[Thu Mar  8 00:54:57 2012] Detection parameters:
  Position = (311.3, 373.1) = 18 4 2.32 -21 34 5.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.3 +/- 18.9
  Background counts = 72.0
  Rate = 0.007 +/- 0.0009

[Thu Mar  8 00:54:58 2012] Off-axis axis estimate = 5.49'
[Thu Mar  8 00:58:45 2012] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:58:45 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Thu Mar  8 00:58:45 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.102
[Thu Mar  8 00:58:45 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 9.17"
[Thu Mar  8 09:35:04 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src61.ximg exists
[Thu Mar  8 09:35:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src61.csv
[Thu Mar  8 09:35:04 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src61_1.ximg exists
[Thu Mar  8 09:35:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src61.csv
[Thu Mar  8 09:35:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 09:35:06 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Thu Mar  8 09:35:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src61.csv
[Thu Mar  8 09:35:06 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Thu Mar  8 09:35:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src61.csv
[Thu Mar  8 09:35:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:53:05 2012] Warning, spatial fit 61 centroid is now closest to src. 60
[Thu Mar  8 19:53:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:05 2012] Assessing source extent using major
[Thu Mar  8 19:53:05 2012] Source does appear to be extended
[Thu Mar  8 19:53:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:05 2012] Source is confused with source 60
[Thu Mar  8 19:54:10 2012] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 19:54:10 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Thu Mar  8 19:54:10 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.102
[Thu Mar  8 19:54:10 2012] Giving source the simple spatial ID 60 for pass 1, mean size = 9.17"
[Fri Mar  9 08:39:45 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src60.ximg exists
[Fri Mar  9 08:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src60.csv
[Fri Mar  9 08:39:45 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src60_1.ximg exists
[Fri Mar  9 08:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src60.csv
[Fri Mar  9 08:39:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 08:39:48 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Fri Mar  9 08:39:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src60.csv
[Fri Mar  9 08:39:48 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Fri Mar  9 08:39:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src60.csv
[Fri Mar  9 08:39:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:36:32 2012] Spatial fit model total counts = 556.212000, observed total counts = 1094.000000
[Fri Mar  9 19:36:32 2012] Poor agreement between spatial fit and data for source 62
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar  9 19:36:32 2012] Spatial fit model total counts = 1109.980000, observed total counts = 1110.000000
[Fri Mar  9 19:36:32 2012] Offset between fit and detection position for source 62 = 1.776449 pixels
[Fri Mar  9 19:36:32 2012] Warning, changing simple spatial fit ID from 60 to 58
[Fri Mar  9 19:36:32 2012] 1078.653000 total counts/ 699.614000 bgd. counts: snr = 14.330279
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 1.776449 pixels
  Position = (310.1, 371.7) = 18 4 2.68 -21 34 12.8
  Extent = 18.5 (18.5-18.5)", rotation angle = 0
  Source counts = 379.0 +/- 32.8
  Background counts = 699.6
  Rate = 0.01 +/- 0.001
[Fri Mar  9 19:36:32 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:32 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:36:32 2012] Source does appear to be extended
[Fri Mar  9 19:36:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:37:52 2012] XMMSAS src. selection expression = ellipse(26932.106000, 32292.712000, 1110.738032, 1110.738032, 0.000000, X, Y)
[Fri Mar  9 19:37:52 2012] Writing source region out to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src62_src.reg
[Fri Mar  9 19:37:52 2012] Extracting stamp from image fullrun_pn_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (246, 308) - (374, 436)
[Fri Mar  9 19:37:52 2012] XMMSAS bgd. selection expression = annulus(26932.106000, 32292.712000, 1851.230053, 3702.460107, X, Y) && !ellipse(21799.402000, 38256.392000, 2281.408066, 468.295213, 49.864000, X, Y) && !ellipse(22737.804000, 37188.990000, 1850.864053, 1850.864053, 0.000000, X, Y) && !ellipse(30822.300903, 36678.554779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26494.596000, 36224.198800, 602.534417, 602.534417, 0.000000, X, Y) && !ellipse(22405.110600, 36119.491000, 832.400024, 832.400024, 0.000000, X, Y) && !ellipse(23415.316000, 36450.816400, 1740.256050, 425.669612, 45.755300, X, Y) && !ellipse(23185.406180, 35460.872200, 1689.648049, 273.804808, 41.645000, X, Y) && !ellipse(23548.898000, 35028.294000, 1689.648049, 1689.648049, 0.000000, X, Y) && !ellipse(25468.278000, 34649.876000, 1586.448046, 1586.448046, 0.000000, X, Y) && !ellipse(22100.872000, 34727.526000, 1628.616047, 1628.616047, 0.000000, X, Y) && !ellipse(25873.026000, 34334.764000, 1559.632045, 1559.632045, 0.000000, X, Y) && !ellipse(22667.845020, 34221.996200, 914.048026, 914.048026, 0.000000, X, Y) && !ellipse(26419.322449, 33865.514069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25198.378021, 33677.259216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26041.720800, 33136.238400, 594.840817, 594.840817, 0.000000, X, Y) && !ellipse(27137.160000, 33411.598000, 548.616016, 548.616016, 0.000000, X, Y) && !ellipse(26608.580902, 32666.747101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28446.256775, 32487.691925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29011.962000, 32173.264000, 1174.712034, 1174.712034, 0.000000, X, Y) && !ellipse(25572.724000, 31760.604000, 1673.456048, 1673.456048, 0.000000, X, Y) && !ellipse(28152.111389, 31701.789978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25901.233400, 31582.676200, 1409.736041, 264.696008, 38.391700, X, Y) && !ellipse(29398.898000, 31943.256000, 522.820015, 522.820015, 0.000000, X, Y) && !ellipse(28930.016388, 31256.477844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26177.278598, 31363.328760, 1387.888040, 285.568116, 216.988973, X, Y) && !ellipse(31163.021265, 30985.865988, 1437.440041, 389.565616, 30.652756, X, Y) && !ellipse(32044.038780, 30595.099000, 1543.704044, 372.309611, 23.395000, X, Y) && !ellipse(29539.255341, 30917.279266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30747.646790, 30369.575928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27047.266083, 30765.414246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31189.451630, 30129.295776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27906.037964, 30120.685516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31607.506600, 29964.449000, 1501.184043, 276.616008, 21.140000, X, Y) && !ellipse(28660.882170, 29773.102310, 1451.904042, 181.488005, 29.541501, X, Y) && !ellipse(28512.552000, 29826.030000, 1346.536039, 1346.536039, 0.000000, X, Y) && !ellipse(29594.023285, 29172.205505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30562.795685, 28774.166168, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 19:37:52 2012] Writing fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src62.gif
[Fri Mar  9 20:37:19 2012] Mean detx,y = (-97.06, -5057.89) 
[Fri Mar  9 20:37:23 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 20:38:03 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 20:38:03 2012] Setting source spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Fri Mar  9 20:38:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Sat Mar 10 04:28:27 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:27 2012] Error reading totcts from fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Sat Mar 10 04:28:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:31 2012] Using photon index=1.80, rate=0.013, arf fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src62.arf
[Sat Mar 10 04:28:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:31 2012] Updating source flux to 4e-14
[Sat Mar 10 04:43:09 2012] Flag p found in src. 62 procflags, skipping spectral fitting
[Sat Mar 10 04:43:09 2012] Flag c found in src. 62 procflags, skipping spectral fitting