[Sat Dec 24 10:46:59 2011] Detection parameters:
  Position = (314.9, 343.1) = 11 51 0.49 -62 18 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 348.8 +/- 31.1
  Background counts = 146.7
  Rate = 0.02 +/- 0.002

[Sat Dec 24 10:47:01 2011] Off-axis axis estimate = 3.45'
[Sat Dec 24 23:36:09 2011] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 23:36:09 2011] Initial guess for spatial extent in simple fitting = 8.15"
[Sat Dec 24 23:36:09 2011] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.709
[Sat Dec 24 23:36:09 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 8.15"
[Sun Dec 25 09:36:12 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src29.ximg exists
[Sun Dec 25 09:36:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src29.csv
[Sun Dec 25 09:36:12 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun Dec 25 09:36:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src29.csv
[Sun Dec 25 09:36:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 09:36:17 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun Dec 25 09:36:17 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun Dec 25 09:36:17 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sun Dec 25 09:37:32 2011] Spatial fit model total counts = 2174.820000, observed total counts = 2176.000000
[Sun Dec 25 09:37:32 2011] Offset between fit and detection position for source 27 = 4.737669 pixels
[Sun Dec 25 09:37:32 2011] 2189.475000 total counts/ 1882.190000 bgd. counts: snr = 7.082876
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 4.737669 pixels
  Position = (319.0, 340.7) = 11 50 57.95 -62 19 3.5
  Extent = 16.3 (16.3-32.6)", rotation angle = 0
  Source counts = 307.3 +/- 46.8
  Background counts = 1882.2
  Rate = 0.02 +/- 0.004
[Sun Dec 25 09:37:32 2011] Spatial fit model total counts = 2001.720000, observed total counts = 1999.000000
[Sun Dec 25 09:37:32 2011] Offset between fit and detection position for source 27 = 1.998707 pixels
[Sun Dec 25 09:37:32 2011] Warning, changing simple spatial fit ID from 29 to 34
[Sun Dec 25 09:37:32 2011] 2034.060000 total counts/ 1838.740000 bgd. counts: snr = 4.554981
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 1.998707 pixels
  Position = (321.0, 340.9) = 11 50 56.71 -62 19 2.4
  Extent = 16.3 (16.3-32.7)", rotation angle = 0
  Source counts = 195.3 +/- 45.1
  Background counts = 1838.7
  Rate = 0.02 +/- 0.004
[Sun Dec 25 09:37:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 09:37:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 09:37:32 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 09:37:32 2011] Source does appear to be extended
[Sun Dec 25 09:37:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 09:37:32 2011] Source is confused with source 14
[Mon Dec 26 05:27:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 26 05:27:18 2011] Initial guess for spatial extent in simple fitting = 16.33"
[Mon Dec 26 05:27:18 2011] source mask rpix=3.8, npix_max = 72, mask sum = 64, frac = 0.884
[Mon Dec 26 05:27:18 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 16.33"
[Mon Dec 26 20:26:21 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src28.ximg exists
[Mon Dec 26 20:26:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src28.csv
[Mon Dec 26 20:26:21 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src28_1.ximg exists
[Mon Dec 26 20:26:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src28.csv
[Mon Dec 26 20:26:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 20:26:23 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Mon Dec 26 20:26:23 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Mon Dec 26 20:26:23 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Mon Dec 26 20:27:36 2011] Warning, spatial fit 28 centroid is now closest to src. 22
[Mon Dec 26 20:27:36 2011] Spatial fit model total counts = 1688.210000, observed total counts = 1686.000000
[Mon Dec 26 20:27:36 2011] Offset between fit and detection position for source 27 = 6.242551 pixels
[Mon Dec 26 20:27:36 2011] Warning, changing simple spatial fit ID from 28 to 43
[Mon Dec 26 20:27:36 2011] 1736.616000 total counts/ 1622.880000 bgd. counts: snr = 2.823285
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 6.242551 pixels
  Position = (325.2, 336.4) = 11 50 54.05 -62 19 22.3
  Extent = 15.6 (14.9-16.0)", rotation angle = 0
