[Wed Mar  7 15:38:43 2012] Detection parameters:
  Position = (251.8, 296.0) = 11 50 57.35 -62 39 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 250.0 +/- 23.7
  Background counts = 66.1
  Rate = 0.02 +/- 0.002

[Wed Mar  7 15:38:47 2012] Off-axis axis estimate = 3.39'
[Thu Mar  8 00:46:58 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:46:58 2012] Initial guess for spatial extent in simple fitting = 8.12"
[Thu Mar  8 00:46:58 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.892
[Thu Mar  8 00:46:58 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.12"
[Thu Mar  8 05:49:54 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src11.ximg exists
[Thu Mar  8 05:49:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src11.csv
[Thu Mar  8 05:49:54 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Mar  8 05:49:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src11.csv
[Thu Mar  8 05:49:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 05:49:56 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Mar  8 05:49:56 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Mar  8 05:49:56 2012] Fit fullrun_mos2_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Mar  8 05:50:40 2012] Spatial fit model total counts = 1495.110000, observed total counts = 1493.000000
[Thu Mar  8 05:50:40 2012] Offset between fit and detection position for source 13 = 0.241183 pixels
[Thu Mar  8 05:50:40 2012] 1409.757000 total counts/ 1108.830000 bgd. counts: snr = 9.037091
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.241183 pixels
  Position = (251.9, 295.8) = 11 50 57.26 -62 39 47.4
  Extent = 16.2 (12.6-32.5)", rotation angle = 0
  Source counts = 300.9 +/- 37.5
  Background counts = 1108.8
  Rate = 0.03 +/- 0.003
[Thu Mar  8 05:50:41 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 05:50:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 05:50:41 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 05:50:41 2012] Source does appear to be extended
[Thu Mar  8 05:50:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 05:50:41 2012] Source is confused with source 12
[Thu Mar  8 05:50:41 2012] Source is confused with source 22
[Thu Mar  8 05:50:41 2012] Source is confused with source 24
[Thu Mar  8 05:50:41 2012] Source is confused with source 25
[Thu Mar  8 15:01:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 15:01:08 2012] Initial guess for spatial extent in simple fitting = 16.24"
[Thu Mar  8 15:01:08 2012] source mask rpix=3.7, npix_max = 71, mask sum = 64, frac = 0.892
[Thu Mar  8 15:01:08 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 16.24"
[Thu Mar  8 21:48:13 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src8.ximg exists
[Thu Mar  8 21:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src8.csv
[Thu Mar  8 21:48:13 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Mar  8 21:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src8.csv
[Thu Mar  8 21:48:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 21:48:15 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Mar  8 21:48:15 2012] fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Mar  8 21:48:15 2012] Fit fullrun_mos2_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Mar  8 21:49:02 2012] Warning, spatial fit 8 centroid is now closest to src. 58
[Thu Mar  8 21:49:02 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 21:49:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 21:49:02 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 21:49:02 2012] Source does appear to be extended
[Thu Mar  8 21:49:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 01:23:04 2012] XMMSAS src. selection expression = ellipse(21869.971680, 25690.218800, 974.658028, 974.658028, 0.000000, X, Y)
[Fri Mar  9 01:23:04 2012] Writing source region out to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src13_src.reg
[Fri Mar  9 01:23:04 2012] Extracting stamp from image fullrun_mos2_xmm0503220201_pi300-10000_cl_sm2.00.img.gz, (196, 240) - (308, 352)
[Fri Mar  9 01:23:04 2012] XMMSAS bgd. selection expression = annulus(21869.971680, 25690.218800, 1624.430047, 3248.860093, X, Y) && !ellipse(21866.559440, 26928.682800, 1307.312038, 1307.312038, 0.000000, X, Y) && !ellipse(22269.008000, 30804.674000, 2926.816084, 1809.968052, 125.529000, X, Y) && !ellipse(21989.574000, 29123.821000, 803.560023, 803.560023, 0.000000, X, Y) && !ellipse(22053.434200, 29987.060000, 1607.120046, 1607.120046, 0.000000, X, Y) && !ellipse(22062.588600, 29145.896000, 1343.792039, 1343.792039, 0.000000, X, Y) && !ellipse(21768.169600, 25666.410000, 2668.848077, 2668.848077, 0.000000, X, Y) && !ellipse(21426.915543, 29357.120331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21441.960266, 28058.813660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21685.851400, 28772.744000, 2794.512080, 2794.512080, 0.000000, X, Y) && !ellipse(21379.086600, 25851.018000, 1321.944038, 1321.944038, 0.000000, X, Y) && !ellipse(21954.165863, 25094.218567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21679.482000, 24822.894600, 1334.424038, 1334.424038, 0.000000, X, Y) && !ellipse(20604.068863, 29523.341095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20953.341949, 24579.740265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20135.096000, 29096.850000, 1083.624031, 1083.624031, 0.000000, X, Y) && !ellipse(19517.151000, 23582.200600, 1473.752042, 1473.752042, 0.000000, X, Y) && !ellipse(19051.596000, 23426.481400, 1533.240044, 1533.240044, 0.000000, X, Y) && !ellipse(22092.344400, 23874.379200, 743.156821, 743.156821, 0.000000, X, Y) && !ellipse(17792.902000, 20490.648000, 2867.904083, 2867.904083, 0.000000, X, Y) && !ellipse(19388.880539, 24010.509949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20429.658661, 25722.382568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21741.175430, 23638.431488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25998.880600, 22770.418600, 926.400027, 926.400027, 0.000000, X, Y)
[Fri Mar  9 01:23:04 2012] Writing fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src13.gif
[Fri Mar  9 01:40:45 2012] Mean detx,y = (4792.43, 431.65) 
[Fri Mar  9 01:40:46 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 01:41:04 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 01:41:04 2012] Setting source spectrum file to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Mar  9 01:41:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Mar  9 05:25:49 2012] Updating aperture counts using extracted products
[Fri Mar  9 05:25:49 2012] Error reading totcts from fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Mar  9 05:25:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar  9 05:25:52 2012] Using photon index=1.80, rate=0.0278, arf fullrun_mos2_xmm0503220201_pi300-10000_pass1_cl_src13.arf
[Fri Mar  9 05:25:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar  9 05:25:52 2012] Updating source flux to 3.4e-13
[Fri Mar  9 05:30:27 2012] Flag c found in src. 13 procflags, skipping spectral fitting