[Sat Dec 24 10:44:59 2011] Detection parameters:
  Position = (131.4, 374.7) = 11 52 54.91 -62 16 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.3 +/- 18.6
  Background counts = 53.7
  Rate = 0.007 +/- 0.001

[Sat Dec 24 10:45:01 2011] Off-axis axis estimate = 13.31'
[Sat Dec 24 10:51:38 2011] Using EEF radius (= 13.08 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 10:51:38 2011] Initial guess for spatial extent in simple fitting = 13.08"
[Sat Dec 24 10:51:38 2011] source mask rpix=3.0, npix_max = 49, mask sum = 48, frac = 0.975
[Sat Dec 24 10:51:38 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 13.08"
[Sat Dec 24 18:32:06 2011] fullrun_pn_xmm0503220101_pi300-10000_cl_pass0_src30.ximg exists
[Sat Dec 24 18:32:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220101_pi300-10000_cl_pass0_src30.csv
[Sat Dec 24 18:32:06 2011] fullrun_pn_xmm0503220101_pi300-10000_cl_pass0_src30_1.ximg exists
[Sat Dec 24 18:32:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220101_pi300-10000_cl_pass0_src30.csv
[Sat Dec 24 18:32:06 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503220101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503220101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 18:32:08 2011] fullrun_pn_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sat Dec 24 18:32:08 2011] fullrun_pn_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sat Dec 24 18:32:08 2011] Fit fullrun_pn_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Sun Dec 25 09:36:48 2011] Spatial fit model total counts = 1188.420000, observed total counts = 1186.000000
[Sun Dec 25 09:36:48 2011] Offset between fit and detection position for source 31 = 0.527747 pixels
[Sun Dec 25 09:36:48 2011] Warning, changing simple spatial fit ID from 30 to 28
[Sun Dec 25 09:36:48 2011] 1043.826400 total counts/ 997.022000 bgd. counts: snr = 1.482294
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.527747 pixels
  Position = (131.4, 374.1) = 11 52 54.95 -62 16 35.5
  Extent = 7.1 (5.5-10.5)", rotation angle = 0
  Source counts = 46.8 +/- 32.3
  Background counts = 997.0
  Rate = 0.004 +/- 0.003
  Deleting source due to low Poisson probability