[Thu Mar  8 00:54:58 2012] Detection parameters:
  Position = (321.3, 346.8) = 18 3 59.18 -21 35 57.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.7 +/- 17.4
  Background counts = 78.9
  Rate = 0.006 +/- 0.0009

[Thu Mar  8 00:54:58 2012] Off-axis axis estimate = 3.88'
[Thu Mar  8 00:58:45 2012] Using EEF radius (= 8.37 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:58:45 2012] Initial guess for spatial extent in simple fitting = 8.37"
[Thu Mar  8 00:58:45 2012] source mask rpix=1.9, npix_max = 23, mask sum = 15, frac = 0.638
[Thu Mar  8 00:58:45 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 8.37"
[Thu Mar  8 09:35:04 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src79.ximg exists
[Thu Mar  8 09:35:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src79.csv
[Thu Mar  8 09:35:04 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src79_1.ximg exists
[Thu Mar  8 09:35:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src79.csv
[Thu Mar  8 09:35:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 09:35:07 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Thu Mar  8 09:35:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src79.csv
[Thu Mar  8 09:35:07 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Thu Mar  8 09:35:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src79.csv
[Thu Mar  8 09:35:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:53:05 2012] Warning, spatial fit 79 centroid is now closest to src. 77
[Thu Mar  8 19:53:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:05 2012] Assessing source extent using major
[Thu Mar  8 19:53:05 2012] Source does appear to be extended
[Thu Mar  8 19:53:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:05 2012] Source is confused with source 83
[Thu Mar  8 19:54:10 2012] Using EEF radius (= 8.37 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 19:54:10 2012] Initial guess for spatial extent in simple fitting = 8.37"
[Thu Mar  8 19:54:10 2012] source mask rpix=1.9, npix_max = 23, mask sum = 15, frac = 0.638
[Thu Mar  8 19:54:10 2012] Giving source the simple spatial ID 78 for pass 1, mean size = 8.37"
[Fri Mar  9 08:39:46 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src78.ximg exists
[Fri Mar  9 08:39:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src78.csv
[Fri Mar  9 08:39:46 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src78_1.ximg exists
[Fri Mar  9 08:39:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src78.csv
[Fri Mar  9 08:39:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 08:39:49 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Fri Mar  9 08:39:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src78.csv
[Fri Mar  9 08:39:49 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Fri Mar  9 08:39:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src78.csv
[Fri Mar  9 08:39:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:36:32 2012] Spatial fit model total counts = 1129.660000, observed total counts = 877.000000
[Fri Mar  9 19:36:32 2012] Poor agreement between spatial fit and data for source 80
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar  9 19:36:32 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:32 2012] Assessing source extent using major
[Fri Mar  9 19:36:32 2012] Source does appear to be extended
[Fri Mar  9 19:36:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:37:53 2012] XMMSAS src. selection expression = ellipse(27906.037964, 30120.685516, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar  9 19:37:53 2012] Writing source region out to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src80_src.reg
[Fri Mar  9 19:37:53 2012] Extracting stamp from image fullrun_pn_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (284, 309) - (359, 384)
[Fri Mar  9 19:37:53 2012] XMMSAS bgd. selection expression = annulus(27906.037964, 30120.685516, 1087.500000, 2175.000000, X, Y) && !ellipse(26608.580902, 32666.747101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28446.256775, 32487.691925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26932.106000, 32292.712000, 1480.984043, 1480.984043, 0.000000, X, Y) && !ellipse(29011.962000, 32173.264000, 1174.712034, 1174.712034, 0.000000, X, Y) && !ellipse(25572.724000, 31760.604000, 1673.456048, 1673.456048, 0.000000, X, Y) && !ellipse(28152.111389, 31701.789978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25901.233400, 31582.676200, 1409.736041, 264.696008, 38.391700, X, Y) && !ellipse(29398.898000, 31943.256000, 522.820015, 522.820015, 0.000000, X, Y) && !ellipse(28930.016388, 31256.477844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26177.278598, 31363.328760, 1387.888040, 285.568116, 216.988973, X, Y) && !ellipse(31163.021265, 30985.865988, 1437.440041, 389.565616, 30.652756, X, Y) && !ellipse(29539.255341, 30917.279266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30747.646790, 30369.575928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27047.266083, 30765.414246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28660.882170, 29773.102310, 1451.904042, 181.488005, 29.541501, X, Y) && !ellipse(28512.552000, 29826.030000, 1346.536039, 1346.536039, 0.000000, X, Y) && !ellipse(29594.023285, 29172.205505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30562.795685, 28774.166168, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 19:37:53 2012] Writing fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src80.gif
[Fri Mar  9 20:49:18 2012] Mean detx,y = (968.35, -2740.50) 
[Fri Mar  9 20:49:21 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 20:49:43 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 20:49:44 2012] Setting source spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Fri Mar  9 20:49:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Fri Mar  9 23:12:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar  9 23:12:05 2012] rmf not generated due to insufficient counts
[Sat Mar 10 04:28:28 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:28 2012] Error reading totcts from fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Sat Mar 10 04:28:32 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:32 2012] Using photon index=1.80, rate=0.00648, arf fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src80.arf
[Sat Mar 10 04:28:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:32 2012] Updating source flux to 2.3e-14
[Sat Mar 10 04:43:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting