[Wed Mar  7 15:37:21 2012] Detection parameters:
  Position = (344.7, 262.3) = 11 49 58.60 -62 42 15.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.7 +/- 18.5
  Background counts = 93.3
  Rate = 0.01 +/- 0.002

[Wed Mar  7 15:37:21 2012] Off-axis axis estimate = 4.26'
[Wed Mar  7 21:06:09 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 21:06:09 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Wed Mar  7 21:06:09 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.986
[Wed Mar  7 21:06:09 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 8.56"
[Thu Mar  8 00:46:55 2012] fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_src20.ximg exists
[Thu Mar  8 00:46:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_src20.csv
[Thu Mar  8 00:46:55 2012] fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu Mar  8 00:46:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_src20.csv
[Thu Mar  8 00:46:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 00:46:57 2012] fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu Mar  8 00:46:57 2012] fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Mar  8 00:46:57 2012] Fit fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Thu Mar  8 05:50:25 2012] Spatial fit model total counts = 925.701000, observed total counts = 930.000000
[Thu Mar  8 05:50:25 2012] Offset between fit and detection position for source 29 = 1.046968 pixels
[Thu Mar  8 05:50:25 2012] Warning, changing simple spatial fit ID from 20 to 19
[Thu Mar  8 05:50:25 2012] 904.784100 total counts/ 859.313000 bgd. counts: snr = 1.551171
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 1.046968 pixels
  Position = (343.7, 262.2) = 11 49 59.27 -62 42 13.7
  Extent = 6.8 (3.0-15.4)", rotation angle = 0
  Source counts = 45.5 +/- 30.1
  Background counts = 859.3
  Rate = 0.004 +/- 0.003
  Deleting source due to low Poisson probability