[Wed Mar  7 15:37:20 2012] Detection parameters:
  Position = (245.4, 302.0) = 11 51 1.37 -62 39 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.6 +/- 20.1
  Background counts = 72.4
  Rate = 0.02 +/- 0.002

[Wed Mar  7 15:37:21 2012] Off-axis axis estimate = 3.85'
[Wed Mar  7 21:06:09 2012] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 21:06:09 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Wed Mar  7 21:06:09 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.853
[Wed Mar  7 21:06:09 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.36"
[Thu Mar  8 00:46:55 2012] fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_src17.ximg exists
[Thu Mar  8 00:46:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_src17.csv
[Thu Mar  8 00:46:55 2012] fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu Mar  8 00:46:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_src17.csv
[Thu Mar  8 00:46:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 00:46:57 2012] fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu Mar  8 00:46:57 2012] fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu Mar  8 00:46:57 2012] Fit fullrun_mos1_xmm0503220201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Thu Mar  8 05:50:25 2012] Warning, spatial fit 17 centroid is now closest to src. 38
[Thu Mar  8 05:50:25 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 05:50:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 05:50:25 2012] Assessing source extent using major
[Thu Mar  8 05:50:25 2012] Source does appear to be extended
[Thu Mar  8 05:50:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 05:50:25 2012] Source is confused with source 16
[Thu Mar  8 11:11:34 2012] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 11:11:34 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Thu Mar  8 11:11:34 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.853
[Thu Mar  8 11:11:34 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 8.36"
[Thu Mar  8 15:01:05 2012] fullrun_mos1_xmm0503220201_pi300-10000_cl_pass1_src16.ximg exists
[Thu Mar  8 15:01:05 2012] fullrun_mos1_xmm0503220201_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu Mar  8 15:01:05 2012] Fit fullrun_mos1_xmm0503220201_pi300-10000_cl_pass1_src16 appears to have run properly
[Thu Mar  8 15:01:07 2012] fullrun_mos1_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu Mar  8 15:01:07 2012] fullrun_mos1_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Mar  8 15:01:07 2012] Fit fullrun_mos1_xmm0503220201_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Thu Mar  8 21:48:46 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 10.530777 pixels away
[Thu Mar  8 21:48:47 2012] Warning, spatial fit 16 centroid is now closest to src. 38
[Thu Mar  8 21:48:47 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 21:48:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 21:48:47 2012] Assessing source extent using major
[Thu Mar  8 21:48:47 2012] Source does appear to be extended
[Thu Mar  8 21:48:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 00:19:52 2012] XMMSAS src. selection expression = ellipse(21301.649933, 26229.511749, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar  9 00:19:52 2012] Writing source region out to fullrun_mos1_xmm0503220201_pi300-10000_pass1_cl_src18_src.reg
[Fri Mar  9 00:19:52 2012] Extracting stamp from image fullrun_mos1_xmm0503220201_pi300-10000_cl_sm2.00.img.gz, (208, 265) - (283, 340)
[Fri Mar  9 00:19:52 2012] XMMSAS bgd. selection expression = annulus(21301.649933, 26229.511749, 1087.500000, 2175.000000, X, Y) && !ellipse(21722.911600, 27095.670000, 1320.992038, 1320.992038, 0.000000, X, Y) && !ellipse(21716.743851, 27385.633636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22155.018000, 28843.140000, 1342.320039, 1342.320039, 0.000000, X, Y) && !ellipse(21550.113200, 25042.424000, 1322.648038, 1322.648038, 0.000000, X, Y) && !ellipse(21562.263626, 28923.654938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21107.790314, 27703.172485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21961.051800, 25817.724800, 1299.568037, 1299.568037, 0.000000, X, Y) && !ellipse(21867.488449, 28315.860321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20058.084656, 24288.454346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21060.980820, 24339.622070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21955.580000, 23475.716000, 1340.304039, 1340.304039, 0.000000, X, Y) && !ellipse(18678.368600, 23508.408400, 938.512027, 938.512027, 0.000000, X, Y) && !ellipse(20372.389679, 27452.805878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19982.732269, 28832.239624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20114.206665, 23499.366364, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 00:19:52 2012] Writing fullrun_mos1_xmm0503220201_pi300-10000_pass1_cl_src18.gif
[Fri Mar  9 00:24:13 2012] Mean detx,y = (1285.42, -5025.74) 
[Fri Mar  9 00:24:14 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 00:24:29 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 00:24:29 2012] Setting source spectrum file to fullrun_mos1_xmm0503220201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Mar  9 00:24:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503220201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri Mar  9 00:56:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar  9 00:56:40 2012] rmf not generated due to insufficient counts
[Fri Mar  9 05:25:44 2012] Updating aperture counts using extracted products
[Fri Mar  9 05:25:44 2012] Error reading totcts from fullrun_mos1_xmm0503220201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Mar  9 05:25:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar  9 05:25:47 2012] Using photon index=1.80, rate=0.0154, arf fullrun_mos1_xmm0503220201_pi300-10000_pass1_cl_src18.arf
[Fri Mar  9 05:25:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar  9 05:25:47 2012] Updating source flux to 2e-13
[Fri Mar  9 05:25:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting