[Wed Mar  7 15:38:44 2012] Detection parameters:
  Position = (259.5, 361.9) = 11 50 52.41 -62 34 57.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 327.3 +/- 26.2
  Background counts = 59.2
  Rate = 0.03 +/- 0.003

[Wed Mar  7 15:38:47 2012] Off-axis axis estimate = 5.40'
[Thu Mar  8 00:46:58 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:46:58 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Thu Mar  8 00:46:58 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.926
[Thu Mar  8 00:46:58 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.13"
[Thu Mar  8 05:49:54 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src5.ximg exists
[Thu Mar  8 05:49:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src5.csv
[Thu Mar  8 05:49:54 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Mar  8 05:49:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src5.csv
[Thu Mar  8 05:49:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 05:49:56 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Mar  8 05:49:56 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Mar  8 05:49:56 2012] Fit fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Mar  8 05:50:40 2012] Spatial fit model total counts = 2195.790000, observed total counts = 2157.000000
[Thu Mar  8 05:50:40 2012] Offset between fit and detection position for source 17 = 2.941167 pixels
[Thu Mar  8 05:50:40 2012] Warning, changing simple spatial fit ID from 5 to 2
[Thu Mar  8 05:50:40 2012] 2088.295000 total counts/ 1524.250000 bgd. counts: snr = 14.447265
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 2.941167 pixels
  Position = (260.0, 359.0) = 11 50 52.10 -62 35 12.8
  Extent = 17.9 (17.8-18.0)", rotation angle = 0
  Source counts = 564.0 +/- 45.7
  Background counts = 1524.2
  Rate = 0.05 +/- 0.004
[Thu Mar  8 05:50:40 2012] Spatial fit model total counts = 1747.670000, observed total counts = 1719.000000
[Thu Mar  8 05:50:40 2012] Offset between fit and detection position for source 17 = 1.331857 pixels
[Thu Mar  8 05:50:40 2012] Warning, changing simple spatial fit ID from 2 to 5
[Thu Mar  8 05:50:40 2012] 1725.317000 total counts/ 1171.110000 bgd. counts: snr = 16.194710
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.331857 pixels
  Position = (258.8, 358.4) = 11 50 52.86 -62 35 15.2
  Extent = 18.2 (18.2-18.3)", rotation angle = 0
  Source counts = 554.2 +/- 41.5
  Background counts = 1171.1
  Rate = 0.05 +/- 0.004
[Thu Mar  8 05:50:41 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 05:50:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 05:50:41 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 05:50:41 2012] Source does appear to be extended
[Thu Mar  8 05:50:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 05:50:41 2012] Source is confused with source 33
[Thu Mar  8 05:50:41 2012] Source is confused with source 18
[Thu Mar  8 15:01:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 15:01:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar  8 15:01:08 2012] Initial guess for spatial extent in simple fitting = 18.25"
[Thu Mar  8 15:01:08 2012] source mask rpix=4.2, npix_max = 88, mask sum = 75, frac = 0.851
[Thu Mar  8 15:01:08 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 18.25"
[Thu Mar  8 21:48:13 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src3.ximg exists
[Thu Mar  8 21:48:13 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Mar  8 21:48:13 2012] Fit fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu Mar  8 21:48:15 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Mar  8 21:48:15 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Mar  8 21:48:15 2012] Fit fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Mar  8 21:49:02 2012] Warning, spatial fit 3 centroid is now closest to src. 33
[Thu Mar  8 21:49:02 2012] Spatial fit model total counts = 3786.510000, observed total counts = 3690.000000
[Thu Mar  8 21:49:02 2012] Offset between fit and detection position for source 17 = 4.417949 pixels
[Thu Mar  8 21:49:02 2012] Warning, changing simple spatial fit ID from 3 to 20
[Thu Mar  8 21:49:02 2012] 3477.230000 total counts/ 1807.730000 bgd. counts: snr = 39.266269
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 4.417949 pixels
  Position = (256.5, 354.6) = 11 50 54.30 -62 35 31.7
  Extent = 36.6 (33.7-73.2)" x 22.6 (18.2-26.5)", rotation angle = 126 (116-140) degrees
  Source counts = 1669.5 +/- 59.0
  Background counts = 1807.7
  Rate = 0.2 +/- 0.005
[Thu Mar  8 21:49:02 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 21:49:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 21:49:02 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 21:49:02 2012] Source does appear to be extended
[Thu Mar  8 21:49:02 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.27
[Fri Mar  9 01:23:04 2012] Counts = 1669.500000, rescaling region sizes by 2.000000
[Fri Mar  9 01:23:04 2012] XMMSAS src. selection expression = ellipse(22269.008000, 30804.674000, 4390.224126, 2714.952078, 125.529000, X, Y)
[Fri Mar  9 01:23:04 2012] Writing source region out to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src17_src.reg
[Fri Mar  9 01:23:04 2012] Extracting stamp from image fullrun_mos2_xmm0503220201_pi300-10000_cl_sm2.00.img.gz, (4, 102) - (509, 595)
[Fri Mar  9 01:23:04 2012] XMMSAS bgd. selection expression = annulus(22269.008000, 30804.674000, 14634.080421, 29268.160842, X, Y) && !ellipse(29676.855000, 17910.289600, 1479.520043, 1479.520043, 0.000000, X, Y) && !ellipse(21866.559440, 26928.682800, 1307.312038, 1307.312038, 0.000000, X, Y) && !ellipse(21989.574000, 29123.821000, 803.560023, 803.560023, 0.000000, X, Y) && !ellipse(22053.434200, 29987.060000, 1607.120046, 1607.120046, 0.000000, X, Y) && !ellipse(22062.588600, 29145.896000, 1343.792039, 1343.792039, 0.000000, X, Y) && !ellipse(21195.414246, 30050.802490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21869.971680, 25690.218800, 1299.544037, 1299.544037, 0.000000, X, Y) && !ellipse(21768.169600, 25666.410000, 2668.848077, 2668.848077, 0.000000, X, Y) && !ellipse(21426.915543, 29357.120331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21441.960266, 28058.813660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23023.492000, 32059.566000, 2919.664084, 2919.664084, 0.000000, X, Y) && !ellipse(21685.851400, 28772.744000, 2794.512080, 2794.512080, 0.000000, X, Y) && !ellipse(21379.086600, 25851.018000, 1321.944038, 1321.944038, 0.000000, X, Y) && !ellipse(33239.489000, 25867.467040, 967.152028, 967.152028, 0.000000, X, Y) && !ellipse(32561.506000, 24617.448000, 1332.984038, 1332.984038, 0.000000, X, Y) && !ellipse(21954.165863, 25094.218567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21679.482000, 24822.894600, 1334.424038, 1334.424038, 0.000000, X, Y) && !ellipse(27808.436000, 20592.524000, 1442.272042, 1442.272042, 0.000000, X, Y) && !ellipse(22553.154000, 31332.352000, 1463.408042, 1463.408042, 0.000000, X, Y) && !ellipse(28899.938000, 15227.410000, 1759.664051, 1759.664051, 0.000000, X, Y) && !ellipse(32960.480957, 24850.433777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20604.068863, 29523.341095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29059.866000, 19405.168000, 1460.664042, 1460.664042, 0.000000, X, Y) && !ellipse(29479.008000, 15502.720600, 1528.232044, 1528.232044, 0.000000, X, Y) && !ellipse(28544.329800, 15351.320400, 948.008027, 948.008027, 0.000000, X, Y) && !ellipse(20953.341949, 24579.740265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28256.942000, 20064.282000, 2723.640078, 2723.640078, 0.000000, X, Y) && !ellipse(29060.309296, 22254.542603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20135.096000, 29096.850000, 1083.624031, 1083.624031, 0.000000, X, Y) && !ellipse(29528.008636, 22757.203369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28393.196000, 19350.668200, 1523.936044, 1523.936044, 0.000000, X, Y) && !ellipse(24529.002655, 31580.277252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30014.895874, 19137.722733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19517.151000, 23582.200600, 1473.752042, 1473.752042, 0.000000, X, Y) && !ellipse(20569.498000, 31882.952000, 1517.536044, 1517.536044, 0.000000, X, Y) && !ellipse(19051.596000, 23426.481400, 1533.240044, 1533.240044, 0.000000, X, Y) && !ellipse(22092.344400, 23874.379200, 743.156821, 743.156821, 0.000000, X, Y) && !ellipse(31252.336200, 32986.326000, 1058.952030, 1058.952030, 0.000000, X, Y) && !ellipse(32227.953064, 24989.129852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28915.519928, 19117.596283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17928.463089, 21313.796692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28773.746674, 20098.410568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17584.828000, 20365.171600, 1697.120049, 696.299220, 1.688000, X, Y) && !ellipse(17792.902000, 20490.648000, 2867.904083, 2867.904083, 0.000000, X, Y) && !ellipse(20071.440781, 30307.671265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28593.312000, 15419.340000, 1347.768039, 1347.768039, 0.000000, X, Y) && !ellipse(19388.880539, 24010.509949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21366.680000, 32835.976000, 1531.584044, 1531.584044, 0.000000, X, Y) && !ellipse(31410.393400, 33446.140000, 1592.320046, 1592.320046, 0.000000, X, Y) && !ellipse(23278.082000, 32747.458000, 1485.824043, 1485.824043, 0.000000, X, Y) && !ellipse(33464.217010, 24349.671356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30564.778992, 23339.833618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20429.658661, 25722.382568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21741.175430, 23638.431488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30334.463165, 34781.512451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27964.774000, 15277.870000, 1811.432052, 1811.432052, 0.000000, X, Y) && !ellipse(25998.880600, 22770.418600, 926.400027, 926.400027, 0.000000, X, Y) && !ellipse(15575.572144, 25881.137390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31743.065063, 25009.331970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24344.430328, 32516.822906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24085.936676, 31271.749573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24832.795534, 31647.514000, 1435.784041, 1435.784041, 0.000000, X, Y) && !ellipse(27657.350000, 15175.978000, 2695.536078, 2695.536078, 0.000000, X, Y) && !ellipse(21800.981293, 12623.223373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13841.628000, 21753.369200, 1838.736053, 1838.736053, 0.000000, X, Y)
[Fri Mar  9 01:23:04 2012] Writing fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src17.gif
[Fri Mar  9 01:29:36 2012] Mean detx,y = (2010.39, 4207.05) 
[Fri Mar  9 01:29:38 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 01:39:31 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 01:39:31 2012] Setting source spectrum file to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Mar  9 01:39:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri Mar  9 05:25:49 2012] Updating aperture counts using extracted products
[Fri Mar  9 05:25:49 2012] Error reading totcts from fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Mar  9 05:25:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar  9 05:25:52 2012] Using photon index=1.80, rate=0.154, arf fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src17.arf
[Fri Mar  9 05:25:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar  9 05:25:52 2012] Updating source flux to 1.7e-12
[Fri Mar  9 05:30:27 2012] Flag c found in src. 17 procflags, skipping spectral fitting