  Source counts = 113.7 +/- 41.7
  Background counts = 1622.9
  Rate = 0.009 +/- 0.003
[Mon Dec 26 20:27:36 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 20:27:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 20:27:36 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 20:27:36 2011] Source does appear to be extended
[Mon Dec 26 20:27:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 19:32:21 2011] XMMSAS src. selection expression = ellipse(28247.508000, 29214.204000, 938.646027, 938.646027, 0.000000, X, Y)
[Fri Dec 30 19:32:21 2011] Writing source region out to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src27_src.reg
[Fri Dec 30 19:32:21 2011] Extracting stamp from image fullrun_mos2_xmm0503220101_pi300-10000_cl_sm2.00.img.gz, (271, 282) - (379, 390)
[Fri Dec 30 19:32:21 2011] XMMSAS bgd. selection expression = annulus(28247.508000, 29214.204000, 1564.410045, 3128.820090, X, Y) && !ellipse(25664.698000, 31630.346000, 1102.200032, 1102.200032, 0.000000, X, Y) && !ellipse(25475.259793, 31983.694295, 1438.600041, 824.482572, 64.717659, X, Y) && !ellipse(24333.345581, 32221.912872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24541.768000, 31931.870000, 1462.032042, 645.864819, 59.995000, X, Y) && !ellipse(25390.228000, 29690.658000, 1824.984053, 1824.984053, 0.000000, X, Y) && !ellipse(31711.718000, 26318.446000, 2874.528083, 2018.472058, 37.699900, X, Y) && !ellipse(26484.692600, 32057.642500, 1434.776041, 1434.776041, 0.000000, X, Y) && !ellipse(31217.430000, 26723.900000, 1410.488041, 1410.488041, 0.000000, X, Y) && !ellipse(27959.665400, 29756.422200, 1316.576038, 1316.576038, 0.000000, X, Y) && !ellipse(25610.410000, 29550.650000, 2019.584058, 1029.624030, 219.589000, X, Y) && !ellipse(24424.829800, 29906.883400, 1016.168029, 1016.168029, 0.000000, X, Y) && !ellipse(32399.834000, 25793.442000, 3029.152087, 3029.152087, 0.000000, X, Y) && !ellipse(26252.870000, 30874.532000, 1067.240031, 1067.240031, 0.000000, X, Y) && !ellipse(25182.065521, 30482.552734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28845.222000, 29500.746000, 1329.592038, 1329.592038, 0.000000, X, Y) && !ellipse(30247.258800, 27876.926796, 940.864027, 940.864027, 0.000000, X, Y) && !ellipse(31174.920000, 26863.826000, 1354.784039, 1354.784039, 0.000000, X, Y) && !ellipse(29905.260000, 28320.510000, 1881.728054, 1881.728054, 0.000000, X, Y) && !ellipse(28026.124000, 29992.756000, 2659.184077, 2659.184077, 0.000000, X, Y) && !ellipse(25017.421600, 30094.900000, 1336.944038, 1336.944038, 0.000000, X, Y) && !ellipse(29684.490000, 28958.440000, 1843.552053, 1843.552053, 0.000000, X, Y) && !ellipse(29202.427704, 29011.292145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30654.282000, 27651.500000, 2316.584067, 2316.584067, 0.000000, X, Y) && !ellipse(29443.914000, 28178.096000, 1307.344038, 1307.344038, 0.000000, X, Y) && !ellipse(26070.576000, 28849.442000, 532.338415, 532.338415, 0.000000, X, Y) && !ellipse(28658.417511, 28491.020569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32153.914000, 25433.892000, 1422.096041, 1422.096041, 0.000000, X, Y) && !ellipse(30170.062000, 26466.044000, 2341.960067, 2341.960067, 0.000000, X, Y) && !ellipse(29378.246000, 25491.598000, 1299.480037, 1299.480037, 0.000000, X, Y)
[Fri Dec 30 19:32:21 2011] Writing fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src27.gif
[Fri Dec 30 20:47:04 2011] Mean detx,y = (-2406.50, 397.22) 
[Fri Dec 30 20:47:07 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 20:47:33 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 20:47:34 2011] Setting source spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri Dec 30 20:47:34 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sat Dec 31 07:06:09 2011] Updating aperture counts using extracted products
[Sat Dec 31 07:06:09 2011] Error reading totcts from fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat Dec 31 07:06:12 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 07:06:12 2011] Using photon index=1.80, rate=0.00893, arf fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src27.arf
[Sat Dec 31 07:06:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 07:06:12 2011] Updating source flux to 8.5e-14
[Sat Dec 31 07:16:41 2011] Flag c found in src. 27 procflags, skipping spectral fitting