[Sat Dec 24 10:46:59 2011] Detection parameters:
  Position = (265.0, 372.8) = 11 51 31.62 -62 16 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 537.7 +/- 32.6
  Background counts = 92.2
  Rate = 0.04 +/- 0.002

[Sat Dec 24 10:47:01 2011] Off-axis axis estimate = 5.91'
[Sat Dec 24 23:36:09 2011] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 23:36:09 2011] Initial guess for spatial extent in simple fitting = 9.38"
[Sat Dec 24 23:36:09 2011] source mask rpix=2.2, npix_max = 28, mask sum = 21, frac = 0.744
[Sat Dec 24 23:36:09 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 9.38"
[Sun Dec 25 09:36:12 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src5.ximg exists
[Sun Dec 25 09:36:12 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Dec 25 09:36:12 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src5 appears to have run properly
[Sun Dec 25 09:36:15 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Dec 25 09:36:15 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Dec 25 09:36:15 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Dec 25 09:37:31 2011] Warning, spatial fit 5 centroid is now closest to src. 20
[Sun Dec 25 09:37:31 2011] Spatial fit model total counts = 2024.990000, observed total counts = 2035.000000
[Sun Dec 25 09:37:31 2011] Offset between fit and detection position for source 6 = 0.835046 pixels
[Sun Dec 25 09:37:31 2011] Warning, changing simple spatial fit ID from 5 to 10
[Sun Dec 25 09:37:31 2011] 2037.272000 total counts/ 1844.810000 bgd. counts: snr = 4.480940
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.835046 pixels
  Position = (265.6, 372.2) = 11 51 31.26 -62 16 46.3
  Extent = 18.0" x 4.1", rotation angle = 67
  Source counts = 192.5 +/- 45.1
  Background counts = 1844.8
  Rate = 0.02 +/- 0.004
[Sun Dec 25 09:37:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 09:37:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 09:37:32 2011] Assessing source extent using major
[Sun Dec 25 09:37:32 2011] Source does appear to be extended
[Sun Dec 25 09:37:32 2011] Computing asymmetry using major and minor axis, asym = 4.37
[Sun Dec 25 09:37:32 2011] Source is asymmetric
[Sun Dec 25 09:37:32 2011] Source is confused with source 20
[Mon Dec 26 05:27:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 26 05:27:18 2011] Initial guess for spatial extent in simple fitting = 11.04"
[Mon Dec 26 05:27:18 2011] source mask rpix=2.5, npix_max = 36, mask sum = 23, frac = 0.623
[Mon Dec 26 05:27:18 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 11.04"
[Mon Dec 26 20:26:20 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src5.ximg exists
[Mon Dec 26 20:26:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src5.csv
[Mon Dec 26 20:26:20 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Dec 26 20:26:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src5.csv
[Mon Dec 26 20:26:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 20:26:22 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Dec 26 20:26:22 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Dec 26 20:26:22 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Dec 26 20:27:35 2011] Warning, spatial fit 5 centroid is now closest to src. 56
[Mon Dec 26 20:27:35 2011] Spatial fit model total counts = 2038.220000, observed total counts = 2035.000000
[Mon Dec 26 20:27:35 2011] Offset between fit and detection position for source 6 = 0.610651 pixels
[Mon Dec 26 20:27:35 2011] Warning, changing simple spatial fit ID from 5 to 10
[Mon Dec 26 20:27:35 2011] 2048.857000 total counts/ 1857.060000 bgd. counts: snr = 4.450705
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.610651 pixels
  Position = (265.2, 372.7) = 11 51 31.49 -62 16 44.2
  Extent = 18.3 (13.9-36.6)" x 4.3 (3.3-5.6)", rotation angle = 66 (59-71) degrees
  Source counts = 191.8 +/- 45.3
  Background counts = 1857.1
  Rate = 0.02 +/- 0.004
[Mon Dec 26 20:27:36 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 20:27:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 20:27:36 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 20:27:36 2011] Source does appear to be extended
