 2e-13
[Fri Mar  9 05:30:27 2012] Flag b found in src. 40 procflags, skipping spectral fitting
[Fri Mar  9 05:30:27 2012] Flag p found in src. 40 procflags, skipping spectral fitting
[Fri Mar  9 05:30:27 2012] Flag c found in src. 40 procflags, skipping spectral fitting