[Thu Mar  8 00:54:57 2012] Detection parameters:
  Position = (340.2, 366.1) = 18 3 53.29 -21 34 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 245.6 +/- 22.9
  Background counts = 70.4
  Rate = 0.01 +/- 0.001

[Thu Mar  8 00:54:58 2012] Off-axis axis estimate = 5.77'
[Thu Mar  8 00:58:45 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:58:45 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Thu Mar  8 00:58:45 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.896
[Thu Mar  8 00:58:45 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 9.31"
[Thu Mar  8 09:35:04 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src66.ximg exists
[Thu Mar  8 09:35:04 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src66_1.ximg exists
[Thu Mar  8 09:35:04 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src66 appears to have run properly
[Thu Mar  8 09:35:06 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Thu Mar  8 09:35:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src66.csv
[Thu Mar  8 09:35:06 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Thu Mar  8 09:35:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src66.csv
[Thu Mar  8 09:35:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:53:05 2012] Warning: source 66 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 67 at 12.592043 pixels away
[Thu Mar  8 19:53:05 2012] Spatial fit model total counts = 1196.790000, observed total counts = 1199.000000
[Thu Mar  8 19:53:05 2012] Offset between fit and detection position for source 67 = 2.362198 pixels
[Thu Mar  8 19:53:05 2012] Warning, changing simple spatial fit ID from 66 to 67
[Thu Mar  8 19:53:05 2012] 1120.196000 total counts/ 1009.080000 bgd. counts: snr = 3.497952
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 2.362198 pixels
  Position = (338.6, 367.9) = 18 3 53.80 -21 34 29.7
  Extent = 7.3 (4.2-10.3)", rotation angle = 0
  Source counts = 111.1 +/- 33.5
  Background counts = 1009.1
  Rate = 0.004 +/- 0.001
[Thu Mar  8 19:53:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:05 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 19:53:05 2012] Source does appear to be extended
[Thu Mar  8 19:53:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:05 2012] Source is confused with source 63
[Thu Mar  8 19:54:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 19:54:10 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Thu Mar  8 19:54:10 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.045
[Thu Mar  8 19:54:10 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 7.34"
[Fri Mar  9 08:39:45 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src65.ximg exists
[Fri Mar  9 08:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src65.csv
[Fri Mar  9 08:39:45 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src65_1.ximg exists
[Fri Mar  9 08:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src65.csv
[Fri Mar  9 08:39:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 08:39:48 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Fri Mar  9 08:39:48 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Fri Mar  9 08:39:48 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Fri Mar  9 19:36:32 2012] Warning, spatial fit 65 centroid is now closest to src. 63
[Fri Mar  9 19:36:32 2012] Spatial fit model total counts = 1198.800000, observed total counts = 1199.000000
[Fri Mar  9 19:36:32 2012] Offset between fit and detection position for source 67 = 0.182354 pixels
[Fri Mar  9 19:36:32 2012] Warning, changing simple spatial fit ID from 65 to 66
[Fri Mar  9 19:36:32 2012] 1198.693400 total counts/ 1101.280000 bgd. counts: snr = 2.935417
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 0.182354 pixels
  Position = (338.5, 367.7) = 18 3 53.83 -21 34 30.3
  Extent = 6.5 (3.6-10.2)", rotation angle = 0
  Source counts = 97.4 +/- 34.6
  Background counts = 1101.3
  Rate = 0.003 +/- 0.001
[Fri Mar  9 19:36:32 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:32 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:36:32 2012] Source does appear to be extended
[Fri Mar  9 19:36:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:37:52 2012] XMMSAS src. selection expression = ellipse(29398.898000, 31943.256000, 392.115011, 392.115011, 0.000000, X, Y)
[Fri Mar  9 19:37:52 2012] Writing source region out to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src67_src.reg
[Fri Mar  9 19:37:52 2012] Extracting stamp from image fullrun_pn_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (316, 345) - (361, 390)
[Fri Mar  9 19:37:52 2012] XMMSAS bgd. selection expression = annulus(29398.898000, 31943.256000, 653.525019, 1307.050038, X, Y) && !ellipse(28446.256775, 32487.691925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26932.106000, 32292.712000, 1480.984043, 1480.984043, 0.000000, X, Y) && !ellipse(29011.962000, 32173.264000, 1174.712034, 1174.712034, 0.000000, X, Y) && !ellipse(28152.111389, 31701.789978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28930.016388, 31256.477844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31163.021265, 30985.865988, 1437.440041, 389.565616, 30.652756, X, Y) && !ellipse(32044.038780, 30595.099000, 1543.704044, 372.309611, 23.395000, X, Y) && !ellipse(29539.255341, 30917.279266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30747.646790, 30369.575928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31189.451630, 30129.295776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27906.037964, 30120.685516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31607.506600, 29964.449000, 1501.184043, 276.616008, 21.140000, X, Y) && !ellipse(28660.882170, 29773.102310, 1451.904042, 181.488005, 29.541501, X, Y) && !ellipse(28512.552000, 29826.030000, 1346.536039, 1346.536039, 0.000000, X, Y)
[Fri Mar  9 19:37:52 2012] Writing fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src67.gif
[Fri Mar  9 20:41:36 2012] Mean detx,y = (2346.23, -4567.00) 
[Fri Mar  9 20:41:39 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 20:42:01 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 20:42:01 2012] Setting source spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Fri Mar  9 20:42:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Fri Mar  9 22:58:33 2012] Not generating rmf since there are only 97 counts
[Fri Mar  9 22:58:33 2012] rmf not generated due to insufficient counts
[Sat Mar 10 04:28:27 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:27 2012] Error reading totcts from fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Sat Mar 10 04:28:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:31 2012] Using photon index=1.80, rate=0.00334, arf fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src67.arf
[Sat Mar 10 04:28:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:31 2012] Updating source flux to 1.2e-14
[Sat Mar 10 04:43:09 2012] Flag c found in src. 67 procflags, skipping spectral fitting
[Sat Mar 10 04:43:09 2012] Source 67 has fewer than 100.000000 counts, skipping spectral fitting