[Sat Dec 24 10:45:55 2011] Detection parameters:
  Position = (359.2, 310.0) = 11 50 32.79 -62 21 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 431.1 +/- 32.1
  Background counts = 134.4
  Rate = 0.03 +/- 0.002

[Sat Dec 24 10:45:57 2011] Off-axis axis estimate = 4.49'
[Sat Dec 24 18:32:09 2011] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 18:32:09 2011] Initial guess for spatial extent in simple fitting = 8.67"
[Sat Dec 24 18:32:09 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.005
[Sat Dec 24 18:32:09 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 8.67"
[Sat Dec 24 23:36:05 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Dec 24 23:36:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_src11.csv
[Sat Dec 24 23:36:05 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Dec 24 23:36:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_src11.csv
[Sat Dec 24 23:36:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 23:36:07 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Dec 24 23:36:07 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Dec 24 23:36:07 2011] Fit fullrun_mos1_xmm0503220101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Dec 25 09:37:08 2011] Spatial fit model total counts = 1857.180000, observed total counts = 1858.000000
[Sun Dec 25 09:37:08 2011] Offset between fit and detection position for source 15 = 3.840540 pixels
[Sun Dec 25 09:37:08 2011] 1785.001000 total counts/ 1227.150000 bgd. counts: snr = 15.924631
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 3.840540 pixels
  Position = (356.4, 312.6) = 11 50 34.57 -62 21 5.4
  Extent = 17.3 (17.3-34.7)", rotation angle = 0
  Source counts = 557.9 +/- 42.2
  Background counts = 1227.2
  Rate = 0.04 +/- 0.003
[Sun Dec 25 09:37:08 2011] Spatial fit model total counts = 1773.080000, observed total counts = 1769.000000
[Sun Dec 25 09:37:08 2011] Offset between fit and detection position for source 15 = 2.462009 pixels
[Sun Dec 25 09:37:08 2011] Warning, changing simple spatial fit ID from 11 to 14
[Sun Dec 25 09:37:08 2011] 1792.410000 total counts/ 1481.970000 bgd. counts: snr = 8.064138
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 2.462009 pixels
  Position = (357.6, 310.5) = 11 50 33.81 -62 21 14.7
  Extent = 17.4 (17.4-17.5)", rotation angle = 0
  Source counts = 310.4 +/- 42.3
  Background counts = 1482.0
  Rate = 0.02 +/- 0.003
[Sun Dec 25 09:37:08 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 09:37:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 09:37:08 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 09:37:08 2011] Source does appear to be extended
[Sun Dec 25 09:37:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 09:37:08 2011] Source is confused with source 14
[Sun Dec 25 09:37:08 2011] Source is confused with source 34
[Sun Dec 25 09:37:08 2011] Source is confused with source 37
[Sun Dec 25 09:37:08 2011] Source is confused with source 38
[Sun Dec 25 20:06:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 20:06:29 2011] Initial guess for spatial extent in simple fitting = 17.44"
[Sun Dec 25 20:06:29 2011] source mask rpix=4.0, npix_max = 81, mask sum = 81, frac = 0.996
[Sun Dec 25 20:06:29 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 17.44"
[Mon Dec 26 05:27:15 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_src10.ximg exists
[Mon Dec 26 05:27:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_src10.csv
[Mon Dec 26 05:27:15 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Dec 26 05:27:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_src10.csv
[Mon Dec 26 05:27:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 05:27:17 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Dec 26 05:27:17 2011] fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Dec 26 05:27:17 2011] Fit fullrun_mos1_xmm0503220101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Mon Dec 26 20:27:07 2011] Warning, spatial fit 10 centroid is now closest to src. 34
[Mon Dec 26 20:27:08 2011] Spatial fit model total counts = 3398.380000, observed total counts = 3386.000000
[Mon Dec 26 20:27:08 2011] Offset between fit and detection position for source 15 = 3.171737 pixels
[Mon Dec 26 20:27:08 2011] Warning, changing simple spatial fit ID from 10 to 18
[Mon Dec 26 20:27:08 2011] 3157.540000 total counts/ 1203.820000 bgd. counts: snr = 56.309484
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 3.171737 pixels
  Position = (354.4, 310.7) = 11 50 35.79 -62 21 13.7
  Extent = 33.6 (33.5-67.2)", rotation angle = 0
  Source counts = 1953.7 +/- 56.2
  Background counts = 1203.8
  Rate = 0.2 +/- 0.004
[Mon Dec 26 20:27:08 2011] Spatial fit model total counts = 1250.820000, observed total counts = 1251.000000
[Mon Dec 26 20:27:08 2011] Offset between fit and detection position for source 15 = 1.939891 pixels
[Mon Dec 26 20:27:08 2011] Warning, changing simple spatial fit ID from 18 to 36
[Mon Dec 26 20:27:08 2011] 1290.360900 total counts/ 1194.720000 bgd. counts: snr = 2.767009
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.939891 pixels
  Position = (354.7, 312.6) = 11 50 35.60 -62 21 5.4
  Extent = 16.6 (16.5-33.1)", rotation angle = 0
  Source counts = 95.6 +/- 35.9
  Background counts = 1194.7
  Rate = 0.007 +/- 0.003
[Mon Dec 26 20:27:08 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 20:27:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 20:27:08 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 20:27:08 2011] Source does appear to be extended
[Mon Dec 26 20:27:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 23:26:20 2011] XMMSAS src. selection expression = ellipse(30814.516000, 27148.702000, 993.300029, 993.300029, 0.000000, X, Y)
[Tue Dec 27 23:26:20 2011] Writing source region out to fullrun_mos1_xmm0503220101_pi300-10000_pass1_cl_src15_src.reg
[Tue Dec 27 23:26:20 2011] Extracting stamp from image fullrun_mos1_xmm0503220101_pi300-10000_cl_sm2.00.img.gz, (298, 256) - (412, 370)
[Tue Dec 27 23:26:20 2011] XMMSAS bgd. selection expression = annulus(30814.516000, 27148.702000, 1655.500048, 3311.000095, X, Y) && !ellipse(25455.163400, 31909.142000, 2353.520068, 2353.520068, 0.000000, X, Y) && !ellipse(25056.516747, 32627.058693, 2906.976084, 2100.783169, 72.413214, X, Y) && !ellipse(27212.476000, 29586.312000, 1086.784031, 1086.784031, 0.000000, X, Y) && !ellipse(28177.608000, 29867.246000, 1902.208055, 1902.208055, 0.000000, X, Y) && !ellipse(31668.076000, 25910.690000, 1398.408040, 1398.408040, 0.000000, X, Y) && !ellipse(27951.662000, 29507.903000, 2173.568063, 2173.568063, 0.000000, X, Y) && !ellipse(26308.692000, 31145.554000, 1361.816039, 661.765619, 204.378000, X, Y) && !ellipse(30110.630000, 27670.836000, 1343.496039, 1343.496039, 0.000000, X, Y) && !ellipse(30324.246000, 27560.630000, 2790.576080, 2790.576080, 0.000000, X, Y) && !ellipse(29131.216600, 29641.724200, 748.295222, 748.295222, 0.000000, X, Y) && !ellipse(27156.852000, 30695.200000, 2727.888078, 2727.888078, 0.000000, X, Y) && !ellipse(32273.138000, 25802.552000, 2544.048073, 1774.104051, 29.649000, X, Y) && !ellipse(28006.300000, 30067.528000, 1363.944039, 1363.944039, 0.000000, X, Y) && !ellipse(29293.530000, 28882.684000, 1320.584038, 1320.584038, 0.000000, X, Y) && !ellipse(31296.208000, 26726.978000, 2867.968083, 2867.968083, 0.000000, X, Y) && !ellipse(32418.146000, 26182.900000, 1433.984041, 1433.984041, 0.000000, X, Y) && !ellipse(29971.948000, 27481.242000, 1316.520038, 1316.520038, 0.000000, X, Y) && !ellipse(29621.655980, 28881.384000, 1327.384038, 1327.384038, 0.000000, X, Y) && !ellipse(32778.203145, 25285.618986, 1277.952037, 1266.092211, 88.423837, X, Y) && !ellipse(29658.550000, 28311.238000, 2686.832077, 2686.832077, 0.000000, X, Y) && !ellipse(28704.928314, 28659.450317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30813.644000, 26611.888000, 2631.776076, 2631.776076, 0.000000, X, Y) && !ellipse(33409.006000, 24998.958000, 2987.504086, 2987.504086, 0.000000, X, Y) && !ellipse(28190.940000, 29228.478000, 1289.424037, 1289.424037, 0.000000, X, Y) && !ellipse(29652.298000, 25867.212000, 1307.992038, 1307.992038, 0.000000, X, Y) && !ellipse(30268.186000, 25144.450000, 1364.720039, 1364.720039, 0.000000, X, Y) && !ellipse(33407.784363, 25856.671295, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Dec 27 23:26:20 2011] Writing fullrun_mos1_xmm0503220101_pi300-10000_pass1_cl_src15.gif
[Wed Dec 28 00:37:05 2011] Mean detx,y = (-2463.62, 3550.66) 
[Wed Dec 28 00:37:09 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 00:38:01 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 00:38:01 2011] Setting source spectrum file to fullrun_mos1_xmm0503220101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Dec 28 00:38:01 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0503220101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed Dec 28 06:17:35 2011] Not generating rmf since there are only 95 counts
[Wed Dec 28 06:17:35 2011] rmf not generated due to insufficient counts
[Sat Dec 31 07:06:03 2011] Updating aperture counts using extracted products
[Sat Dec 31 07:06:03 2011] Error reading totcts from fullrun_mos1_xmm0503220101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Dec 31 07:06:05 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 07:06:05 2011] Using photon index=1.80, rate=0.00747, arf fullrun_mos1_xmm0503220101_pi300-10000_pass1_cl_src15.arf
[Sat Dec 31 07:06:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 07:06:05 2011] Updating source flux to 7.7e-14
[Sat Dec 31 07:06:16 2011] Flag c found in src. 15 procflags, skipping spectral fitting
[Sat Dec 31 07:06:16 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting