[Sat Dec 24 10:46:59 2011] Detection parameters:
  Position = (331.5, 342.0) = 11 50 50.15 -62 18 56.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 360.1 +/- 30.9
  Background counts = 145.7
  Rate = 0.02 +/- 0.002

[Sat Dec 24 10:47:01 2011] Off-axis axis estimate = 3.97'
[Sat Dec 24 23:36:09 2011] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 23:36:09 2011] Initial guess for spatial extent in simple fitting = 8.41"
[Sat Dec 24 23:36:09 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.844
[Sat Dec 24 23:36:09 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 8.41"
[Sun Dec 25 09:36:12 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src27.ximg exists
[Sun Dec 25 09:36:12 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun Dec 25 09:36:12 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src27 appears to have run properly
[Sun Dec 25 09:36:17 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun Dec 25 09:36:17 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun Dec 25 09:36:17 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sun Dec 25 09:37:32 2011] Spatial fit model total counts = 1844.110000, observed total counts = 1842.000000
[Sun Dec 25 09:37:32 2011] Offset between fit and detection position for source 26 = 2.712236 pixels
[Sun Dec 25 09:37:32 2011] 1601.079000 total counts/ 1170.850000 bgd. counts: snr = 12.573293
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 2.712236 pixels
  Position = (334.0, 341.1) = 11 50 48.57 -62 19 1.8
  Extent = 16.8 (16.8-33.6)", rotation angle = 0
  Source counts = 430.2 +/- 40.0
  Background counts = 1170.8
  Rate = 0.03 +/- 0.003
[Sun Dec 25 09:37:32 2011] Spatial fit model total counts = 1846.520000, observed total counts = 1845.000000
[Sun Dec 25 09:37:32 2011] Offset between fit and detection position for source 26 = 1.935878 pixels
[Sun Dec 25 09:37:32 2011] Warning, changing simple spatial fit ID from 27 to 37
[Sun Dec 25 09:37:32 2011] 1743.511000 total counts/ 1318.780000 bgd. counts: snr = 11.695742
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.935878 pixels
  Position = (332.5, 339.9) = 11 50 49.56 -62 19 6.7
  Extent = 16.6 (16.6-33.2)", rotation angle = 0
  Source counts = 424.7 +/- 41.8
  Background counts = 1318.8
  Rate = 0.03 +/- 0.003
[Sun Dec 25 09:37:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 09:37:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 09:37:32 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 09:37:32 2011] Source does appear to be extended
[Sun Dec 25 09:37:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 09:37:32 2011] Source is confused with source 14
[Mon Dec 26 05:27:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 26 05:27:18 2011] Initial guess for spatial extent in simple fitting = 16.62"
[Mon Dec 26 05:27:18 2011] source mask rpix=3.8, npix_max = 74, mask sum = 72, frac = 0.964
[Mon Dec 26 05:27:18 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 16.62"
[Mon Dec 26 20:26:21 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src26.ximg exists
[Mon Dec 26 20:26:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src26.csv
[Mon Dec 26 20:26:21 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon Dec 26 20:26:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src26.csv
[Mon Dec 26 20:26:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 20:26:23 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon Dec 26 20:26:23 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Dec 26 20:26:23 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Mon Dec 26 20:27:36 2011] Warning, spatial fit 26 centroid is now closest to src. 25
[Mon Dec 26 20:27:36 2011] Spatial fit model total counts = 3969.990000, observed total counts = 3969.000000
[Mon Dec 26 20:27:36 2011] Offset between fit and detection position for source 26 = 4.537274 pixels
[Mon Dec 26 20:27:36 2011] Warning, changing simple spatial fit ID from 26 to 31
[Mon Dec 26 20:27:36 2011] 3629.230000 total counts/ 1532.570000 bgd. counts: snr = 53.557198
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 4.537274 pixels
  Position = (328.0, 339.2) = 11 50 52.35 -62 19 9.7
  Extent = 33.0 (32.3-66.0)", rotation angle = 0
  Source counts = 2096.7 +/- 60.2
  Background counts = 1532.6
  Rate = 0.2 +/- 0.005
[Mon Dec 26 20:27:36 2011] Spatial fit model total counts = 1851.080000, observed total counts = 1845.000000
[Mon Dec 26 20:27:36 2011] Offset between fit and detection position for source 26 = 4.164543 pixels
[Mon Dec 26 20:27:36 2011] Warning, changing simple spatial fit ID from 31 to 35
[Mon Dec 26 20:27:36 2011] 1808.746000 total counts/ 1444.290000 bgd. counts: snr = 9.589984
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 4.164543 pixels
  Position = (332.1, 339.6) = 11 50 49.77 -62 19 7.9
  Extent = 16.6 (16.6-33.2)", rotation angle = 0
  Source counts = 364.5 +/- 42.5
  Background counts = 1444.3
  Rate = 0.03 +/- 0.003
[Mon Dec 26 20:27:36 2011] Source 26 is offset by -3.037862 and -0.875402 pixels which is larger than
2 X fitted extent = 1.878368 x 1.878368, not incorporating fit results
[Mon Dec 26 20:27:36 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 20:27:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 20:27:36 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 20:27:36 2011] Source does appear to be extended
[Mon Dec 26 20:27:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 19:32:21 2011] XMMSAS src. selection expression = ellipse(28845.222000, 29500.746000, 997.194029, 997.194029, 0.000000, X, Y)
[Fri Dec 30 19:32:21 2011] Writing source region out to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src26_src.reg
[Fri Dec 30 19:32:21 2011] Extracting stamp from image fullrun_mos2_xmm0503220101_pi300-10000_cl_sm2.00.img.gz, (275, 282) - (389, 397)
[Fri Dec 30 19:32:21 2011] XMMSAS bgd. selection expression = annulus(28845.222000, 29500.746000, 1661.990048, 3323.980096, X, Y) && !ellipse(25664.698000, 31630.346000, 1102.200032, 1102.200032, 0.000000, X, Y) && !ellipse(25475.259793, 31983.694295, 1438.600041, 824.482572, 64.717659, X, Y) && !ellipse(24541.768000, 31931.870000, 1462.032042, 645.864819, 59.995000, X, Y) && !ellipse(25390.228000, 29690.658000, 1824.984053, 1824.984053, 0.000000, X, Y) && !ellipse(31711.718000, 26318.446000, 2874.528083, 2018.472058, 37.699900, X, Y) && !ellipse(26484.692600, 32057.642500, 1434.776041, 1434.776041, 0.000000, X, Y) && !ellipse(31217.430000, 26723.900000, 1410.488041, 1410.488041, 0.000000, X, Y) && !ellipse(27959.665400, 29756.422200, 1316.576038, 1316.576038, 0.000000, X, Y) && !ellipse(25610.410000, 29550.650000, 2019.584058, 1029.624030, 219.589000, X, Y) && !ellipse(32399.834000, 25793.442000, 3029.152087, 3029.152087, 0.000000, X, Y) && !ellipse(26252.870000, 30874.532000, 1067.240031, 1067.240031, 0.000000, X, Y) && !ellipse(25182.065521, 30482.552734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30247.258800, 27876.926796, 940.864027, 940.864027, 0.000000, X, Y) && !ellipse(28247.508000, 29214.204000, 1251.528036, 1251.528036, 0.000000, X, Y) && !ellipse(31174.920000, 26863.826000, 1354.784039, 1354.784039, 0.000000, X, Y) && !ellipse(29905.260000, 28320.510000, 1881.728054, 1881.728054, 0.000000, X, Y) && !ellipse(28026.124000, 29992.756000, 2659.184077, 2659.184077, 0.000000, X, Y) && !ellipse(25017.421600, 30094.900000, 1336.944038, 1336.944038, 0.000000, X, Y) && !ellipse(33189.872940, 25140.471400, 1514.576044, 1514.576044, 0.000000, X, Y) && !ellipse(29684.490000, 28958.440000, 1843.552053, 1843.552053, 0.000000, X, Y) && !ellipse(29202.427704, 29011.292145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30654.282000, 27651.500000, 2316.584067, 2316.584067, 0.000000, X, Y) && !ellipse(29443.914000, 28178.096000, 1307.344038, 1307.344038, 0.000000, X, Y) && !ellipse(26070.576000, 28849.442000, 532.338415, 532.338415, 0.000000, X, Y) && !ellipse(28658.417511, 28491.020569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32153.914000, 25433.892000, 1422.096041, 1422.096041, 0.000000, X, Y) && !ellipse(30170.062000, 26466.044000, 2341.960067, 2341.960067, 0.000000, X, Y) && !ellipse(29378.246000, 25491.598000, 1299.480037, 1299.480037, 0.000000, X, Y)
[Fri Dec 30 19:32:21 2011] Writing fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src26.gif
[Fri Dec 30 20:45:59 2011] Mean detx,y = (-2874.01, 312.07) 
[Fri Dec 30 20:46:02 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 20:46:26 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 20:46:27 2011] Setting source spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Dec 30 20:46:27 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sat Dec 31 07:06:09 2011] Updating aperture counts using extracted products
[Sat Dec 31 07:06:09 2011] Error reading totcts from fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Dec 31 07:06:12 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 07:06:12 2011] Using photon index=1.80, rate=0.0286, arf fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src26.arf
[Sat Dec 31 07:06:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 07:06:12 2011] Updating source flux to 2.7e-13
[Sat Dec 31 07:16:41 2011] Flag b found in src. 26 procflags, skipping spectral fitting
[Sat Dec 31 07:16:41 2011] Flag c found in src. 26 procflags, skipping spectral fitting