[Thu Mar  8 00:54:57 2012] Detection parameters:
  Position = (253.5, 402.1) = 18 4 20.32 -21 32 0.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.7 +/- 19.0
  Background counts = 71.6
  Rate = 0.004 +/- 0.0006

[Thu Mar  8 00:54:58 2012] Off-axis axis estimate = 8.19'
[Thu Mar  8 00:58:45 2012] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:58:45 2012] Initial guess for spatial extent in simple fitting = 10.52"
[Thu Mar  8 00:58:45 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.880
[Thu Mar  8 00:58:45 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 10.52"
[Thu Mar  8 09:35:03 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src50.ximg exists
[Thu Mar  8 09:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src50.csv
[Thu Mar  8 09:35:03 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src50_1.ximg exists
[Thu Mar  8 09:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src50.csv
[Thu Mar  8 09:35:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 09:35:06 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Thu Mar  8 09:35:06 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Thu Mar  8 09:35:06 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Thu Mar  8 19:53:05 2012] Spatial fit model total counts = 960.111000, observed total counts = 960.000000
[Thu Mar  8 19:53:05 2012] Offset between fit and detection position for source 51 = 3.027917 pixels
[Thu Mar  8 19:53:05 2012] 885.739000 total counts/ 545.407000 bgd. counts: snr = 14.572781
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 3.027917 pixels
  Position = (255.2, 399.5) = 18 4 19.81 -21 32 11.8
  Extent = 13.7 (10.6-21.0)", rotation angle = 0
  Source counts = 340.3 +/- 29.8
  Background counts = 545.4
  Rate = 0.01 +/- 0.001
[Thu Mar  8 19:53:05 2012] Spatial fit model total counts = 957.352000, observed total counts = 954.000000
[Thu Mar  8 19:53:05 2012] Offset between fit and detection position for source 51 = 0.606103 pixels
[Thu Mar  8 19:53:05 2012] Warning, changing simple spatial fit ID from 50 to 52
[Thu Mar  8 19:53:05 2012] 957.574000 total counts/ 545.062000 bgd. counts: snr = 17.669068
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 0.606103 pixels
  Position = (254.6, 399.7) = 18 4 19.99 -21 32 11.1
  Extent = 20.4 (20.3-40.7)", rotation angle = 0
  Source counts = 412.5 +/- 30.9
  Background counts = 545.1
  Rate = 0.01 +/- 0.001
[Thu Mar  8 19:53:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:05 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 19:53:05 2012] Source does appear to be extended
[Thu Mar  8 19:53:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:05 2012] Source is confused with source 47
[Thu Mar  8 19:54:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 19:54:10 2012] Initial guess for spatial extent in simple fitting = 20.36"
[Thu Mar  8 19:54:10 2012] source mask rpix=4.7, npix_max = 107, mask sum = 110, frac = 1.025
[Thu Mar  8 19:54:10 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 20.36"
[Fri Mar  9 08:39:45 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src49.ximg exists
[Fri Mar  9 08:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src49.csv
[Fri Mar  9 08:39:45 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src49_1.ximg exists
[Fri Mar  9 08:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src49.csv
[Fri Mar  9 08:39:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 08:39:48 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Fri Mar  9 08:39:48 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Fri Mar  9 08:39:48 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Fri Mar  9 19:36:32 2012] Warning, spatial fit 49 centroid is now closest to src. 57
[Fri Mar  9 19:36:32 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:32 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:36:32 2012] Source does appear to be extended
[Fri Mar  9 19:36:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:37:51 2012] XMMSAS src. selection expression = ellipse(22100.872000, 34727.526000, 1221.462035, 1221.462035, 0.000000, X, Y)
[Fri Mar  9 19:37:51 2012] Writing source region out to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src51_src.reg
[Fri Mar  9 19:37:51 2012] Extracting stamp from image fullrun_pn_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (184, 330) - (325, 470)
[Fri Mar  9 19:37:51 2012] XMMSAS bgd. selection expression = annulus(22100.872000, 34727.526000, 2035.770059, 4071.540117, X, Y) && !ellipse(17636.210000, 40265.378000, 1586.096046, 1586.096046, 0.000000, X, Y) && !ellipse(18245.708760, 39390.475400, 2053.416059, 478.498414, 55.433100, X, Y) && !ellipse(21275.420898, 38825.690247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18620.003200, 38846.987800, 1943.152056, 460.004813, 53.944700, X, Y) && !ellipse(20116.233780, 38750.882141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21799.402000, 38256.392000, 2281.408066, 468.295213, 49.864000, X, Y) && !ellipse(18877.682000, 38514.354000, 1579.408045, 1579.408045, 0.000000, X, Y) && !ellipse(20682.933853, 38082.972351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22276.635101, 37700.873810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23698.546000, 38082.522000, 1796.648052, 1796.648052, 0.000000, X, Y) && !ellipse(21490.516769, 37181.518219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19781.185013, 37255.105011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22737.804000, 37188.990000, 1850.864053, 1850.864053, 0.000000, X, Y) && !ellipse(20219.122640, 36762.032140, 1836.968053, 417.407212, 49.344000, X, Y) && !ellipse(26494.596000, 36224.198800, 602.534417, 602.534417, 0.000000, X, Y) && !ellipse(22405.110600, 36119.491000, 832.400024, 832.400024, 0.000000, X, Y) && !ellipse(23415.316000, 36450.816400, 1740.256050, 425.669612, 45.755300, X, Y) && !ellipse(21481.658264, 35448.811584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23185.406180, 35460.872200, 1689.648049, 273.804808, 41.645000, X, Y) && !ellipse(23548.898000, 35028.294000, 1689.648049, 1689.648049, 0.000000, X, Y) && !ellipse(25468.278000, 34649.876000, 1586.448046, 1586.448046, 0.000000, X, Y) && !ellipse(25873.026000, 34334.764000, 1559.632045, 1559.632045, 0.000000, X, Y) && !ellipse(22667.845020, 34221.996200, 914.048026, 914.048026, 0.000000, X, Y) && !ellipse(26419.322449, 33865.514069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25198.378021, 33677.259216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26041.720800, 33136.238400, 594.840817, 594.840817, 0.000000, X, Y) && !ellipse(26608.580902, 32666.747101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26932.106000, 32292.712000, 1480.984043, 1480.984043, 0.000000, X, Y) && !ellipse(25572.724000, 31760.604000, 1673.456048, 1673.456048, 0.000000, X, Y) && !ellipse(25901.233400, 31582.676200, 1409.736041, 264.696008, 38.391700, X, Y) && !ellipse(26177.278598, 31363.328760, 1387.888040, 285.568116, 216.988973, X, Y)
[Fri Mar  9 19:37:51 2012] Writing fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src51.gif
[Fri Mar  9 20:30:13 2012] Mean detx,y = (-4909.42, -7331.89) 
[Fri Mar  9 20:30:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 20:30:59 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 20:31:00 2012] Setting source spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Fri Mar  9 20:31:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Sat Mar 10 04:28:27 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:27 2012] Error reading totcts from fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sat Mar 10 04:28:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:31 2012] Using photon index=1.80, rate=0.0141, arf fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src51.arf
[Sat Mar 10 04:28:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:31 2012] Updating source flux to 5.8e-14
[Sat Mar 10 04:43:09 2012] Flag c found in src. 51 procflags, skipping spectral fitting