[Sat Dec 24 10:46:59 2011] Detection parameters:
  Position = (258.5, 374.9) = 11 51 35.71 -62 16 33.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 679.0 +/- 34.6
  Background counts = 98.3
  Rate = 0.05 +/- 0.003

[Sat Dec 24 10:47:01 2011] Off-axis axis estimate = 6.26'
[Sat Dec 24 23:36:09 2011] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 23:36:09 2011] Initial guess for spatial extent in simple fitting = 9.56"
[Sat Dec 24 23:36:09 2011] source mask rpix=2.2, npix_max = 29, mask sum = 27, frac = 0.928
[Sat Dec 24 23:36:09 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 9.56"
[Sun Dec 25 09:36:12 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Dec 25 09:36:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src3.csv
[Sun Dec 25 09:36:12 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Dec 25 09:36:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src3.csv
[Sun Dec 25 09:36:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 09:36:15 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Dec 25 09:36:15 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Dec 25 09:36:15 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Dec 25 09:37:31 2011] Spatial fit model total counts = 1830.340000, observed total counts = 1834.000000
[Sun Dec 25 09:37:31 2011] Offset between fit and detection position for source 20 = 3.382147 pixels
[Sun Dec 25 09:37:31 2011] 1765.372000 total counts/ 562.172000 bgd. counts: snr = 50.746164
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 3.382147 pixels
  Position = (261.6, 373.6) = 11 51 33.77 -62 16 40.2
  Extent = 19.1 (19.0-38.2)", rotation angle = 0
  Source counts = 1203.2 +/- 42.0
  Background counts = 562.2
  Rate = 0.09 +/- 0.003
[Sun Dec 25 09:37:31 2011] Spatial fit model total counts = 2181.090000, observed total counts = 2182.000000
[Sun Dec 25 09:37:31 2011] Offset between fit and detection position for source 20 = 0.869041 pixels
[Sun Dec 25 09:37:31 2011] Warning, changing simple spatial fit ID from 3 to 5
[Sun Dec 25 09:37:31 2011] 2042.310000 total counts/ 1099.640000 bgd. counts: snr = 28.427222
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.869041 pixels
  Position = (260.7, 373.7) = 11 51 34.31 -62 16 39.7
  Extent = 18.8 (18.7-37.5)", rotation angle = 0
  Source counts = 942.7 +/- 45.2
  Background counts = 1099.6
  Rate = 0.07 +/- 0.004
[Sun Dec 25 09:37:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 09:37:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 09:37:32 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 09:37:32 2011] Source does appear to be extended
[Sun Dec 25 09:37:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 09:37:32 2011] Source is confused with source 8
[Sun Dec 25 09:37:32 2011] Source is confused with source 6
[Sun Dec 25 09:37:32 2011] Source is confused with source 33
[Sun Dec 25 09:37:32 2011] Source is confused with source 21
[Sun Dec 25 09:37:32 2011] Source is confused with source 40
[Mon Dec 26 05:27:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 26 05:27:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 26 05:27:18 2011] Initial guess for spatial extent in simple fitting = 18.77"
[Mon Dec 26 05:27:18 2011] source mask rpix=4.3, npix_max = 92, mask sum = 76, frac = 0.820
[Mon Dec 26 05:27:18 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 18.77"
[Mon Dec 26 20:26:20 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src3.ximg exists
[Mon Dec 26 20:26:20 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Dec 26 20:26:20 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src3 appears to have run properly
[Mon Dec 26 20:26:22 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Dec 26 20:26:22 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Dec 26 20:26:22 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Dec 26 20:27:35 2011] Warning, spatial fit 3 centroid is now closest to src. 38
[Mon Dec 26 20:27:36 2011] Spatial fit model total counts = 1796.910000, observed total counts = 1794.000000
[Mon Dec 26 20:27:36 2011] Offset between fit and detection position for source 20 = 0.786116 pixels
[Mon Dec 26 20:27:36 2011] Warning, changing simple spatial fit ID from 3 to 21
[Mon Dec 26 20:27:36 2011] 1797.072000 total counts/ 1163.490000 bgd. counts: snr = 18.574687
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.786116 pixels
  Position = (261.5, 373.9) = 11 51 33.83 -62 16 38.9
  Extent = 18.8 (18.8-37.5)", rotation angle = 0
  Source counts = 633.6 +/- 42.4
  Background counts = 1163.5
  Rate = 0.05 +/- 0.003
[Mon Dec 26 20:27:36 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 20:27:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 20:27:36 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 20:27:36 2011] Source does appear to be extended
[Mon Dec 26 20:27:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 19:32:19 2011] XMMSAS src. selection expression = ellipse(22699.726000, 32481.335000, 1126.380032, 1126.380032, 0.000000, X, Y)
[Fri Dec 30 19:32:19 2011] Writing source region out to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src20_src.reg
[Fri Dec 30 19:32:19 2011] Extracting stamp from image fullrun_mos2_xmm0503220101_pi300-10000_cl_sm2.00.img.gz, (197, 309) - (326, 439)
[Fri Dec 30 19:32:19 2011] XMMSAS bgd. selection expression = annulus(22699.726000, 32481.335000, 1877.300054, 3754.600108, X, Y) && !ellipse(25664.698000, 31630.346000, 1102.200032, 1102.200032, 0.000000, X, Y) && !ellipse(25475.259793, 31983.694295, 1438.600041, 824.482572, 64.717659, X, Y) && !ellipse(22845.990000, 32358.300000, 1500.072043, 1500.072043, 0.000000, X, Y) && !ellipse(23026.852000, 32375.478000, 1463.880042, 345.408810, 65.676000, X, Y) && !ellipse(23919.209800, 30782.334000, 826.696024, 826.696024, 0.000000, X, Y) && !ellipse(24333.345581, 32221.912872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24541.768000, 31931.870000, 1462.032042, 645.864819, 59.995000, X, Y) && !ellipse(23697.726257, 32056.939972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23961.585724, 31415.394623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25390.228000, 29690.658000, 1824.984053, 1824.984053, 0.000000, X, Y) && !ellipse(26484.692600, 32057.642500, 1434.776041, 1434.776041, 0.000000, X, Y) && !ellipse(23358.443080, 30612.710600, 519.044015, 519.044015, 0.000000, X, Y) && !ellipse(25610.410000, 29550.650000, 2019.584058, 1029.624030, 219.589000, X, Y) && !ellipse(24424.829800, 29906.883400, 1016.168029, 1016.168029, 0.000000, X, Y) && !ellipse(23484.171631, 32585.158051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26252.870000, 30874.532000, 1067.240031, 1067.240031, 0.000000, X, Y) && !ellipse(21853.062347, 32437.586212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25182.065521, 30482.552734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28026.124000, 29992.756000, 2659.184077, 2659.184077, 0.000000, X, Y) && !ellipse(25017.421600, 30094.900000, 1336.944038, 1336.944038, 0.000000, X, Y) && !ellipse(21618.744000, 32147.871400, 1550.880045, 1550.880045, 0.000000, X, Y) && !ellipse(22439.199890, 31178.767792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22564.384000, 29533.282000, 1361.272039, 1361.272039, 0.000000, X, Y) && !ellipse(21541.748000, 33259.912000, 725.025621, 725.025621, 0.000000, X, Y) && !ellipse(26070.576000, 28849.442000, 532.338415, 532.338415, 0.000000, X, Y) && !ellipse(22613.853027, 30824.387756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23550.143799, 33259.307159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21894.050690, 31279.499603, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 30 19:32:19 2011] Writing fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src20.gif
[Fri Dec 30 19:51:37 2011] Mean detx,y = (1251.15, 5547.55) 
[Fri Dec 30 19:51:40 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 19:52:41 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 19:52:42 2011] Setting source spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri Dec 30 19:52:42 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat Dec 31 07:06:08 2011] Updating aperture counts using extracted products
[Sat Dec 31 07:06:08 2011] Error reading totcts from fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Dec 31 07:06:11 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 07:06:11 2011] Using photon index=1.80, rate=0.0497, arf fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src20.arf
[Sat Dec 31 07:06:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 07:06:11 2011] Updating source flux to 6.7e-13
[Sat Dec 31 07:16:40 2011] Flag c found in src. 20 procflags, skipping spectral fitting