[Sat Dec 24 10:45:56 2011] Detection parameters:
  Position = (330.5, 330.0) = 11 50 50.76 -62 19 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 221.7 +/- 27.1
  Background counts = 156.0
  Rate = 0.01 +/- 0.001

[Sat Dec 24 10:45:57 2011] Off-axis axis estimate = 3.26'
[Sat Dec 24 18:32:09 2011] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 18:32:09 2011] Initial guess for spatial extent in simple fitting = 8.06"
[Sat Dec 24 18:32:09 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.903
[Sat Dec 24 18:32:09 2011] Giving source the simple spatial ID 38 for pass 0, mean size = 8.06"
[Sat Dec 24 23:36:06 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_src38.ximg exists
[Sat Dec 24 23:36:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_src38.csv
[Sat Dec 24 23:36:06 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_src38_1.ximg exists
[Sat Dec 24 23:36:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_src38.csv
[Sat Dec 24 23:36:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 23:36:08 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sat Dec 24 23:36:08 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sat Dec 24 23:36:08 2011] Fit fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Sun Dec 25 09:37:08 2011] Warning, spatial fit 38 centroid is now closest to src. 30
[Sun Dec 25 09:37:08 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 09:37:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 09:37:08 2011] Assessing source extent using major
[Sun Dec 25 09:37:08 2011] Source does appear to be extended
[Sun Dec 25 09:37:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 09:37:08 2011] Source is confused with source 30
[Sun Dec 25 20:06:30 2011] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 20:06:30 2011] Initial guess for spatial extent in simple fitting = 8.06"
[Sun Dec 25 20:06:30 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.903
[Sun Dec 25 20:06:30 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 8.06"
[Mon Dec 26 05:27:15 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_src35.ximg exists
[Mon Dec 26 05:27:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_src35.csv
[Mon Dec 26 05:27:15 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_src35_1.ximg exists
[Mon Dec 26 05:27:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_src35.csv
[Mon Dec 26 05:27:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 05:27:17 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Mon Dec 26 05:27:18 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Mon Dec 26 05:27:18 2011] Fit fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Mon Dec 26 20:27:08 2011] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 10.091768 pixels away
[Mon Dec 26 20:27:08 2011] Warning, spatial fit 35 centroid is now closest to src. 42
[Mon Dec 26 20:27:08 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 20:27:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 20:27:08 2011] Assessing source extent using major
[Mon Dec 26 20:27:08 2011] Source does appear to be extended
[Mon Dec 26 20:27:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 23:26:21 2011] XMMSAS src. selection expression = ellipse(28704.928314, 28659.450317, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Dec 27 23:26:21 2011] Writing source region out to fullrun_mos1_xmm0503220101_pi300-10000_pass1_cl_src32_src.reg
[Tue Dec 27 23:26:21 2011] Extracting stamp from image fullrun_mos1_xmm0503220101_pi300-10000_cl_sm2.00.img.gz, (293, 292) - (368, 367)
[Tue Dec 27 23:26:21 2011] XMMSAS bgd. selection expression = annulus(28704.928314, 28659.450317, 1087.500000, 2175.000000, X, Y) && !ellipse(25455.163400, 31909.142000, 2353.520068, 2353.520068, 0.000000, X, Y) && !ellipse(25056.516747, 32627.058693, 2906.976084, 2100.783169, 72.413214, X, Y) && !ellipse(27212.476000, 29586.312000, 1086.784031, 1086.784031, 0.000000, X, Y) && !ellipse(28177.608000, 29867.246000, 1902.208055, 1902.208055, 0.000000, X, Y) && !ellipse(30814.516000, 27148.702000, 1324.400038, 1324.400038, 0.000000, X, Y) && !ellipse(25576.408000, 29772.612000, 1304.160038, 1304.160038, 0.000000, X, Y) && !ellipse(31668.076000, 25910.690000, 1398.408040, 1398.408040, 0.000000, X, Y) && !ellipse(26378.498718, 30316.881561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27951.662000, 29507.903000, 2173.568063, 2173.568063, 0.000000, X, Y) && !ellipse(26308.692000, 31145.554000, 1361.816039, 661.765619, 204.378000, X, Y) && !ellipse(30110.630000, 27670.836000, 1343.496039, 1343.496039, 0.000000, X, Y) && !ellipse(30324.246000, 27560.630000, 2790.576080, 2790.576080, 0.000000, X, Y) && !ellipse(29131.216600, 29641.724200, 748.295222, 748.295222, 0.000000, X, Y) && !ellipse(26561.507233, 29599.991791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27156.852000, 30695.200000, 2727.888078, 2727.888078, 0.000000, X, Y) && !ellipse(32273.138000, 25802.552000, 2544.048073, 1774.104051, 29.649000, X, Y) && !ellipse(28006.300000, 30067.528000, 1363.944039, 1363.944039, 0.000000, X, Y) && !ellipse(29293.530000, 28882.684000, 1320.584038, 1320.584038, 0.000000, X, Y) && !ellipse(31296.208000, 26726.978000, 2867.968083, 2867.968083, 0.000000, X, Y) && !ellipse(29971.948000, 27481.242000, 1316.520038, 1316.520038, 0.000000, X, Y) && !ellipse(29621.655980, 28881.384000, 1327.384038, 1327.384038, 0.000000, X, Y) && !ellipse(25767.690643, 30310.597107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29658.550000, 28311.238000, 2686.832077, 2686.832077, 0.000000, X, Y) && !ellipse(30813.644000, 26611.888000, 2631.776076, 2631.776076, 0.000000, X, Y) && !ellipse(33409.006000, 24998.958000, 2987.504086, 2987.504086, 0.000000, X, Y) && !ellipse(28190.940000, 29228.478000, 1289.424037, 1289.424037, 0.000000, X, Y) && !ellipse(29652.298000, 25867.212000, 1307.992038, 1307.992038, 0.000000, X, Y) && !ellipse(30268.186000, 25144.450000, 1364.720039, 1364.720039, 0.000000, X, Y)
[Tue Dec 27 23:26:21 2011] Writing fullrun_mos1_xmm0503220101_pi300-10000_pass1_cl_src32.gif
[Wed Dec 28 03:05:05 2011] Mean detx,y = (-155.31, 2373.99) 
[Wed Dec 28 03:05:10 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 03:05:49 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 03:05:50 2011] Setting source spectrum file to fullrun_mos1_xmm0503220101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Dec 28 03:05:50 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0503220101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Fri Dec 30 19:00:49 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 30 19:00:49 2011] rmf not generated due to insufficient counts
[Sat Dec 31 07:06:04 2011] Updating aperture counts using extracted products
[Sat Dec 31 07:06:04 2011] Error reading totcts from fullrun_mos1_xmm0503220101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sat Dec 31 07:06:07 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 07:06:07 2011] Using photon index=1.80, rate=0.0117, arf fullrun_mos1_xmm0503220101_pi300-10000_pass1_cl_src32.arf
[Sat Dec 31 07:06:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 07:06:07 2011] Updating source flux to 1.2e-13
[Sat Dec 31 07:06:16 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting