[Thu Mar  8 00:54:57 2012] Detection parameters:
  Position = (292.0, 368.7) = 18 4 8.33 -21 34 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.0 +/- 18.0
  Background counts = 72.7
  Rate = 0.006 +/- 0.0009

[Thu Mar  8 00:54:58 2012] Off-axis axis estimate = 5.11'
[Thu Mar  8 00:58:45 2012] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:58:45 2012] Initial guess for spatial extent in simple fitting = 8.98"
[Thu Mar  8 00:58:45 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.140
[Thu Mar  8 00:58:45 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 8.98"
[Thu Mar  8 09:35:04 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src63.ximg exists
[Thu Mar  8 09:35:04 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src63_1.ximg exists
[Thu Mar  8 09:35:04 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src63 appears to have run properly
[Thu Mar  8 09:35:06 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Thu Mar  8 09:35:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src63.csv
[Thu Mar  8 09:35:06 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Thu Mar  8 09:35:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src63.csv
[Thu Mar  8 09:35:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:53:05 2012] Warning: source 63 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 64 at 10.115259 pixels away
[Thu Mar  8 19:53:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:05 2012] Assessing source extent using major
[Thu Mar  8 19:53:05 2012] Source does appear to be extended
[Thu Mar  8 19:53:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:05 2012] Source is confused with source 66
[Thu Mar  8 19:54:10 2012] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 19:54:10 2012] Initial guess for spatial extent in simple fitting = 8.98"
[Thu Mar  8 19:54:10 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.140
[Thu Mar  8 19:54:10 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 8.98"
[Fri Mar  9 08:39:45 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src62.ximg exists
[Fri Mar  9 08:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src62.csv
[Fri Mar  9 08:39:45 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src62_1.ximg exists
[Fri Mar  9 08:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src62.csv
[Fri Mar  9 08:39:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 08:39:48 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Fri Mar  9 08:39:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src62.csv
[Fri Mar  9 08:39:48 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Fri Mar  9 08:39:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src62.csv
[Fri Mar  9 08:39:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:36:32 2012] Source 64 is offset by -2.579790 and 2.084183 pixels which is larger than
2 X fitted extent = 1.400184 x 8.261931, not incorporating fit results
[Fri Mar  9 19:36:32 2012] Spatial fit model total counts = 993.460000, observed total counts = 991.000000
[Fri Mar  9 19:36:32 2012] Offset between fit and detection position for source 64 = 3.940121 pixels
[Fri Mar  9 19:36:32 2012] Warning, changing simple spatial fit ID from 62 to 67
[Fri Mar  9 19:36:32 2012] 994.392000 total counts/ 512.298000 bgd. counts: snr = 21.299548
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 3.940121 pixels
  Position = (294.5, 365.6) = 18 4 7.55 -21 34 39.4
  Extent = 20.9 (20.9-41.8)", rotation angle = 0
  Source counts = 482.1 +/- 31.5
  Background counts = 512.3
  Rate = 0.02 +/- 0.001
[Fri Mar  9 19:36:32 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:32 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:36:32 2012] Source does appear to be extended
[Fri Mar  9 19:36:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:37:52 2012] XMMSAS src. selection expression = ellipse(25572.724000, 31760.604000, 1255.092036, 1255.092036, 0.000000, X, Y)
[Fri Mar  9 19:37:52 2012] Writing source region out to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src64_src.reg
[Fri Mar  9 19:37:52 2012] Extracting stamp from image fullrun_pn_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (222, 293) - (367, 438)
[Fri Mar  9 19:37:52 2012] XMMSAS bgd. selection expression = annulus(25572.724000, 31760.604000, 2091.820060, 4183.640120, X, Y) && !ellipse(22737.804000, 37188.990000, 1850.864053, 1850.864053, 0.000000, X, Y) && !ellipse(20219.122640, 36762.032140, 1836.968053, 417.407212, 49.344000, X, Y) && !ellipse(26494.596000, 36224.198800, 602.534417, 602.534417, 0.000000, X, Y) && !ellipse(22405.110600, 36119.491000, 832.400024, 832.400024, 0.000000, X, Y) && !ellipse(23415.316000, 36450.816400, 1740.256050, 425.669612, 45.755300, X, Y) && !ellipse(21481.658264, 35448.811584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23185.406180, 35460.872200, 1689.648049, 273.804808, 41.645000, X, Y) && !ellipse(23548.898000, 35028.294000, 1689.648049, 1689.648049, 0.000000, X, Y) && !ellipse(25468.278000, 34649.876000, 1586.448046, 1586.448046, 0.000000, X, Y) && !ellipse(22100.872000, 34727.526000, 1628.616047, 1628.616047, 0.000000, X, Y) && !ellipse(25873.026000, 34334.764000, 1559.632045, 1559.632045, 0.000000, X, Y) && !ellipse(22667.845020, 34221.996200, 914.048026, 914.048026, 0.000000, X, Y) && !ellipse(26419.322449, 33865.514069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25198.378021, 33677.259216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26041.720800, 33136.238400, 594.840817, 594.840817, 0.000000, X, Y) && !ellipse(27137.160000, 33411.598000, 548.616016, 548.616016, 0.000000, X, Y) && !ellipse(26608.580902, 32666.747101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28446.256775, 32487.691925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26932.106000, 32292.712000, 1480.984043, 1480.984043, 0.000000, X, Y) && !ellipse(29011.962000, 32173.264000, 1174.712034, 1174.712034, 0.000000, X, Y) && !ellipse(28152.111389, 31701.789978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25901.233400, 31582.676200, 1409.736041, 264.696008, 38.391700, X, Y) && !ellipse(29398.898000, 31943.256000, 522.820015, 522.820015, 0.000000, X, Y) && !ellipse(28930.016388, 31256.477844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26177.278598, 31363.328760, 1387.888040, 285.568116, 216.988973, X, Y) && !ellipse(31163.021265, 30985.865988, 1437.440041, 389.565616, 30.652756, X, Y) && !ellipse(29539.255341, 30917.279266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27047.266083, 30765.414246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27906.037964, 30120.685516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28660.882170, 29773.102310, 1451.904042, 181.488005, 29.541501, X, Y) && !ellipse(28512.552000, 29826.030000, 1346.536039, 1346.536039, 0.000000, X, Y) && !ellipse(29594.023285, 29172.205505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30562.795685, 28774.166168, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 19:37:52 2012] Writing fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src64.gif
[Fri Mar  9 20:39:01 2012] Mean detx,y = (-1259.01, -4333.74) 
[Fri Mar  9 20:39:05 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 20:39:51 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 20:39:51 2012] Setting source spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Fri Mar  9 20:39:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Sat Mar 10 04:28:27 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:27 2012] Error reading totcts from fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Sat Mar 10 04:28:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:31 2012] Using photon index=1.80, rate=0.0165, arf fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src64.arf
[Sat Mar 10 04:28:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:31 2012] Updating source flux to 5.2e-14
[Sat Mar 10 04:43:09 2012] Flag b found in src. 64 procflags, skipping spectral fitting
[Sat Mar 10 04:43:09 2012] Flag c found in src. 64 procflags, skipping spectral fitting