[Mon Dec 26 20:27:36 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.48
[Mon Dec 26 20:27:36 2011] Source is asymmetric
[Fri Dec 30 19:32:19 2011] XMMSAS src. selection expression = ellipse(23026.852000, 32375.478000, 1097.910032, 259.056607, 65.676000, X, Y)
[Fri Dec 30 19:32:19 2011] Writing source region out to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src6_src.reg
[Fri Dec 30 19:32:19 2011] Extracting stamp from image fullrun_mos2_xmm0503220101_pi300-10000_cl_sm2.00.img.gz, (202, 310) - (328, 436)
[Fri Dec 30 19:32:19 2011] XMMSAS bgd. selection expression = annulus(23026.852000, 32375.478000, 1829.850053, 3659.700105, X, Y) && !ellipse(25664.698000, 31630.346000, 1102.200032, 1102.200032, 0.000000, X, Y) && !ellipse(25475.259793, 31983.694295, 1438.600041, 824.482572, 64.717659, X, Y) && !ellipse(22699.726000, 32481.335000, 1501.840043, 1501.840043, 0.000000, X, Y) && !ellipse(22845.990000, 32358.300000, 1500.072043, 1500.072043, 0.000000, X, Y) && !ellipse(23919.209800, 30782.334000, 826.696024, 826.696024, 0.000000, X, Y) && !ellipse(24333.345581, 32221.912872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24541.768000, 31931.870000, 1462.032042, 645.864819, 59.995000, X, Y) && !ellipse(23697.726257, 32056.939972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23961.585724, 31415.394623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25390.228000, 29690.658000, 1824.984053, 1824.984053, 0.000000, X, Y) && !ellipse(26484.692600, 32057.642500, 1434.776041, 1434.776041, 0.000000, X, Y) && !ellipse(23358.443080, 30612.710600, 519.044015, 519.044015, 0.000000, X, Y) && !ellipse(27959.665400, 29756.422200, 1316.576038, 1316.576038, 0.000000, X, Y) && !ellipse(25610.410000, 29550.650000, 2019.584058, 1029.624030, 219.589000, X, Y) && !ellipse(24424.829800, 29906.883400, 1016.168029, 1016.168029, 0.000000, X, Y) && !ellipse(23484.171631, 32585.158051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26252.870000, 30874.532000, 1067.240031, 1067.240031, 0.000000, X, Y) && !ellipse(21853.062347, 32437.586212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25182.065521, 30482.552734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28026.124000, 29992.756000, 2659.184077, 2659.184077, 0.000000, X, Y) && !ellipse(25017.421600, 30094.900000, 1336.944038, 1336.944038, 0.000000, X, Y) && !ellipse(21618.744000, 32147.871400, 1550.880045, 1550.880045, 0.000000, X, Y) && !ellipse(22439.199890, 31178.767792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22564.384000, 29533.282000, 1361.272039, 1361.272039, 0.000000, X, Y) && !ellipse(21541.748000, 33259.912000, 725.025621, 725.025621, 0.000000, X, Y) && !ellipse(26070.576000, 28849.442000, 532.338415, 532.338415, 0.000000, X, Y) && !ellipse(22613.853027, 30824.387756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23550.143799, 33259.307159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21894.050690, 31279.499603, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 30 19:32:19 2011] Writing fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src6.gif
[Fri Dec 30 19:53:58 2011] Mean detx,y = (1061.16, 5380.85) 
[Fri Dec 30 19:54:02 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 19:55:09 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 19:55:09 2011] Setting source spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Dec 30 19:55:09 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Dec 31 07:06:08 2011] Updating aperture counts using extracted products
[Sat Dec 31 07:06:08 2011] Error reading totcts from fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Dec 31 07:06:11 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 07:06:11 2011] Using photon index=1.80, rate=0.0151, arf fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src6.arf
[Sat Dec 31 07:06:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 07:06:11 2011] Updating source flux to 2.4e-13
[Sat Dec 31 07:16:40 2011] Flag c found in src. 6 procflags, skipping spectral fitting