[Thu Mar  8 00:54:58 2012] Detection parameters:
  Position = (340.1, 355.9) = 18 3 53.33 -21 35 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.8 +/- 20.1
  Background counts = 76.6
  Rate = 0.007 +/- 0.0009

[Thu Mar  8 00:54:58 2012] Off-axis axis estimate = 5.15'
[Thu Mar  8 00:58:45 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:58:45 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Thu Mar  8 00:58:45 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.947
[Thu Mar  8 00:58:45 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 9.00"
[Thu Mar  8 09:35:04 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src73.ximg exists
[Thu Mar  8 09:35:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src73.csv
[Thu Mar  8 09:35:04 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src73_1.ximg exists
[Thu Mar  8 09:35:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src73.csv
[Thu Mar  8 09:35:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 09:35:07 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Thu Mar  8 09:35:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src73.csv
[Thu Mar  8 09:35:07 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Thu Mar  8 09:35:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src73.csv
[Thu Mar  8 09:35:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:53:05 2012] Warning, spatial fit 73 centroid is now closest to src. 70
[Thu Mar  8 19:53:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:05 2012] Assessing source extent using major
[Thu Mar  8 19:53:05 2012] Source does appear to be extended
[Thu Mar  8 19:53:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:54:10 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 19:54:10 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Thu Mar  8 19:54:10 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.947
[Thu Mar  8 19:54:10 2012] Giving source the simple spatial ID 72 for pass 1, mean size = 9.00"
[Fri Mar  9 08:39:46 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src72.ximg exists
[Fri Mar  9 08:39:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src72.csv
[Fri Mar  9 08:39:46 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src72_1.ximg exists
[Fri Mar  9 08:39:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src72.csv
[Fri Mar  9 08:39:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 08:39:48 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Fri Mar  9 08:39:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src72.csv
[Fri Mar  9 08:39:48 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Fri Mar  9 08:39:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src72.csv
[Fri Mar  9 08:39:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:36:32 2012] Warning, spatial fit 72 centroid is now closest to src. 68
[Fri Mar  9 19:36:32 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:32 2012] Assessing source extent using major
[Fri Mar  9 19:36:32 2012] Source does appear to be extended
[Fri Mar  9 19:36:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:37:52 2012] XMMSAS src. selection expression = ellipse(29539.255341, 30917.279266, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar  9 19:37:52 2012] Writing source region out to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src74_src.reg
[Fri Mar  9 19:37:52 2012] Extracting stamp from image fullrun_pn_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (303, 318) - (378, 393)
[Fri Mar  9 19:37:52 2012] XMMSAS bgd. selection expression = annulus(29539.255341, 30917.279266, 1087.500000, 2175.000000, X, Y) && !ellipse(25873.026000, 34334.764000, 1559.632045, 1559.632045, 0.000000, X, Y) && !ellipse(27137.160000, 33411.598000, 548.616016, 548.616016, 0.000000, X, Y) && !ellipse(26608.580902, 32666.747101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28446.256775, 32487.691925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26932.106000, 32292.712000, 1480.984043, 1480.984043, 0.000000, X, Y) && !ellipse(29011.962000, 32173.264000, 1174.712034, 1174.712034, 0.000000, X, Y) && !ellipse(28152.111389, 31701.789978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29398.898000, 31943.256000, 522.820015, 522.820015, 0.000000, X, Y) && !ellipse(28930.016388, 31256.477844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26177.278598, 31363.328760, 1387.888040, 285.568116, 216.988973, X, Y) && !ellipse(31163.021265, 30985.865988, 1437.440041, 389.565616, 30.652756, X, Y) && !ellipse(32044.038780, 30595.099000, 1543.704044, 372.309611, 23.395000, X, Y) && !ellipse(32181.460000, 30536.321200, 702.853620, 702.853620, 0.000000, X, Y) && !ellipse(30747.646790, 30369.575928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27047.266083, 30765.414246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31189.451630, 30129.295776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27906.037964, 30120.685516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31607.506600, 29964.449000, 1501.184043, 276.616008, 21.140000, X, Y) && !ellipse(28660.882170, 29773.102310, 1451.904042, 181.488005, 29.541501, X, Y) && !ellipse(32288.104000, 29686.846000, 1341.112039, 261.793608, 24.953000, X, Y) && !ellipse(28512.552000, 29826.030000, 1346.536039, 1346.536039, 0.000000, X, Y) && !ellipse(29594.023285, 29172.205505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30562.795685, 28774.166168, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 19:37:52 2012] Writing fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src74.gif
[Fri Mar  9 20:46:25 2012] Mean detx,y = (2456.33, -3551.18) 
[Fri Mar  9 20:46:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 20:46:46 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 20:46:46 2012] Setting source spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Fri Mar  9 20:46:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Fri Mar  9 23:07:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar  9 23:07:54 2012] rmf not generated due to insufficient counts
[Sat Mar 10 04:28:27 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:28 2012] Error reading totcts from fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Sat Mar 10 04:28:32 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:32 2012] Using photon index=1.80, rate=0.00702, arf fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src74.arf
[Sat Mar 10 04:28:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:32 2012] Updating source flux to 2.2e-14
[Sat Mar 10 04:43:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting