[Sat Dec 24 10:46:59 2011] Detection parameters:
  Position = (251.7, 373.4) = 11 51 39.90 -62 16 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 263.2 +/- 24.2
  Background counts = 94.7
  Rate = 0.02 +/- 0.002

[Sat Dec 24 10:47:01 2011] Off-axis axis estimate = 6.40'
[Sat Dec 24 23:36:09 2011] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 23:36:09 2011] Initial guess for spatial extent in simple fitting = 9.63"
[Sat Dec 24 23:36:09 2011] source mask rpix=2.2, npix_max = 29, mask sum = 23, frac = 0.781
[Sat Dec 24 23:36:09 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 9.63"
[Sun Dec 25 09:36:12 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src24.ximg exists
[Sun Dec 25 09:36:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src24.csv
[Sun Dec 25 09:36:12 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src24_1.ximg exists
[Sun Dec 25 09:36:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src24.csv
[Sun Dec 25 09:36:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 09:36:16 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sun Dec 25 09:36:17 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sun Dec 25 09:36:17 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Sun Dec 25 09:37:32 2011] Warning, spatial fit 24 centroid is now closest to src. 56
[Sun Dec 25 09:37:32 2011] Source 21 is offset by -4.587812 and -3.106756 pixels which is larger than
2 X fitted extent = 3.087641 x 3.087641, not incorporating fit results
[Sun Dec 25 09:37:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 09:37:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 09:37:32 2011] Assessing source extent using major
[Sun Dec 25 09:37:32 2011] Source does appear to be extended
[Sun Dec 25 09:37:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 09:37:32 2011] Source is confused with source 20
[Mon Dec 26 05:27:18 2011] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 05:27:18 2011] Initial guess for spatial extent in simple fitting = 9.63"
[Mon Dec 26 05:27:18 2011] source mask rpix=2.2, npix_max = 29, mask sum = 23, frac = 0.781
[Mon Dec 26 05:27:18 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 9.63"
[Mon Dec 26 20:26:21 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src24.ximg exists
[Mon Dec 26 20:26:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src24.csv
[Mon Dec 26 20:26:21 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src24_1.ximg exists
[Mon Dec 26 20:26:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src24.csv
[Mon Dec 26 20:26:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 20:26:23 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Mon Dec 26 20:26:23 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Mon Dec 26 20:26:23 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Mon Dec 26 20:27:36 2011] Warning, spatial fit 24 centroid is now closest to src. 38
[Mon Dec 26 20:27:36 2011] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 15.371231 pixels away
[Mon Dec 26 20:27:36 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 20:27:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 20:27:36 2011] Assessing source extent using major
[Mon Dec 26 20:27:36 2011] Source does appear to be extended
[Mon Dec 26 20:27:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 19:32:21 2011] XMMSAS src. selection expression = ellipse(21853.062347, 32437.586212, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 30 19:32:21 2011] Writing source region out to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src21_src.reg
[Fri Dec 30 19:32:21 2011] Extracting stamp from image fullrun_mos2_xmm0503220101_pi300-10000_cl_sm2.00.img.gz, (214, 336) - (289, 411)
[Fri Dec 30 19:32:21 2011] XMMSAS bgd. selection expression = annulus(21853.062347, 32437.586212, 1087.500000, 2175.000000, X, Y) && !ellipse(22699.726000, 32481.335000, 1501.840043, 1501.840043, 0.000000, X, Y) && !ellipse(22845.990000, 32358.300000, 1500.072043, 1500.072043, 0.000000, X, Y) && !ellipse(23026.852000, 32375.478000, 1463.880042, 345.408810, 65.676000, X, Y) && !ellipse(23919.209800, 30782.334000, 826.696024, 826.696024, 0.000000, X, Y) && !ellipse(24333.345581, 32221.912872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24541.768000, 31931.870000, 1462.032042, 645.864819, 59.995000, X, Y) && !ellipse(23697.726257, 32056.939972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23961.585724, 31415.394623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25390.228000, 29690.658000, 1824.984053, 1824.984053, 0.000000, X, Y) && !ellipse(23358.443080, 30612.710600, 519.044015, 519.044015, 0.000000, X, Y) && !ellipse(25610.410000, 29550.650000, 2019.584058, 1029.624030, 219.589000, X, Y) && !ellipse(24424.829800, 29906.883400, 1016.168029, 1016.168029, 0.000000, X, Y) && !ellipse(23484.171631, 32585.158051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25017.421600, 30094.900000, 1336.944038, 1336.944038, 0.000000, X, Y) && !ellipse(21618.744000, 32147.871400, 1550.880045, 1550.880045, 0.000000, X, Y) && !ellipse(22439.199890, 31178.767792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22564.384000, 29533.282000, 1361.272039, 1361.272039, 0.000000, X, Y) && !ellipse(21541.748000, 33259.912000, 725.025621, 725.025621, 0.000000, X, Y) && !ellipse(22613.853027, 30824.387756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23550.143799, 33259.307159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21894.050690, 31279.499603, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 30 19:32:21 2011] Writing fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src21.gif
[Fri Dec 30 20:44:53 2011] Mean detx,y = (1907.62, 5924.42) 
[Fri Dec 30 20:44:56 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 20:45:24 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 20:45:24 2011] Setting source spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Dec 30 20:45:24 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat Dec 31 00:17:59 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 31 00:17:59 2011] rmf not generated due to insufficient counts
[Sat Dec 31 07:06:09 2011] Updating aperture counts using extracted products
[Sat Dec 31 07:06:09 2011] Error reading totcts from fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Dec 31 07:06:12 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 07:06:12 2011] Using photon index=1.80, rate=0.0208, arf fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src21.arf
[Sat Dec 31 07:06:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 07:06:12 2011] Updating source flux to 3.2e-13
[Sat Dec 31 07:16:41 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting