[Wed Mar  7 15:38:44 2012] Detection parameters:
  Position = (211.3, 231.2) = 11 51 23.03 -62 44 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.5 +/- 16.8
  Background counts = 45.5
  Rate = 0.009 +/- 0.001

[Wed Mar  7 15:38:47 2012] Off-axis axis estimate = 7.98'
[Thu Mar  8 00:46:58 2012] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:46:58 2012] Initial guess for spatial extent in simple fitting = 10.42"
[Thu Mar  8 00:46:58 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.074
[Thu Mar  8 00:46:58 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 10.42"
[Thu Mar  8 05:49:55 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src51.ximg exists
[Thu Mar  8 05:49:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src51.csv
[Thu Mar  8 05:49:55 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src51_1.ximg exists
[Thu Mar  8 05:49:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src51.csv
[Thu Mar  8 05:49:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 05:49:57 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Thu Mar  8 05:49:57 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Thu Mar  8 05:49:57 2012] Fit fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Thu Mar  8 05:50:41 2012] Spatial fit model total counts = 647.128000, observed total counts = 647.000000
[Thu Mar  8 05:50:41 2012] Offset between fit and detection position for source 30 = 3.666975 pixels
[Thu Mar  8 05:50:41 2012] 650.962000 total counts/ 421.615000 bgd. counts: snr = 11.169534
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 3.666975 pixels
  Position = (208.3, 233.3) = 11 51 24.93 -62 44 19.1
  Extent = 20.8 (20.8-41.7)", rotation angle = 0
  Source counts = 229.3 +/- 25.5
  Background counts = 421.6
  Rate = 0.02 +/- 0.002
[Thu Mar  8 05:50:41 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 05:50:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 05:50:41 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 05:50:41 2012] Source does appear to be extended
[Thu Mar  8 05:50:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 05:50:41 2012] Source is confused with source 70
[Thu Mar  8 15:01:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 15:01:08 2012] Initial guess for spatial extent in simple fitting = 20.84"
[Thu Mar  8 15:01:08 2012] source mask rpix=4.8, npix_max = 111, mask sum = 121, frac = 1.081
[Thu Mar  8 15:01:08 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 20.84"
[Thu Mar  8 21:48:14 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src45.ximg exists
[Thu Mar  8 21:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src45.csv
[Thu Mar  8 21:48:14 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src45_1.ximg exists
[Thu Mar  8 21:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src45.csv
[Thu Mar  8 21:48:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 21:48:16 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Thu Mar  8 21:48:16 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Thu Mar  8 21:48:16 2012] Fit fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Thu Mar  8 21:49:02 2012] Warning, spatial fit 45 centroid is now closest to src. 70
[Thu Mar  8 21:49:02 2012] Spatial fit model total counts = 1615.040000, observed total counts = 1614.000000
[Thu Mar  8 21:49:02 2012] Offset between fit and detection position for source 30 = 4.309150 pixels
[Thu Mar  8 21:49:02 2012] Warning, changing simple spatial fit ID from 45 to 52
[Thu Mar  8 21:49:02 2012] 1605.468000 total counts/ 1038.850000 bgd. counts: snr = 17.579801
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 4.309150 pixels
  Position = (205.1, 236.1) = 11 51 26.99 -62 44 6.8
  Extent = 35.8 (35.8-71.7)", rotation angle = 0
  Source counts = 566.6 +/- 40.1
  Background counts = 1038.8
  Rate = 0.05 +/- 0.004
[Thu Mar  8 21:49:02 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 21:49:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 21:49:02 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 21:49:02 2012] Source does appear to be extended
[Thu Mar  8 21:49:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 01:23:06 2012] XMMSAS src. selection expression = ellipse(17792.902000, 20490.648000, 2150.928062, 2150.928062, 0.000000, X, Y)
[Fri Mar  9 01:23:06 2012] Writing source region out to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src30_src.reg
[Fri Mar  9 01:23:06 2012] Extracting stamp from image fullrun_mos2_xmm0503220201_pi300-10000_cl_sm2.00.img.gz, (81, 112) - (329, 360)
[Fri Mar  9 01:23:06 2012] XMMSAS bgd. selection expression = annulus(17792.902000, 20490.648000, 3584.880103, 7169.760206, X, Y) && !ellipse(21866.559440, 26928.682800, 1307.312038, 1307.312038, 0.000000, X, Y) && !ellipse(21869.971680, 25690.218800, 1299.544037, 1299.544037, 0.000000, X, Y) && !ellipse(21768.169600, 25666.410000, 2668.848077, 2668.848077, 0.000000, X, Y) && !ellipse(21441.960266, 28058.813660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21685.851400, 28772.744000, 2794.512080, 2794.512080, 0.000000, X, Y) && !ellipse(21379.086600, 25851.018000, 1321.944038, 1321.944038, 0.000000, X, Y) && !ellipse(21954.165863, 25094.218567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21679.482000, 24822.894600, 1334.424038, 1334.424038, 0.000000, X, Y) && !ellipse(20953.341949, 24579.740265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19517.151000, 23582.200600, 1473.752042, 1473.752042, 0.000000, X, Y) && !ellipse(19051.596000, 23426.481400, 1533.240044, 1533.240044, 0.000000, X, Y) && !ellipse(22092.344400, 23874.379200, 743.156821, 743.156821, 0.000000, X, Y) && !ellipse(17928.463089, 21313.796692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17584.828000, 20365.171600, 1697.120049, 696.299220, 1.688000, X, Y) && !ellipse(19388.880539, 24010.509949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20429.658661, 25722.382568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21741.175430, 23638.431488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15575.572144, 25881.137390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27657.350000, 15175.978000, 2695.536078, 2695.536078, 0.000000, X, Y) && !ellipse(21800.981293, 12623.223373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13841.628000, 21753.369200, 1838.736053, 1838.736053, 0.000000, X, Y)
[Fri Mar  9 01:23:06 2012] Writing fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src30.gif
[Fri Mar  9 02:35:41 2012] Mean detx,y = (10817.62, -1656.24) 
[Fri Mar  9 02:35:42 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 02:37:14 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 02:37:14 2012] Setting source spectrum file to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Mar  9 02:37:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Mar  9 05:25:51 2012] Updating aperture counts using extracted products
[Fri Mar  9 05:25:51 2012] Error reading totcts from fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Mar  9 05:25:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar  9 05:25:54 2012] Using photon index=1.80, rate=0.0523, arf fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src30.arf
[Fri Mar  9 05:25:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar  9 05:25:54 2012] Updating source flux to 8.9e-13
[Fri Mar  9 05:30:27 2012] Flag c found in src. 30 procflags, skipping spectral fitting