[Sat Dec 24 10:46:59 2011] Detection parameters:
  Position = (347.4, 320.0) = 11 50 40.18 -62 20 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 345.9 +/- 29.1
  Background counts = 135.2
  Rate = 0.02 +/- 0.002

[Sat Dec 24 10:47:01 2011] Off-axis axis estimate = 3.88'
[Sat Dec 24 23:36:09 2011] Using EEF radius (= 8.37 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 23:36:09 2011] Initial guess for spatial extent in simple fitting = 8.37"
[Sat Dec 24 23:36:09 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.851
[Sat Dec 24 23:36:09 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 8.37"
[Sun Dec 25 09:36:12 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src28.ximg exists
[Sun Dec 25 09:36:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src28.csv
[Sun Dec 25 09:36:12 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Dec 25 09:36:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src28.csv
[Sun Dec 25 09:36:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 09:36:17 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Dec 25 09:36:17 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Dec 25 09:36:17 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sun Dec 25 09:37:31 2011] Source 29 is offset by -2.607703 and 2.080176 pixels which is larger than
2 X fitted extent = 0.994786 x 0.994786, not incorporating fit results
[Sun Dec 25 09:37:32 2011] Spatial fit model total counts = 1938.480000, observed total counts = 1935.000000
[Sun Dec 25 09:37:32 2011] Offset between fit and detection position for source 29 = 1.232526 pixels
[Sun Dec 25 09:37:32 2011] 1874.748000 total counts/ 1729.590000 bgd. counts: snr = 3.490353
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 1.232526 pixels
  Position = (348.2, 321.0) = 11 50 39.68 -62 20 29.0
  Extent = 11.8 (3.5-16.7)", rotation angle = 0
  Source counts = 145.2 +/- 43.3
  Background counts = 1729.6
  Rate = 0.01 +/- 0.003
[Sun Dec 25 09:37:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 09:37:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 09:37:32 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 09:37:32 2011] Source does appear to be extended
[Sun Dec 25 09:37:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 09:37:32 2011] Source is confused with source 28
[Sun Dec 25 09:37:32 2011] Source is confused with source 50
[Sun Dec 25 09:37:32 2011] Source is confused with source 48
[Mon Dec 26 05:27:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 26 05:27:18 2011] Initial guess for spatial extent in simple fitting = 11.76"
[Mon Dec 26 05:27:18 2011] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.877
[Mon Dec 26 05:27:18 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 11.76"
[Mon Dec 26 20:26:21 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src27.ximg exists
[Mon Dec 26 20:26:21 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src27_1.ximg exists
[Mon Dec 26 20:26:21 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src27 appears to have run properly
[Mon Dec 26 20:26:23 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Mon Dec 26 20:26:23 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Mon Dec 26 20:26:23 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Mon Dec 26 20:27:36 2011] Warning, spatial fit 27 centroid is now closest to src. 28
[Mon Dec 26 20:27:36 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 20:27:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 20:27:36 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 20:27:36 2011] Source does appear to be extended
[Mon Dec 26 20:27:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 19:32:21 2011] XMMSAS src. selection expression = ellipse(30247.258800, 27876.926796, 705.648020, 705.648020, 0.000000, X, Y)
[Fri Dec 30 19:32:21 2011] Writing source region out to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src29_src.reg
[Fri Dec 30 19:32:21 2011] Extracting stamp from image fullrun_mos2_xmm0503220101_pi300-10000_cl_sm2.00.img.gz, (308, 280) - (389, 362)
[Fri Dec 30 19:32:21 2011] XMMSAS bgd. selection expression = annulus(30247.258800, 27876.926796, 1176.080034, 2352.160068, X, Y) && !ellipse(31711.718000, 26318.446000, 2874.528083, 2018.472058, 37.699900, X, Y) && !ellipse(31217.430000, 26723.900000, 1410.488041, 1410.488041, 0.000000, X, Y) && !ellipse(27959.665400, 29756.422200, 1316.576038, 1316.576038, 0.000000, X, Y) && !ellipse(32399.834000, 25793.442000, 3029.152087, 3029.152087, 0.000000, X, Y) && !ellipse(28845.222000, 29500.746000, 1329.592038, 1329.592038, 0.000000, X, Y) && !ellipse(28247.508000, 29214.204000, 1251.528036, 1251.528036, 0.000000, X, Y) && !ellipse(31174.920000, 26863.826000, 1354.784039, 1354.784039, 0.000000, X, Y) && !ellipse(29905.260000, 28320.510000, 1881.728054, 1881.728054, 0.000000, X, Y) && !ellipse(28026.124000, 29992.756000, 2659.184077, 2659.184077, 0.000000, X, Y) && !ellipse(33189.872940, 25140.471400, 1514.576044, 1514.576044, 0.000000, X, Y) && !ellipse(29684.490000, 28958.440000, 1843.552053, 1843.552053, 0.000000, X, Y) && !ellipse(29202.427704, 29011.292145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30654.282000, 27651.500000, 2316.584067, 2316.584067, 0.000000, X, Y) && !ellipse(29443.914000, 28178.096000, 1307.344038, 1307.344038, 0.000000, X, Y) && !ellipse(28658.417511, 28491.020569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33478.924000, 24675.266000, 1141.320033, 1141.320033, 0.000000, X, Y) && !ellipse(32153.914000, 25433.892000, 1422.096041, 1422.096041, 0.000000, X, Y) && !ellipse(30170.062000, 26466.044000, 2341.960067, 2341.960067, 0.000000, X, Y) && !ellipse(31901.891571, 24754.709351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29378.246000, 25491.598000, 1299.480037, 1299.480037, 0.000000, X, Y)
[Fri Dec 30 19:32:21 2011] Writing fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src29.gif
[Fri Dec 30 20:46:32 2011] Mean detx,y = (-3521.34, -1764.21) 
[Fri Dec 30 20:46:35 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 20:46:58 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 20:46:58 2011] Setting source spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Dec 30 20:46:58 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Dec 31 07:06:09 2011] Updating aperture counts using extracted products
[Sat Dec 31 07:06:09 2011] Error reading totcts from fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Dec 31 07:06:12 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 07:06:12 2011] Using photon index=1.80, rate=0.0114, arf fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src29.arf
[Sat Dec 31 07:06:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 07:06:12 2011] Updating source flux to 1.3e-13
[Sat Dec 31 07:16:41 2011] Flag b found in src. 29 procflags, skipping spectral fitting
[Sat Dec 31 07:16:41 2011] Flag c found in src. 29 procflags, skipping spectral fitting