[Sat Dec 24 10:44:58 2011] Detection parameters:
  Position = (294.4, 364.0) = 11 51 13.29 -62 17 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3677.0 +/- 77.6
  Background counts = 204.9
  Rate = 0.3 +/- 0.007

[Sat Dec 24 10:45:01 2011] Off-axis axis estimate = 4.76'
[Sat Dec 24 10:51:38 2011] Using EEF radius (= 8.81 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 10:51:38 2011] Initial guess for spatial extent in simple fitting = 8.81"
[Sat Dec 24 10:51:38 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.980
[Sat Dec 24 10:51:38 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 8.81"
[Sat Dec 24 18:32:05 2011] fullrun_pn_xmm0503220101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Dec 24 18:32:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220101_pi300-10000_cl_pass0_src1.csv
[Sat Dec 24 18:32:05 2011] fullrun_pn_xmm0503220101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Dec 24 18:32:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220101_pi300-10000_cl_pass0_src1.csv
[Sat Dec 24 18:32:05 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503220101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503220101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 18:32:07 2011] fullrun_pn_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Dec 24 18:32:07 2011] fullrun_pn_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Dec 24 18:32:07 2011] Fit fullrun_pn_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 25 09:36:48 2011] Spatial fit model total counts = 15755.700000, observed total counts = 15789.000000
[Sun Dec 25 09:36:48 2011] Offset between fit and detection position for source 1 = 3.646626 pixels
[Sun Dec 25 09:36:48 2011] 14402.190000 total counts/ 4790.390000 bgd. counts: snr = 138.873471
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.646626 pixels
  Position = (293.8, 367.6) = 11 51 13.68 -62 17 6.3
  Extent = 17.6 (17.5-35.2)", rotation angle = 0
  Source counts = 9611.8 +/- 120.0
  Background counts = 4790.4
  Rate = 0.9 +/- 0.01
[Sun Dec 25 09:36:48 2011] Spatial fit model total counts = 13802.800000, observed total counts = 13801.000000
[Sun Dec 25 09:36:48 2011] Offset between fit and detection position for source 1 = 1.111643 pixels
[Sun Dec 25 09:36:48 2011] Warning, changing simple spatial fit ID from 1 to 25
[Sun Dec 25 09:36:48 2011] 13938.090000 total counts/ 5304.910000 bgd. counts: snr = 118.530956
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.111643 pixels
  Position = (294.1, 368.7) = 11 51 13.48 -62 17 1.7
  Extent = 18.2 (18.2-36.4)", rotation angle = 0
  Source counts = 8633.2 +/- 118.1
  Background counts = 5304.9
  Rate = 0.8 +/- 0.01
[Sun Dec 25 09:36:48 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 09:36:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 09:36:48 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 09:36:48 2011] Source does appear to be extended
[Sun Dec 25 09:36:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 09:36:48 2011] Source is confused with source 26
[Sun Dec 25 09:38:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 09:38:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 25 09:38:00 2011] Initial guess for spatial extent in simple fitting = 18.20"
[Sun Dec 25 09:38:00 2011] source mask rpix=4.2, npix_max = 87, mask sum = 86, frac = 0.980
[Sun Dec 25 09:38:00 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 18.20"
[Sun Dec 25 20:06:27 2011] fullrun_pn_xmm0503220101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Dec 25 20:06:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220101_pi300-10000_cl_pass1_src1.csv
[Sun Dec 25 20:06:27 2011] fullrun_pn_xmm0503220101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Dec 25 20:06:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503220101_pi300-10000_cl_pass1_src1.csv
[Sun Dec 25 20:06:27 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503220101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503220101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 20:06:28 2011] fullrun_pn_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 25 20:06:28 2011] fullrun_pn_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 25 20:06:28 2011] Fit fullrun_pn_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Dec 26 20:26:46 2011] Warning, spatial fit 1 centroid is now closest to src. 7
[Mon Dec 26 20:26:47 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 20:26:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 20:26:47 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 20:26:47 2011] Source does appear to be extended
[Mon Dec 26 20:26:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 20:28:12 2011] Counts = 8633.180000, rescaling region sizes by 2.000000
[Mon Dec 26 20:28:12 2011] XMMSAS src. selection expression = ellipse(25539.881600, 32027.452000, 2184.432063, 2184.432063, 0.000000, X, Y)
[Mon Dec 26 20:28:12 2011] Writing source region out to fullrun_pn_xmm0503220101_pi300-10000_pass1_cl_src1_src.reg
[Mon Dec 26 20:28:12 2011] Extracting stamp from image fullrun_pn_xmm0503220101_pi300-10000_cl_sm2.00.img.gz, (169, 243) - (420, 494)
