[Thu Mar  8 00:54:57 2012] Detection parameters:
  Position = (290.2, 387.7) = 18 4 8.89 -21 33 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.5 +/- 16.1
  Background counts = 76.0
  Rate = 0.006 +/- 0.001

[Thu Mar  8 00:54:58 2012] Off-axis axis estimate = 6.50'
[Thu Mar  8 00:58:45 2012] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:58:45 2012] Initial guess for spatial extent in simple fitting = 9.68"
[Thu Mar  8 00:58:45 2012] source mask rpix=2.2, npix_max = 29, mask sum = 20, frac = 0.674
[Thu Mar  8 00:58:45 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 9.68"
[Thu Mar  8 09:35:04 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src55.ximg exists
[Thu Mar  8 09:35:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src55.csv
[Thu Mar  8 09:35:04 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src55_1.ximg exists
[Thu Mar  8 09:35:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src55.csv
[Thu Mar  8 09:35:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 09:35:06 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Thu Mar  8 09:35:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src55.csv
[Thu Mar  8 09:35:06 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Thu Mar  8 09:35:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src55.csv
[Thu Mar  8 09:35:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:53:05 2012] Spatial fit model total counts = 945.155000, observed total counts = 595.000000
[Thu Mar  8 19:53:05 2012] Poor agreement between spatial fit and data for source 56
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar  8 19:53:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:05 2012] Assessing source extent using major
[Thu Mar  8 19:53:05 2012] Source does appear to be extended
[Thu Mar  8 19:53:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:05 2012] Source is confused with source 50
[Thu Mar  8 19:54:10 2012] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 19:54:10 2012] Initial guess for spatial extent in simple fitting = 9.68"
[Thu Mar  8 19:54:10 2012] source mask rpix=2.2, npix_max = 29, mask sum = 20, frac = 0.674
[Thu Mar  8 19:54:10 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 9.68"
[Fri Mar  9 08:39:45 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src54.ximg exists
[Fri Mar  9 08:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src54.csv
[Fri Mar  9 08:39:45 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src54_1.ximg exists
[Fri Mar  9 08:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src54.csv
[Fri Mar  9 08:39:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 08:39:48 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Fri Mar  9 08:39:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src54.csv
[Fri Mar  9 08:39:48 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Fri Mar  9 08:39:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src54.csv
[Fri Mar  9 08:39:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:36:32 2012] Source 56 is offset by 8.060138 and -4.264173 pixels which is larger than
2 X fitted extent = 1.454235 x 1.454235, not incorporating fit results
[Fri Mar  9 19:36:32 2012] Source 56 is offset by 4.977219 and -4.085848 pixels which is larger than
2 X fitted extent = 11.633885 x 2.148892, not incorporating fit results
[Fri Mar  9 19:36:32 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:32 2012] Assessing source extent using major
[Fri Mar  9 19:36:32 2012] Source does appear to be extended
[Fri Mar  9 19:36:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:37:52 2012] XMMSAS src. selection expression = ellipse(25198.378021, 33677.259216, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar  9 19:37:52 2012] Writing source region out to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src56_src.reg
[Fri Mar  9 19:37:52 2012] Extracting stamp from image fullrun_pn_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (253, 350) - (328, 425)
[Fri Mar  9 19:37:52 2012] XMMSAS bgd. selection expression = annulus(25198.378021, 33677.259216, 1087.500000, 2175.000000, X, Y) && !ellipse(22737.804000, 37188.990000, 1850.864053, 1850.864053, 0.000000, X, Y) && !ellipse(26494.596000, 36224.198800, 602.534417, 602.534417, 0.000000, X, Y) && !ellipse(22405.110600, 36119.491000, 832.400024, 832.400024, 0.000000, X, Y) && !ellipse(23415.316000, 36450.816400, 1740.256050, 425.669612, 45.755300, X, Y) && !ellipse(23185.406180, 35460.872200, 1689.648049, 273.804808, 41.645000, X, Y) && !ellipse(23548.898000, 35028.294000, 1689.648049, 1689.648049, 0.000000, X, Y) && !ellipse(25468.278000, 34649.876000, 1586.448046, 1586.448046, 0.000000, X, Y) && !ellipse(22100.872000, 34727.526000, 1628.616047, 1628.616047, 0.000000, X, Y) && !ellipse(25873.026000, 34334.764000, 1559.632045, 1559.632045, 0.000000, X, Y) && !ellipse(22667.845020, 34221.996200, 914.048026, 914.048026, 0.000000, X, Y) && !ellipse(26419.322449, 33865.514069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26041.720800, 33136.238400, 594.840817, 594.840817, 0.000000, X, Y) && !ellipse(27137.160000, 33411.598000, 548.616016, 548.616016, 0.000000, X, Y) && !ellipse(26608.580902, 32666.747101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26932.106000, 32292.712000, 1480.984043, 1480.984043, 0.000000, X, Y) && !ellipse(25572.724000, 31760.604000, 1673.456048, 1673.456048, 0.000000, X, Y) && !ellipse(28152.111389, 31701.789978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25901.233400, 31582.676200, 1409.736041, 264.696008, 38.391700, X, Y) && !ellipse(26177.278598, 31363.328760, 1387.888040, 285.568116, 216.988973, X, Y) && !ellipse(27047.266083, 30765.414246, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 19:37:52 2012] Writing fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src56.gif
[Fri Mar  9 20:33:52 2012] Mean detx,y = (-1688.61, -6240.45) 
[Fri Mar  9 20:33:56 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 20:34:15 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 20:34:16 2012] Setting source spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Fri Mar  9 20:34:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Fri Mar  9 22:42:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar  9 22:42:04 2012] rmf not generated due to insufficient counts
[Sat Mar 10 04:28:27 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:27 2012] Error reading totcts from fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sat Mar 10 04:28:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:31 2012] Using photon index=1.80, rate=0.00633, arf fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src56.arf
[Sat Mar 10 04:28:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:31 2012] Updating source flux to 3e-14
[Sat Mar 10 04:43:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting