[Thu Mar  8 00:54:57 2012] Detection parameters:
  Position = (335.4, 369.1) = 18 3 54.78 -21 34 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 207.0 +/- 22.0
  Background counts = 69.7
  Rate = 0.01 +/- 0.001

[Thu Mar  8 00:54:58 2012] Off-axis axis estimate = 5.78'
[Thu Mar  8 00:58:45 2012] Using EEF radius (= 9.32 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:58:45 2012] Initial guess for spatial extent in simple fitting = 9.32"
[Thu Mar  8 00:58:45 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.074
[Thu Mar  8 00:58:45 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 9.32"
[Thu Mar  8 09:35:04 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src62.ximg exists
[Thu Mar  8 09:35:04 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src62_1.ximg exists
[Thu Mar  8 09:35:04 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src62 appears to have run properly
[Thu Mar  8 09:35:06 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Thu Mar  8 09:35:06 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Thu Mar  8 09:35:06 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Thu Mar  8 19:53:05 2012] Spatial fit model total counts = 1250.950000, observed total counts = 1244.000000
[Thu Mar  8 19:53:05 2012] Offset between fit and detection position for source 63 = 1.030278 pixels
[Thu Mar  8 19:53:05 2012] 1093.921000 total counts/ 655.725000 bgd. counts: snr = 17.112267
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 1.030278 pixels
  Position = (334.5, 369.6) = 18 3 55.06 -21 34 22.1
  Extent = 18.6 (18.3-37.3)" x 3.9 (3.5-4.5)", rotation angle = 31 (30-33) degrees
  Source counts = 438.2 +/- 33.1
  Background counts = 655.7
  Rate = 0.02 +/- 0.001
[Thu Mar  8 19:53:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:05 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 19:53:05 2012] Source does appear to be extended
[Thu Mar  8 19:53:05 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.09
[Thu Mar  8 19:53:05 2012] Source is asymmetric
[Thu Mar  8 19:53:05 2012] Source is confused with source 61
[Thu Mar  8 19:54:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 19:54:10 2012] Initial guess for spatial extent in simple fitting = 11.29"
[Thu Mar  8 19:54:10 2012] source mask rpix=2.6, npix_max = 38, mask sum = 49, frac = 1.279
[Thu Mar  8 19:54:10 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 11.29"
[Fri Mar  9 08:39:45 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src61.ximg exists
[Fri Mar  9 08:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src61.csv
[Fri Mar  9 08:39:45 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src61_1.ximg exists
[Fri Mar  9 08:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src61.csv
[Fri Mar  9 08:39:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 08:39:48 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Fri Mar  9 08:39:48 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Fri Mar  9 08:39:48 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Fri Mar  9 19:36:32 2012] Warning, spatial fit 61 centroid is now closest to src. 61
[Fri Mar  9 19:36:32 2012] Spatial fit model total counts = 1230.800000, observed total counts = 1236.000000
[Fri Mar  9 19:36:32 2012] Offset between fit and detection position for source 63 = 0.929764 pixels
[Fri Mar  9 19:36:32 2012] Warning, changing simple spatial fit ID from 61 to 65
[Fri Mar  9 19:36:32 2012] 1091.119000 total counts/ 548.242000 bgd. counts: snr = 23.185437
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.929764 pixels
  Position = (334.0, 370.4) = 18 3 55.22 -21 34 18.8
  Extent = 14.7 (14.6-29.4)", rotation angle = 0
  Source counts = 542.9 +/- 33.0
  Background counts = 548.2
  Rate = 0.02 +/- 0.001
[Fri Mar  9 19:36:32 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:32 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:36:32 2012] Source does appear to be extended
[Fri Mar  9 19:36:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:37:52 2012] XMMSAS src. selection expression = ellipse(29011.962000, 32173.264000, 881.034025, 881.034025, 0.000000, X, Y)
[Fri Mar  9 19:37:52 2012] Writing source region out to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src63_src.reg
[Fri Mar  9 19:37:52 2012] Extracting stamp from image fullrun_pn_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (283, 320) - (385, 421)
[Fri Mar  9 19:37:52 2012] XMMSAS bgd. selection expression = annulus(29011.962000, 32173.264000, 1468.390042, 2936.780085, X, Y) && !ellipse(25468.278000, 34649.876000, 1586.448046, 1586.448046, 0.000000, X, Y) && !ellipse(25873.026000, 34334.764000, 1559.632045, 1559.632045, 0.000000, X, Y) && !ellipse(26419.322449, 33865.514069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26041.720800, 33136.238400, 594.840817, 594.840817, 0.000000, X, Y) && !ellipse(27137.160000, 33411.598000, 548.616016, 548.616016, 0.000000, X, Y) && !ellipse(26608.580902, 32666.747101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28446.256775, 32487.691925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26932.106000, 32292.712000, 1480.984043, 1480.984043, 0.000000, X, Y) && !ellipse(25572.724000, 31760.604000, 1673.456048, 1673.456048, 0.000000, X, Y) && !ellipse(28152.111389, 31701.789978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25901.233400, 31582.676200, 1409.736041, 264.696008, 38.391700, X, Y) && !ellipse(29398.898000, 31943.256000, 522.820015, 522.820015, 0.000000, X, Y) && !ellipse(28930.016388, 31256.477844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26177.278598, 31363.328760, 1387.888040, 285.568116, 216.988973, X, Y) && !ellipse(31163.021265, 30985.865988, 1437.440041, 389.565616, 30.652756, X, Y) && !ellipse(32044.038780, 30595.099000, 1543.704044, 372.309611, 23.395000, X, Y) && !ellipse(29539.255341, 30917.279266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32181.460000, 30536.321200, 702.853620, 702.853620, 0.000000, X, Y) && !ellipse(30747.646790, 30369.575928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27047.266083, 30765.414246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31189.451630, 30129.295776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27906.037964, 30120.685516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31607.506600, 29964.449000, 1501.184043, 276.616008, 21.140000, X, Y) && !ellipse(28660.882170, 29773.102310, 1451.904042, 181.488005, 29.541501, X, Y) && !ellipse(33276.850200, 30104.686000, 1451.904042, 398.626411, 21.057700, X, Y) && !ellipse(32288.104000, 29686.846000, 1341.112039, 261.793608, 24.953000, X, Y) && !ellipse(28512.552000, 29826.030000, 1346.536039, 1346.536039, 0.000000, X, Y) && !ellipse(29594.023285, 29172.205505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30562.795685, 28774.166168, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 19:37:52 2012] Writing fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src63.gif
[Fri Mar  9 20:38:19 2012] Mean detx,y = (1928.55, -4722.51) 
[Fri Mar  9 20:38:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 20:38:42 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 20:38:43 2012] Setting source spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Fri Mar  9 20:38:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Sat Mar 10 04:28:27 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:27 2012] Error reading totcts from fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sat Mar 10 04:28:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:31 2012] Using photon index=1.80, rate=0.0186, arf fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src63.arf
[Sat Mar 10 04:28:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:31 2012] Updating source flux to 5.8e-14
[Sat Mar 10 04:43:09 2012] Flag c found in src. 63 procflags, skipping spectral fitting