[Sat Dec 24 10:47:00 2011] Detection parameters:
  Position = (123.8, 378.0) = 11 52 59.65 -62 16 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.2 +/- 16.4
  Background counts = 42.7
  Rate = 0.005 +/- 0.0008

[Sat Dec 24 10:47:01 2011] Off-axis axis estimate = 13.91'
[Sat Dec 24 23:36:09 2011] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 23:36:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 24 23:36:09 2011] Initial guess for spatial extent in simple fitting = 13.39"
[Sat Dec 24 23:36:09 2011] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.094
[Sat Dec 24 23:36:09 2011] Giving source the simple spatial ID 56 for pass 0, mean size = 13.39"
[Sun Dec 25 09:36:14 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src56.ximg exists
[Sun Dec 25 09:36:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src56.csv
[Sun Dec 25 09:36:14 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src56_1.ximg exists
[Sun Dec 25 09:36:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src56.csv
[Sun Dec 25 09:36:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 09:36:19 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Sun Dec 25 09:36:19 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Sun Dec 25 09:36:19 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Sun Dec 25 09:37:32 2011] Warning: source 56 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 17.983594 pixels away
[Sun Dec 25 09:37:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 09:37:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 09:37:32 2011] Assessing source extent using major
[Sun Dec 25 09:37:32 2011] Source does appear to be extended
[Sun Dec 25 09:37:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 09:37:32 2011] Source is confused with source 55
[Mon Dec 26 05:27:19 2011] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 05:27:19 2011] Initial guess for spatial extent in simple fitting = 13.39"
[Mon Dec 26 05:27:19 2011] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.094
[Mon Dec 26 05:27:19 2011] Giving source the simple spatial ID 53 for pass 1, mean size = 13.39"
[Mon Dec 26 20:26:22 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src53.ximg exists
[Mon Dec 26 20:26:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src53.csv
[Mon Dec 26 20:26:22 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src53_1.ximg exists
[Mon Dec 26 20:26:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src53.csv
[Mon Dec 26 20:26:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 20:26:24 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Mon Dec 26 20:26:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Mon Dec 26 20:26:24 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Mon Dec 26 20:26:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Mon Dec 26 20:26:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 20:27:36 2011] Spatial fit model total counts = 320.653000, observed total counts = 375.000000
[Mon Dec 26 20:27:36 2011] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Dec 26 20:27:36 2011] Spatial fit model total counts = 970.756000, observed total counts = 995.000000
[Mon Dec 26 20:27:36 2011] Offset between fit and detection position for source 36 = 3.867274 pixels
[Mon Dec 26 20:27:36 2011] Warning, changing simple spatial fit ID from 53 to 56
[Mon Dec 26 20:27:36 2011] 988.145000 total counts/ 730.243000 bgd. counts: snr = 9.543793
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 3.867274 pixels
  Position = (125.5, 381.4) = 11 52 58.58 -62 16 3.6
  Extent = 51.8 (48.5-103.7)" x 16.2 (13.0-20.2)", rotation angle = 116 (111-121) degrees
  Source counts = 257.9 +/- 31.4
  Background counts = 730.2
  Rate = 0.02 +/- 0.002
[Mon Dec 26 20:27:36 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 20:27:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 20:27:36 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 20:27:36 2011] Source does appear to be extended
[Mon Dec 26 20:27:36 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.40
[Mon Dec 26 20:27:36 2011] Source is asymmetric
[Fri Dec 30 19:32:23 2011] XMMSAS src. selection expression = ellipse(10867.144000, 33136.404000, 3109.812089, 972.606028, 116.348000, X, Y)
[Fri Dec 30 19:32:23 2011] Writing source region out to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src36_src.reg
[Fri Dec 30 19:32:23 2011] Extracting stamp from image fullrun_mos2_xmm0503220101_pi300-10000_cl_sm2.00.img.gz, (0, 203) - (304, 560)
[Fri Dec 30 19:32:23 2011] XMMSAS bgd. selection expression = annulus(10867.144000, 33136.404000, 5183.020149, 10366.040298, X, Y) && !ellipse(22699.726000, 32481.335000, 1501.840043, 1501.840043, 0.000000, X, Y) && !ellipse(21853.062347, 32437.586212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21618.744000, 32147.871400, 1550.880045, 1550.880045, 0.000000, X, Y) && !ellipse(22564.384000, 29533.282000, 1361.272039, 1361.272039, 0.000000, X, Y) && !ellipse(21541.748000, 33259.912000, 725.025621, 725.025621, 0.000000, X, Y) && !ellipse(21894.050690, 31279.499603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11626.780000, 33863.400000, 2073.208060, 2073.208060, 0.000000, X, Y) && !ellipse(12120.925018, 33348.070099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12782.495676, 32237.490000, 1958.808056, 1958.808056, 0.000000, X, Y)
[Fri Dec 30 19:32:23 2011] Writing fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src36.gif
[Fri Dec 30 21:26:02 2011] Mean detx,y = (11497.88, 10646.34) 
[Fri Dec 30 21:26:05 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 21:30:31 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 21:30:32 2011] Setting source spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Fri Dec 30 21:30:32 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sat Dec 31 07:06:11 2011] Updating aperture counts using extracted products
[Sat Dec 31 07:06:11 2011] Error reading totcts from fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat Dec 31 07:06:13 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 07:06:13 2011] Using photon index=1.80, rate=0.0202, arf fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src36.arf
[Sat Dec 31 07:06:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 07:06:13 2011] Updating source flux to 6.6e-13
[Sat Dec 31 07:16:41 2011] Flag p found in src. 36 procflags, skipping spectral fitting
[Sat Dec 31 07:16:41 2011] Flag c found in src. 36 procflags, skipping spectral fitting