[Sat Dec 24 10:47:00 2011] Detection parameters:
  Position = (139.9, 383.9) = 11 52 49.59 -62 15 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.5 +/- 15.4
  Background counts = 51.6
  Rate = 0.003 +/- 0.0008

[Sat Dec 24 10:47:01 2011] Off-axis axis estimate = 13.06'
[Sat Dec 24 23:36:09 2011] Using EEF radius (= 12.96 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 23:36:09 2011] Initial guess for spatial extent in simple fitting = 12.96"
[Sat Dec 24 23:36:09 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.012
[Sat Dec 24 23:36:09 2011] Giving source the simple spatial ID 61 for pass 0, mean size = 12.96"
[Sun Dec 25 09:36:14 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src61.ximg exists
[Sun Dec 25 09:36:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src61.csv
[Sun Dec 25 09:36:14 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src61_1.ximg exists
[Sun Dec 25 09:36:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src61.csv
[Sun Dec 25 09:36:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 09:36:19 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sun Dec 25 09:36:19 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sun Dec 25 09:36:19 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Sun Dec 25 09:37:32 2011] Source 37 is offset by -1.476632 and 3.223702 pixels which is larger than
2 X fitted extent = 1.544386 x 1.544386, not incorporating fit results
[Sun Dec 25 09:37:32 2011] Warning, spatial fit 61 centroid is now closest to src. 55
[Sun Dec 25 09:37:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 09:37:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 09:37:32 2011] Assessing source extent using major
[Sun Dec 25 09:37:32 2011] Source does appear to be extended
[Sun Dec 25 09:37:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 09:37:32 2011] Source is confused with source 55
[Mon Dec 26 05:27:19 2011] Using EEF radius (= 12.96 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 05:27:19 2011] Initial guess for spatial extent in simple fitting = 12.96"
[Mon Dec 26 05:27:19 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.012
[Mon Dec 26 05:27:19 2011] Giving source the simple spatial ID 58 for pass 1, mean size = 12.96"
[Mon Dec 26 20:26:22 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src58.ximg exists
[Mon Dec 26 20:26:22 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src58_1.ximg exists
[Mon Dec 26 20:26:22 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src58 appears to have run properly
[Mon Dec 26 20:26:24 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Mon Dec 26 20:26:24 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Mon Dec 26 20:26:24 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Mon Dec 26 20:27:36 2011] Warning, spatial fit 58 centroid is now closest to src. 39
[Mon Dec 26 20:27:36 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 20:27:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 20:27:36 2011] Assessing source extent using major
[Mon Dec 26 20:27:36 2011] Source does appear to be extended
[Mon Dec 26 20:27:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 19:32:23 2011] XMMSAS src. selection expression = ellipse(12120.925018, 33348.070099, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 30 19:32:23 2011] Writing source region out to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src37_src.reg
[Fri Dec 30 19:32:23 2011] Extracting stamp from image fullrun_mos2_xmm0503220101_pi300-10000_cl_sm2.00.img.gz, (102, 346) - (177, 421)
[Fri Dec 30 19:32:23 2011] XMMSAS bgd. selection expression = annulus(12120.925018, 33348.070099, 1087.500000, 2175.000000, X, Y) && !ellipse(10867.144000, 33136.404000, 4146.416119, 1296.808037, 116.348000, X, Y) && !ellipse(11626.780000, 33863.400000, 2073.208060, 2073.208060, 0.000000, X, Y) && !ellipse(12782.495676, 32237.490000, 1958.808056, 1958.808056, 0.000000, X, Y)
[Fri Dec 30 19:32:23 2011] Writing fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src37.gif
[Fri Dec 30 21:34:18 2011] Mean detx,y = (10342.51, 11082.76) 
[Fri Dec 30 21:34:21 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 21:34:37 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 21:34:38 2011] Setting source spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Fri Dec 30 21:34:38 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sat Dec 31 06:58:11 2011] Not generating rmf since there are only 65 counts
[Sat Dec 31 06:58:11 2011] rmf not generated due to insufficient counts
[Sat Dec 31 07:06:11 2011] Updating aperture counts using extracted products
[Sat Dec 31 07:06:11 2011] Error reading totcts from fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat Dec 31 07:06:13 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 07:06:13 2011] Using photon index=1.80, rate=0.00334, arf fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src37.arf
[Sat Dec 31 07:06:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 07:06:14 2011] Updating source flux to 1.1e-13
[Sat Dec 31 07:16:41 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting