[Wed Mar  7 15:38:43 2012] Detection parameters:
  Position = (341.1, 195.0) = 11 50 0.80 -62 47 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.5 +/- 23.1
  Background counts = 72.8
  Rate = 0.03 +/- 0.003

[Wed Mar  7 15:38:47 2012] Off-axis axis estimate = 8.11'
[Thu Mar  8 00:46:58 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:46:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar  8 00:46:58 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Thu Mar  8 00:46:58 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.062
[Thu Mar  8 00:46:58 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.49"
[Thu Mar  8 05:49:54 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src7.ximg exists
[Thu Mar  8 05:49:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src7.csv
[Thu Mar  8 05:49:54 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Mar  8 05:49:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src7.csv
[Thu Mar  8 05:49:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 05:49:56 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Mar  8 05:49:56 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Mar  8 05:49:56 2012] Fit fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Mar  8 05:50:40 2012] Spatial fit model total counts = 2152.720000, observed total counts = 2157.000000
[Thu Mar  8 05:50:40 2012] Offset between fit and detection position for source 15 = 9.215999 pixels
[Thu Mar  8 05:50:40 2012] Warning, changing simple spatial fit ID from 7 to 1
[Thu Mar  8 05:50:40 2012] 2205.260036 total counts/ 2205.260000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 9.215999 pixels
  Position = (349.8, 198.2) = 11 49 55.34 -62 46 52.0
  Extent = 20.2 (20.1-40.4)", rotation angle = 0
  Source counts = 0.0 +/- 47.0
  Background counts = 2205.3
  Rate = 3e-09 +/- 0.004
  Deleting source due to low Poisson probability