[Wed Mar  7 15:37:21 2012] Detection parameters:
  Position = (306.2, 241.5) = 11 50 22.99 -62 43 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.5 +/- 14.5
  Background counts = 68.8
  Rate = 0.008 +/- 0.002

[Wed Mar  7 15:37:21 2012] Off-axis axis estimate = 4.16'
[Wed Mar  7 21:06:09 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 21:06:09 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Wed Mar  7 21:06:09 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.994
[Wed Mar  7 21:06:09 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 8.51"
[Thu Mar  8 00:46:56 2012] fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_src39.ximg exists
[Thu Mar  8 00:46:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_src39.csv
[Thu Mar  8 00:46:56 2012] fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_src39_1.ximg exists
[Thu Mar  8 00:46:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_src39.csv
[Thu Mar  8 00:46:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 00:46:57 2012] fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Thu Mar  8 00:46:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src39.csv
[Thu Mar  8 00:46:57 2012] fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Thu Mar  8 00:46:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src39.csv
[Thu Mar  8 00:46:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 05:50:25 2012] Spatial fit model total counts = 800.992000, observed total counts = 782.000000
[Thu Mar  8 05:50:25 2012] Offset between fit and detection position for source 45 = 0.078549 pixels
[Thu Mar  8 05:50:25 2012] Warning, changing simple spatial fit ID from 39 to 37
[Thu Mar  8 05:50:25 2012] 803.451600 total counts/ 787.406000 bgd. counts: snr = 0.571816
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.078549 pixels
  Position = (306.3, 241.5) = 11 50 22.94 -62 43 44.0
  Extent = 2.1" x 2.1", rotation angle = 0
  Source counts = 16.0 +/- 28.3
  Background counts = 787.4
  Rate = 0.001 +/- 0.003
  Deleting source due to low Poisson probability