[Mon Dec 26 20:28:12 2011] XMMSAS bgd. selection expression = annulus(25539.881600, 32027.452000, 7281.440210, 14562.880419, X, Y) && !ellipse(26812.308000, 32119.007600, 1438.136041, 911.720026, 19.296300, X, Y) && !ellipse(24310.469849, 31956.648895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24387.436800, 31548.280000, 1272.688037, 1272.688037, 0.000000, X, Y) && !ellipse(22195.864000, 32984.560000, 1619.880047, 1619.880047, 0.000000, X, Y) && !ellipse(22462.584000, 31451.522000, 1421.984041, 1137.808033, 71.078000, X, Y) && !ellipse(23954.732000, 30595.764000, 2671.552077, 1861.016054, 33.732300, X, Y) && !ellipse(24944.456329, 30908.809723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23740.558000, 30703.232000, 1393.936040, 1393.936040, 0.000000, X, Y) && !ellipse(26585.134000, 31028.815600, 1359.000039, 1171.488034, 22.841000, X, Y) && !ellipse(25136.022003, 30141.028351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27644.750000, 30184.844000, 905.688026, 905.688026, 0.000000, X, Y) && !ellipse(25408.935460, 29524.782000, 1870.432054, 911.640026, 57.268000, X, Y) && !ellipse(24516.622000, 30043.014000, 1335.776038, 1335.776038, 0.000000, X, Y) && !ellipse(28157.325867, 29433.725891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25427.866000, 29705.670000, 1315.024038, 1315.024038, 0.000000, X, Y) && !ellipse(29045.279175, 28476.210815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30109.184800, 28684.102800, 2719.184078, 583.990417, 60.015000, X, Y) && !ellipse(31435.472000, 26788.382000, 1427.176041, 1427.176041, 0.000000, X, Y) && !ellipse(29355.885742, 27856.378296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31578.222000, 26552.260000, 2430.272070, 2430.272070, 0.000000, X, Y) && !ellipse(31881.588562, 26309.075012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30690.008759, 25753.276489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32384.915600, 25403.258000, 1141.488033, 1141.488033, 0.000000, X, Y) && !ellipse(35066.348000, 22775.478600, 379.141611, 379.141611, 0.000000, X, Y) && !ellipse(25151.240000, 32573.930200, 1456.288042, 1456.288042, 0.000000, X, Y) && !ellipse(11538.847015, 34121.235870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12609.669449, 33351.601288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12527.233100, 32803.058000, 1391.592040, 1391.592040, 0.000000, X, Y) && !ellipse(12738.206000, 32495.406000, 1726.848050, 1726.848050, 0.000000, X, Y) && !ellipse(10484.848839, 32406.878143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13082.300000, 31511.786000, 1983.912057, 1983.912057, 0.000000, X, Y) && !ellipse(29994.378000, 28738.840000, 1359.592039, 1359.592039, 0.000000, X, Y) && !ellipse(29954.042603, 26736.978119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33159.558000, 25905.050000, 1898.192055, 1898.192055, 0.000000, X, Y) && !ellipse(33480.146000, 25309.833200, 949.144027, 949.144027, 0.000000, X, Y) && !ellipse(34236.180200, 24051.851000, 1450.200042, 1450.200042, 0.000000, X, Y) && !ellipse(33423.204000, 22924.334000, 1168.520034, 1168.520034, 0.000000, X, Y) && !ellipse(21292.776000, 34072.206000, 3239.760093, 3239.760093, 0.000000, X, Y) && !ellipse(21827.501053, 33786.864136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31314.997345, 24109.431030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34515.662000, 23463.176000, 1486.288043, 1486.288043, 0.000000, X, Y) && !ellipse(27162.353638, 33585.445648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20076.654000, 42821.282000, 2172.728063, 2172.728063, 0.000000, X, Y) && !ellipse(21212.286200, 40565.432000, 2023.504058, 1082.800031, 230.915000, X, Y) && !ellipse(21460.763800, 40186.218000, 1465.536042, 1465.536042, 0.000000, X, Y)
[Mon Dec 26 20:28:12 2011] Writing fullrun_pn_xmm0503220101_pi300-10000_pass1_cl_src1.gif
[Mon Dec 26 20:29:10 2011] Mean detx,y = (1029.47, -3962.37) 
[Mon Dec 26 20:29:21 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 20:47:04 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 20:47:04 2011] Setting source spectrum file to fullrun_pn_xmm0503220101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 26 20:47:04 2011] Setting bgd. spectrum file to fullrun_pn_xmm0503220101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Dec 31 07:05:56 2011] Updating aperture counts using extracted products
[Sat Dec 31 07:05:56 2011] Error reading totcts from fullrun_pn_xmm0503220101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Dec 31 07:06:00 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 07:06:00 2011] Using photon index=1.80, rate=0.798, arf fullrun_pn_xmm0503220101_pi300-10000_pass1_cl_src1.arf
[Sat Dec 31 07:06:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 07:06:00 2011] Updating source flux to 2.1e-12
[Sat Dec 31 07:27:00 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat Dec 31 07:38:31 2011] Reading fit data from xmm0503220101/analysis//spectral/fullrun_pn_xmm0503220101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Dec 31 07:38:31 2011] Spectral fit parameter nH value = 7.98089e+21
[Sat Dec 31 07:38:31 2011] Spectral fit parameter PhoIndex value = 9.741
[Sat Dec 31 07:38:31 2011] Failed to get F(0.3-8.0) from xmm0503220101/analysis//spectral/fullrun_pn_xmm0503220101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Dec 31 07:38:31 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 07:38:31 2011] Using Nh = 8e+21, photon index=9.74, rate=0.798, arf fullrun_pn_xmm0503220101_pi300-10000_pass1_cl_src1.arf
[Sat Dec 31 07:38:31 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 07:38:31 2011] Updating source flux to 1e-12