[Sat Dec 24 10:47:01 2011] Detection parameters:
  Position = (362.9, 290.2) = 11 50 30.46 -62 22 45.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.9 +/- 20.4
  Background counts = 110.3
  Rate = 0.007 +/- 0.001

[Sat Dec 24 10:47:01 2011] Off-axis axis estimate = 4.71'
[Sat Dec 24 23:36:09 2011] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 23:36:09 2011] Initial guess for spatial extent in simple fitting = 8.78"
[Sat Dec 24 23:36:09 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.985
[Sat Dec 24 23:36:09 2011] Giving source the simple spatial ID 49 for pass 0, mean size = 8.78"
[Sun Dec 25 09:36:14 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src49.ximg exists
[Sun Dec 25 09:36:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src49.csv
[Sun Dec 25 09:36:14 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src49_1.ximg exists
[Sun Dec 25 09:36:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src49.csv
[Sun Dec 25 09:36:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 09:36:19 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Sun Dec 25 09:36:19 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Sun Dec 25 09:36:19 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Sun Dec 25 09:37:32 2011] Warning, spatial fit 49 centroid is now closest to src. 62
[Sun Dec 25 09:37:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 09:37:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 09:37:32 2011] Assessing source extent using major
[Sun Dec 25 09:37:32 2011] Source does appear to be extended
[Sun Dec 25 09:37:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 09:37:32 2011] Source is confused with source 32
[Sun Dec 25 09:37:32 2011] Source is confused with source 62
[Mon Dec 26 05:27:19 2011] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 05:27:19 2011] Initial guess for spatial extent in simple fitting = 8.78"
[Mon Dec 26 05:27:19 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.985
[Mon Dec 26 05:27:19 2011] Giving source the simple spatial ID 47 for pass 1, mean size = 8.78"
[Mon Dec 26 20:26:22 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src47.ximg exists
[Mon Dec 26 20:26:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src47.csv
[Mon Dec 26 20:26:22 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src47_1.ximg exists
[Mon Dec 26 20:26:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src47.csv
[Mon Dec 26 20:26:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 20:26:23 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Mon Dec 26 20:26:23 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Mon Dec 26 20:26:23 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Mon Dec 26 20:27:36 2011] Source 61 is offset by -1.322737 and -8.881550 pixels which is larger than
2 X fitted extent = 8.077839 x 8.077839, not incorporating fit results
[Mon Dec 26 20:27:36 2011] Spatial fit model total counts = 780.309000, observed total counts = 777.000000
[Mon Dec 26 20:27:36 2011] Offset between fit and detection position for source 61 = 7.724315 pixels
[Mon Dec 26 20:27:36 2011] Warning, changing simple spatial fit ID from 47 to 52
[Mon Dec 26 20:27:36 2011] 788.516000 total counts/ 686.077000 bgd. counts: snr = 3.910920
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 7.724315 pixels
  Position = (370.1, 292.9) = 11 50 25.94 -62 22 30.9
  Extent = 17.8 (17.5-17.9)", rotation angle = 0
  Source counts = 102.4 +/- 28.1
  Background counts = 686.1
  Rate = 0.008 +/- 0.002
[Mon Dec 26 20:27:36 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 20:27:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 20:27:36 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 20:27:36 2011] Source does appear to be extended
[Mon Dec 26 20:27:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 19:32:22 2011] XMMSAS src. selection expression = ellipse(32153.914000, 25433.892000, 1066.572031, 1066.572031, 0.000000, X, Y)
[Fri Dec 30 19:32:22 2011] Writing source region out to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src61_src.reg
[Fri Dec 30 19:32:22 2011] Extracting stamp from image fullrun_mos2_xmm0503220101_pi300-10000_cl_sm2.00.img.gz, (309, 232) - (431, 354)
[Fri Dec 30 19:32:22 2011] XMMSAS bgd. selection expression = annulus(32153.914000, 25433.892000, 1777.620051, 3555.240102, X, Y) && !ellipse(35132.461000, 22802.979400, 558.253616, 558.253616, 0.000000, X, Y) && !ellipse(31711.718000, 26318.446000, 2874.528083, 2018.472058, 37.699900, X, Y) && !ellipse(31217.430000, 26723.900000, 1410.488041, 1410.488041, 0.000000, X, Y) && !ellipse(27959.665400, 29756.422200, 1316.576038, 1316.576038, 0.000000, X, Y) && !ellipse(32399.834000, 25793.442000, 3029.152087, 3029.152087, 0.000000, X, Y) && !ellipse(28845.222000, 29500.746000, 1329.592038, 1329.592038, 0.000000, X, Y) && !ellipse(30247.258800, 27876.926796, 940.864027, 940.864027, 0.000000, X, Y) && !ellipse(28247.508000, 29214.204000, 1251.528036, 1251.528036, 0.000000, X, Y) && !ellipse(31174.920000, 26863.826000, 1354.784039, 1354.784039, 0.000000, X, Y) && !ellipse(29905.260000, 28320.510000, 1881.728054, 1881.728054, 0.000000, X, Y) && !ellipse(28026.124000, 29992.756000, 2659.184077, 2659.184077, 0.000000, X, Y) && !ellipse(33189.872940, 25140.471400, 1514.576044, 1514.576044, 0.000000, X, Y) && !ellipse(29684.490000, 28958.440000, 1843.552053, 1843.552053, 0.000000, X, Y) && !ellipse(29202.427704, 29011.292145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30654.282000, 27651.500000, 2316.584067, 2316.584067, 0.000000, X, Y) && !ellipse(29443.914000, 28178.096000, 1307.344038, 1307.344038, 0.000000, X, Y) && !ellipse(28658.417511, 28491.020569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33478.924000, 24675.266000, 1141.320033, 1141.320033, 0.000000, X, Y) && !ellipse(34137.526000, 23541.118000, 1146.736033, 1146.736033, 0.000000, X, Y) && !ellipse(30170.062000, 26466.044000, 2341.960067, 2341.960067, 0.000000, X, Y) && !ellipse(33598.248199, 25689.850494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31901.891571, 24754.709351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29378.246000, 25491.598000, 1299.480037, 1299.480037, 0.000000, X, Y)
[Fri Dec 30 19:32:22 2011] Writing fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src61.gif
[Fri Dec 30 21:21:00 2011] Mean detx,y = (-4294.05, -4646.78) 
[Fri Dec 30 21:21:02 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 21:21:40 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 21:21:41 2011] Setting source spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Fri Dec 30 21:21:41 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Sat Dec 31 07:06:11 2011] Updating aperture counts using extracted products
[Sat Dec 31 07:06:11 2011] Error reading totcts from fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sat Dec 31 07:06:13 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 07:06:13 2011] Using photon index=1.80, rate=0.00804, arf fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src61.arf
[Sat Dec 31 07:06:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 07:06:13 2011] Updating source flux to 9.5e-14
[Sat Dec 31 07:16:41 2011] Flag b found in src. 61 procflags, skipping spectral fitting
[Sat Dec 31 07:16:41 2011] Flag c found in src. 61 procflags, skipping spectral fitting