[Sat Dec 24 10:45:56 2011] Detection parameters:
  Position = (368.0, 305.0) = 11 50 27.28 -62 21 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 266.2 +/- 28.1
  Background counts = 128.8
  Rate = 0.02 +/- 0.002

[Sat Dec 24 10:45:57 2011] Off-axis axis estimate = 5.07'
[Sat Dec 24 18:32:09 2011] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 18:32:09 2011] Initial guess for spatial extent in simple fitting = 8.96"
[Sat Dec 24 18:32:09 2011] source mask rpix=2.1, npix_max = 26, mask sum = 36, frac = 1.373
[Sat Dec 24 18:32:09 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 8.96"
[Sat Dec 24 23:36:06 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_src30.ximg exists
[Sat Dec 24 23:36:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_src30.csv
[Sat Dec 24 23:36:06 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_src30_1.ximg exists
[Sat Dec 24 23:36:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_src30.csv
[Sat Dec 24 23:36:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 23:36:08 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sat Dec 24 23:36:08 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sat Dec 24 23:36:08 2011] Fit fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Sun Dec 25 09:37:08 2011] Warning, spatial fit 30 centroid is now closest to src. 36
[Sun Dec 25 09:37:08 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 09:37:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 09:37:08 2011] Assessing source extent using major
[Sun Dec 25 09:37:08 2011] Source does appear to be extended
[Sun Dec 25 09:37:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 09:37:08 2011] Source is confused with source 15
[Sun Dec 25 20:06:30 2011] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 20:06:30 2011] Initial guess for spatial extent in simple fitting = 8.96"
[Sun Dec 25 20:06:30 2011] source mask rpix=2.1, npix_max = 26, mask sum = 36, frac = 1.373
[Sun Dec 25 20:06:30 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 8.96"
[Mon Dec 26 05:27:15 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_src28.ximg exists
[Mon Dec 26 05:27:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_src28.csv
[Mon Dec 26 05:27:15 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_src28_1.ximg exists
[Mon Dec 26 05:27:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_src28.csv
[Mon Dec 26 05:27:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 05:27:17 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Mon Dec 26 05:27:17 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Mon Dec 26 05:27:17 2011] Fit fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Mon Dec 26 20:27:08 2011] Spatial fit model total counts = 1588.440000, observed total counts = 1582.000000
[Mon Dec 26 20:27:08 2011] Offset between fit and detection position for source 37 = 8.952301 pixels
[Mon Dec 26 20:27:08 2011] 1526.364000 total counts/ 1254.070000 bgd. counts: snr = 7.689130
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 8.952301 pixels
  Position = (361.0, 310.5) = 11 50 31.68 -62 21 14.4
  Extent = 17.9 (17.9-35.8)", rotation angle = 0
  Source counts = 272.3 +/- 39.1
  Background counts = 1254.1
  Rate = 0.02 +/- 0.003
[Mon Dec 26 20:27:08 2011] Spatial fit model total counts = 3039.610000, observed total counts = 3042.000000
[Mon Dec 26 20:27:08 2011] Offset between fit and detection position for source 37 = 2.860876 pixels
[Mon Dec 26 20:27:08 2011] Warning, changing simple spatial fit ID from 28 to 29
[Mon Dec 26 20:27:08 2011] 2957.080000 total counts/ 1330.800000 bgd. counts: snr = 44.579883
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 2.860876 pixels
  Position = (360.3, 307.8) = 11 50 32.13 -62 21 26.4
  Extent = 35.8 (35.8-71.7)", rotation angle = 0
  Source counts = 1626.3 +/- 54.4
  Background counts = 1330.8
  Rate = 0.1 +/- 0.004
[Mon Dec 26 20:27:08 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 20:27:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 20:27:08 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 20:27:08 2011] Source does appear to be extended
[Mon Dec 26 20:27:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 23:26:21 2011] Counts = 1626.280000, rescaling region sizes by 2.000000
[Tue Dec 27 23:26:21 2011] XMMSAS src. selection expression = ellipse(31296.208000, 26726.978000, 4301.952124, 4301.952124, 0.000000, X, Y)
[Tue Dec 27 23:26:21 2011] Writing source region out to fullrun_mos1_xmm0503220101_pi300-10000_pass1_cl_src37_src.reg
[Tue Dec 27 23:26:21 2011] Extracting stamp from image fullrun_mos1_xmm0503220101_pi300-10000_cl_sm2.00.img.gz, (113, 61) - (595, 555)
