[Sat Dec 24 10:47:01 2011] Detection parameters:
  Position = (252.2, 360.1) = 11 51 39.62 -62 17 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.8 +/- 19.6
  Background counts = 94.2
  Rate = 0.007 +/- 0.001

[Sat Dec 24 10:47:01 2011] Off-axis axis estimate = 5.59'
[Sat Dec 24 23:36:09 2011] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 23:36:09 2011] Initial guess for spatial extent in simple fitting = 9.22"
[Sat Dec 24 23:36:09 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.093
[Sat Dec 24 23:36:09 2011] Giving source the simple spatial ID 51 for pass 0, mean size = 9.22"
[Sun Dec 25 09:36:14 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src51.ximg exists
[Sun Dec 25 09:36:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src51.csv
[Sun Dec 25 09:36:14 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src51_1.ximg exists
[Sun Dec 25 09:36:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src51.csv
[Sun Dec 25 09:36:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 09:36:19 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Sun Dec 25 09:36:19 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Sun Dec 25 09:36:19 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Sun Dec 25 09:37:32 2011] Warning, spatial fit 51 centroid is now closest to src. 41
[Sun Dec 25 09:37:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 09:37:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 09:37:32 2011] Assessing source extent using major
[Sun Dec 25 09:37:32 2011] Source does appear to be extended
[Sun Dec 25 09:37:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 09:37:32 2011] Source is confused with source 41
[Mon Dec 26 05:27:19 2011] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 05:27:19 2011] Initial guess for spatial extent in simple fitting = 9.22"
[Mon Dec 26 05:27:19 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.093
[Mon Dec 26 05:27:19 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 9.22"
[Mon Dec 26 20:26:22 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src49.ximg exists
[Mon Dec 26 20:26:22 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src49_1.ximg exists
[Mon Dec 26 20:26:22 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src49 appears to have run properly
[Mon Dec 26 20:26:24 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Mon Dec 26 20:26:24 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Mon Dec 26 20:26:24 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Mon Dec 26 20:27:36 2011] Source 57 is offset by 7.319847 and 5.710478 pixels which is larger than
2 X fitted extent = 5.671862 x 5.671862, not incorporating fit results
[Mon Dec 26 20:27:36 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 20:27:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 20:27:36 2011] Assessing source extent using major
[Mon Dec 26 20:27:36 2011] Source does appear to be extended
[Mon Dec 26 20:27:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 19:32:22 2011] XMMSAS src. selection expression = ellipse(21894.050690, 31279.499603, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 30 19:32:22 2011] Writing source region out to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src57_src.reg
[Fri Dec 30 19:32:22 2011] Extracting stamp from image fullrun_mos2_xmm0503220101_pi300-10000_cl_sm2.00.img.gz, (215, 323) - (290, 398)
[Fri Dec 30 19:32:22 2011] XMMSAS bgd. selection expression = annulus(21894.050690, 31279.499603, 1087.500000, 2175.000000, X, Y) && !ellipse(25475.259793, 31983.694295, 1438.600041, 824.482572, 64.717659, X, Y) && !ellipse(22699.726000, 32481.335000, 1501.840043, 1501.840043, 0.000000, X, Y) && !ellipse(22845.990000, 32358.300000, 1500.072043, 1500.072043, 0.000000, X, Y) && !ellipse(23026.852000, 32375.478000, 1463.880042, 345.408810, 65.676000, X, Y) && !ellipse(23919.209800, 30782.334000, 826.696024, 826.696024, 0.000000, X, Y) && !ellipse(24333.345581, 32221.912872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24541.768000, 31931.870000, 1462.032042, 645.864819, 59.995000, X, Y) && !ellipse(23697.726257, 32056.939972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23961.585724, 31415.394623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25390.228000, 29690.658000, 1824.984053, 1824.984053, 0.000000, X, Y) && !ellipse(23358.443080, 30612.710600, 519.044015, 519.044015, 0.000000, X, Y) && !ellipse(25610.410000, 29550.650000, 2019.584058, 1029.624030, 219.589000, X, Y) && !ellipse(24424.829800, 29906.883400, 1016.168029, 1016.168029, 0.000000, X, Y) && !ellipse(23484.171631, 32585.158051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21853.062347, 32437.586212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25017.421600, 30094.900000, 1336.944038, 1336.944038, 0.000000, X, Y) && !ellipse(21618.744000, 32147.871400, 1550.880045, 1550.880045, 0.000000, X, Y) && !ellipse(22439.199890, 31178.767792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22564.384000, 29533.282000, 1361.272039, 1361.272039, 0.000000, X, Y) && !ellipse(21541.748000, 33259.912000, 725.025621, 725.025621, 0.000000, X, Y) && !ellipse(22613.853027, 30824.387756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23550.143799, 33259.307159, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 30 19:32:22 2011] Writing fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src57.gif
[Fri Dec 30 21:22:28 2011] Mean detx,y = (2362.48, 4999.48) 
[Fri Dec 30 21:22:31 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 21:22:53 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 21:22:53 2011] Setting source spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Fri Dec 30 21:22:53 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Sat Dec 31 05:50:36 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 31 05:50:36 2011] rmf not generated due to insufficient counts
[Sat Dec 31 07:06:11 2011] Updating aperture counts using extracted products
[Sat Dec 31 07:06:11 2011] Error reading totcts from fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Sat Dec 31 07:06:13 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 07:06:13 2011] Using photon index=1.80, rate=0.0072, arf fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src57.arf
[Sat Dec 31 07:06:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 07:06:13 2011] Updating source flux to 1e-13
[Sat Dec 31 07:16:41 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting