[Sat Dec 24 10:46:58 2011] Detection parameters:
  Position = (307.2, 368.1) = 11 51 5.30 -62 17 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 416.7 +/- 31.6
  Background counts = 127.2
  Rate = 0.03 +/- 0.002

[Sat Dec 24 10:47:01 2011] Off-axis axis estimate = 5.09'
[Sat Dec 24 23:36:09 2011] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 23:36:09 2011] Initial guess for spatial extent in simple fitting = 8.97"
[Sat Dec 24 23:36:09 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.142
[Sat Dec 24 23:36:09 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 8.97"
[Sun Dec 25 09:36:12 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src15.ximg exists
[Sun Dec 25 09:36:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src15.csv
[Sun Dec 25 09:36:12 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Dec 25 09:36:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src15.csv
[Sun Dec 25 09:36:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 09:36:16 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Dec 25 09:36:16 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Dec 25 09:36:16 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Dec 25 09:37:31 2011] Spatial fit model total counts = 1997.830000, observed total counts = 1993.000000
[Sun Dec 25 09:37:31 2011] Offset between fit and detection position for source 5 = 2.466313 pixels
[Sun Dec 25 09:37:31 2011] 1823.958000 total counts/ 1553.530000 bgd. counts: snr = 6.861070
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.466313 pixels
  Position = (305.0, 369.0) = 11 51 6.71 -62 17 0.2
  Extent = 17.9 (17.9-17.9)", rotation angle = 0
  Source counts = 270.4 +/- 42.7
  Background counts = 1553.5
  Rate = 0.02 +/- 0.003
[Sun Dec 25 09:37:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 09:37:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 09:37:32 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 09:37:32 2011] Source does appear to be extended
[Sun Dec 25 09:37:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 09:37:32 2011] Source is confused with source 1
[Mon Dec 26 05:27:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 26 05:27:18 2011] Initial guess for spatial extent in simple fitting = 17.93"
[Mon Dec 26 05:27:18 2011] source mask rpix=4.1, npix_max = 85, mask sum = 100, frac = 1.170
[Mon Dec 26 05:27:18 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 17.93"
[Mon Dec 26 20:26:21 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src15.ximg exists
[Mon Dec 26 20:26:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src15.csv
[Mon Dec 26 20:26:21 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon Dec 26 20:26:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src15.csv
[Mon Dec 26 20:26:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 20:26:22 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon Dec 26 20:26:22 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Dec 26 20:26:22 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Dec 26 20:27:36 2011] Warning, spatial fit 15 centroid is now closest to src. 3
[Mon Dec 26 20:27:36 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 20:27:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 20:27:36 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 20:27:36 2011] Source does appear to be extended
[Mon Dec 26 20:27:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 19:32:20 2011] XMMSAS src. selection expression = ellipse(26484.692600, 32057.642500, 1076.082031, 1076.082031, 0.000000, X, Y)
[Fri Dec 30 19:32:20 2011] Writing source region out to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src5_src.reg
[Fri Dec 30 19:32:20 2011] Extracting stamp from image fullrun_mos2_xmm0503220101_pi300-10000_cl_sm2.00.img.gz, (243, 307) - (367, 431)
[Fri Dec 30 19:32:20 2011] XMMSAS bgd. selection expression = annulus(26484.692600, 32057.642500, 1793.470052, 3586.940103, X, Y) && !ellipse(25664.698000, 31630.346000, 1102.200032, 1102.200032, 0.000000, X, Y) && !ellipse(25475.259793, 31983.694295, 1438.600041, 824.482572, 64.717659, X, Y) && !ellipse(22699.726000, 32481.335000, 1501.840043, 1501.840043, 0.000000, X, Y) && !ellipse(22845.990000, 32358.300000, 1500.072043, 1500.072043, 0.000000, X, Y) && !ellipse(23026.852000, 32375.478000, 1463.880042, 345.408810, 65.676000, X, Y) && !ellipse(23919.209800, 30782.334000, 826.696024, 826.696024, 0.000000, X, Y) && !ellipse(24333.345581, 32221.912872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24541.768000, 31931.870000, 1462.032042, 645.864819, 59.995000, X, Y) && !ellipse(23697.726257, 32056.939972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23961.585724, 31415.394623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25390.228000, 29690.658000, 1824.984053, 1824.984053, 0.000000, X, Y) && !ellipse(31711.718000, 26318.446000, 2874.528083, 2018.472058, 37.699900, X, Y) && !ellipse(23358.443080, 30612.710600, 519.044015, 519.044015, 0.000000, X, Y) && !ellipse(27959.665400, 29756.422200, 1316.576038, 1316.576038, 0.000000, X, Y) && !ellipse(25610.410000, 29550.650000, 2019.584058, 1029.624030, 219.589000, X, Y) && !ellipse(24424.829800, 29906.883400, 1016.168029, 1016.168029, 0.000000, X, Y) && !ellipse(23484.171631, 32585.158051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32399.834000, 25793.442000, 3029.152087, 3029.152087, 0.000000, X, Y) && !ellipse(26252.870000, 30874.532000, 1067.240031, 1067.240031, 0.000000, X, Y) && !ellipse(25182.065521, 30482.552734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28845.222000, 29500.746000, 1329.592038, 1329.592038, 0.000000, X, Y) && !ellipse(30247.258800, 27876.926796, 940.864027, 940.864027, 0.000000, X, Y) && !ellipse(28247.508000, 29214.204000, 1251.528036, 1251.528036, 0.000000, X, Y) && !ellipse(29905.260000, 28320.510000, 1881.728054, 1881.728054, 0.000000, X, Y) && !ellipse(28026.124000, 29992.756000, 2659.184077, 2659.184077, 0.000000, X, Y) && !ellipse(25017.421600, 30094.900000, 1336.944038, 1336.944038, 0.000000, X, Y) && !ellipse(29684.490000, 28958.440000, 1843.552053, 1843.552053, 0.000000, X, Y) && !ellipse(29202.427704, 29011.292145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30654.282000, 27651.500000, 2316.584067, 2316.584067, 0.000000, X, Y) && !ellipse(21618.744000, 32147.871400, 1550.880045, 1550.880045, 0.000000, X, Y) && !ellipse(22439.199890, 31178.767792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29443.914000, 28178.096000, 1307.344038, 1307.344038, 0.000000, X, Y) && !ellipse(22564.384000, 29533.282000, 1361.272039, 1361.272039, 0.000000, X, Y) && !ellipse(26070.576000, 28849.442000, 532.338415, 532.338415, 0.000000, X, Y) && !ellipse(28658.417511, 28491.020569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22613.853027, 30824.387756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23550.143799, 33259.307159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30170.062000, 26466.044000, 2341.960067, 2341.960067, 0.000000, X, Y)
[Fri Dec 30 19:32:20 2011] Writing fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src5.gif
[Fri Dec 30 20:20:01 2011] Mean detx,y = (-1656.31, 3675.66) 
[Fri Dec 30 20:20:04 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 20:21:03 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 20:21:04 2011] Setting source spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Dec 30 20:21:04 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Dec 31 07:06:08 2011] Updating aperture counts using extracted products
[Sat Dec 31 07:06:09 2011] Error reading totcts from fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Dec 31 07:06:12 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 07:06:12 2011] Using photon index=1.80, rate=0.0212, arf fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src5.arf
[Sat Dec 31 07:06:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 07:06:12 2011] Updating source flux to 2.5e-13
[Sat Dec 31 07:16:41 2011] Flag c found in src. 5 procflags, skipping spectral fitting