[Tue Dec 27 23:26:21 2011] XMMSAS bgd. selection expression = annulus(31296.208000, 26726.978000, 14339.840413, 28679.680825, X, Y) && !ellipse(25455.163400, 31909.142000, 2353.520068, 2353.520068, 0.000000, X, Y) && !ellipse(25324.642000, 31062.372000, 828.848024, 828.848024, 0.000000, X, Y) && !ellipse(22449.154000, 32581.820000, 734.336821, 734.336821, 0.000000, X, Y) && !ellipse(25056.516747, 32627.058693, 2906.976084, 2100.783169, 72.413214, X, Y) && !ellipse(25852.215400, 29814.880400, 528.473615, 528.473615, 0.000000, X, Y) && !ellipse(24137.990956, 30324.328721, 2163.555866, 1525.916460, 0.000000, X, Y) && !ellipse(27212.476000, 29586.312000, 1086.784031, 1086.784031, 0.000000, X, Y) && !ellipse(28177.608000, 29867.246000, 1902.208055, 1902.208055, 0.000000, X, Y) && !ellipse(23486.154000, 30711.310000, 1419.112041, 1419.112041, 0.000000, X, Y) && !ellipse(30814.516000, 27148.702000, 1324.400038, 1324.400038, 0.000000, X, Y) && !ellipse(25576.408000, 29772.612000, 1304.160038, 1304.160038, 0.000000, X, Y) && !ellipse(31668.076000, 25910.690000, 1398.408040, 1398.408040, 0.000000, X, Y) && !ellipse(26378.498718, 30316.881561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27951.662000, 29507.903000, 2173.568063, 2173.568063, 0.000000, X, Y) && !ellipse(21919.880142, 33177.311890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26308.692000, 31145.554000, 1361.816039, 661.765619, 204.378000, X, Y) && !ellipse(25031.512085, 30403.278870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30110.630000, 27670.836000, 1343.496039, 1343.496039, 0.000000, X, Y) && !ellipse(30324.246000, 27560.630000, 2790.576080, 2790.576080, 0.000000, X, Y) && !ellipse(29131.216600, 29641.724200, 748.295222, 748.295222, 0.000000, X, Y) && !ellipse(26561.507233, 29599.991791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27156.852000, 30695.200000, 2727.888078, 2727.888078, 0.000000, X, Y) && !ellipse(32273.138000, 25802.552000, 2544.048073, 1774.104051, 29.649000, X, Y) && !ellipse(21700.858000, 32067.363800, 1542.360044, 1542.360044, 0.000000, X, Y) && !ellipse(28006.300000, 30067.528000, 1363.944039, 1363.944039, 0.000000, X, Y) && !ellipse(29293.530000, 28882.684000, 1320.584038, 1320.584038, 0.000000, X, Y) && !ellipse(32418.146000, 26182.900000, 1433.984041, 1433.984041, 0.000000, X, Y) && !ellipse(29971.948000, 27481.242000, 1316.520038, 1316.520038, 0.000000, X, Y) && !ellipse(29621.655980, 28881.384000, 1327.384038, 1327.384038, 0.000000, X, Y) && !ellipse(32778.203145, 25285.618986, 1277.952037, 1266.092211, 88.423837, X, Y) && !ellipse(25767.690643, 30310.597107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29658.550000, 28311.238000, 2686.832077, 2686.832077, 0.000000, X, Y) && !ellipse(28704.928314, 28659.450317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30813.644000, 26611.888000, 2631.776076, 2631.776076, 0.000000, X, Y) && !ellipse(33409.006000, 24998.958000, 2987.504086, 2987.504086, 0.000000, X, Y) && !ellipse(28190.940000, 29228.478000, 1289.424037, 1289.424037, 0.000000, X, Y) && !ellipse(22112.640000, 29642.710000, 1374.704040, 1374.704040, 0.000000, X, Y) && !ellipse(29652.298000, 25867.212000, 1307.992038, 1307.992038, 0.000000, X, Y) && !ellipse(30268.186000, 25144.450000, 1364.720039, 1364.720039, 0.000000, X, Y) && !ellipse(33407.784363, 25856.671295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12705.246500, 32159.227000, 1131.632033, 1131.632033, 0.000000, X, Y) && !ellipse(14150.262000, 35319.544000, 2020.776058, 2020.776058, 0.000000, X, Y)
[Tue Dec 27 23:26:21 2011] Writing fullrun_mos1_xmm0503220101_pi300-10000_pass1_cl_src37.gif
[Wed Dec 28 01:53:46 2011] Mean detx,y = (-2380.74, 3341.44) 
[Wed Dec 28 01:53:52 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 02:26:04 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 02:26:06 2011] Setting source spectrum file to fullrun_mos1_xmm0503220101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Wed Dec 28 02:26:06 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0503220101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sat Dec 31 07:06:04 2011] Updating aperture counts using extracted products
[Sat Dec 31 07:06:04 2011] Error reading totcts from fullrun_mos1_xmm0503220101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat Dec 31 07:06:07 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 07:06:07 2011] Using photon index=1.80, rate=0.127, arf fullrun_mos1_xmm0503220101_pi300-10000_pass1_cl_src37.arf
[Sat Dec 31 07:06:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 07:06:07 2011] Updating source flux to 1.2e-12
[Sat Dec 31 07:06:16 2011] Flag c found in src. 37 procflags, skipping spectral fitting