[Sat Dec 24 10:46:59 2011] Detection parameters:
  Position = (404.4, 262.9) = 11 50 4.46 -62 24 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 353.8 +/- 25.9
  Background counts = 66.7
  Rate = 0.03 +/- 0.002

[Sat Dec 24 10:47:01 2011] Off-axis axis estimate = 8.10'
[Sat Dec 24 23:36:09 2011] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 23:36:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 24 23:36:09 2011] Initial guess for spatial extent in simple fitting = 10.48"
[Sat Dec 24 23:36:09 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.886
[Sat Dec 24 23:36:09 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 10.48"
[Sun Dec 25 09:36:12 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src7.ximg exists
[Sun Dec 25 09:36:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src7.csv
[Sun Dec 25 09:36:12 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Dec 25 09:36:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src7.csv
[Sun Dec 25 09:36:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 09:36:15 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Dec 25 09:36:15 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Dec 25 09:36:15 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Dec 25 09:37:31 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 10.209598 pixels away
[Sun Dec 25 09:37:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 09:37:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 09:37:32 2011] Assessing source extent using major
[Sun Dec 25 09:37:32 2011] Source does appear to be extended
[Sun Dec 25 09:37:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 05:27:18 2011] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 05:27:18 2011] Initial guess for spatial extent in simple fitting = 10.48"
[Mon Dec 26 05:27:18 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.886
[Mon Dec 26 05:27:18 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 10.48"
[Mon Dec 26 20:26:20 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src7.ximg exists
[Mon Dec 26 20:26:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src7.csv
[Mon Dec 26 20:26:20 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Dec 26 20:26:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src7.csv
[Mon Dec 26 20:26:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 20:26:22 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Dec 26 20:26:22 2011] fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Dec 26 20:26:22 2011] Fit fullrun_mos2_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Dec 26 20:27:35 2011] Spatial fit model total counts = 454.323000, observed total counts = 455.000000
[Mon Dec 26 20:27:35 2011] Offset between fit and detection position for source 19 = 0.273951 pixels
[Mon Dec 26 20:27:35 2011] 441.296000 total counts/ 286.848000 bgd. counts: snr = 9.119192
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.273951 pixels
  Position = (404.4, 262.7) = 11 50 4.45 -62 24 41.9
  Extent = 7.0 (6.0-8.4)", rotation angle = 0
  Source counts = 154.4 +/- 21.0
  Background counts = 286.8
  Rate = 0.01 +/- 0.002
[Mon Dec 26 20:27:36 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 20:27:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 20:27:36 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 20:27:36 2011] Source does appear to be extended
[Mon Dec 26 20:27:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 19:32:19 2011] XMMSAS src. selection expression = ellipse(35132.461000, 22802.979400, 418.690212, 418.690212, 0.000000, X, Y)
[Fri Dec 30 19:32:19 2011] Writing source region out to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src19_src.reg
[Fri Dec 30 19:32:19 2011] Extracting stamp from image fullrun_mos2_xmm0503220101_pi300-10000_cl_sm2.00.img.gz, (380, 239) - (428, 287)
[Fri Dec 30 19:32:19 2011] XMMSAS bgd. selection expression = annulus(35132.461000, 22802.979400, 697.817020, 1395.634040, X, Y) && !ellipse(31711.718000, 26318.446000, 2874.528083, 2018.472058, 37.699900, X, Y) && !ellipse(32399.834000, 25793.442000, 3029.152087, 3029.152087, 0.000000, X, Y) && !ellipse(33189.872940, 25140.471400, 1514.576044, 1514.576044, 0.000000, X, Y) && !ellipse(33478.924000, 24675.266000, 1141.320033, 1141.320033, 0.000000, X, Y) && !ellipse(34137.526000, 23541.118000, 1146.736033, 1146.736033, 0.000000, X, Y)
[Fri Dec 30 19:32:19 2011] Writing fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src19.gif
[Fri Dec 30 19:55:41 2011] Mean detx,y = (-5725.46, -8449.97) 
[Fri Dec 30 19:55:44 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 19:56:03 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 19:56:04 2011] Setting source spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Dec 30 19:56:04 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat Dec 31 07:06:08 2011] Updating aperture counts using extracted products
[Sat Dec 31 07:06:08 2011] Error reading totcts from fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Dec 31 07:06:11 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 07:06:11 2011] Using photon index=1.80, rate=0.0121, arf fullrun_mos2_xmm0503220101_pi300-10000_pass1_cl_src19.arf
[Sat Dec 31 07:06:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 07:06:11 2011] Updating source flux to 2.2e-13