[Thu Mar  8 00:54:57 2012] Detection parameters:
  Position = (273.0, 403.4) = 18 4 14.26 -21 31 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.0 +/- 17.8
  Background counts = 75.3
  Rate = 0.005 +/- 0.0006

[Thu Mar  8 00:54:58 2012] Off-axis axis estimate = 7.83'
[Thu Mar  8 00:58:45 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:58:45 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Thu Mar  8 00:58:45 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.906
[Thu Mar  8 00:58:45 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 10.34"
[Thu Mar  8 09:35:03 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src48.ximg exists
[Thu Mar  8 09:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src48.csv
[Thu Mar  8 09:35:03 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src48_1.ximg exists
[Thu Mar  8 09:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src48.csv
[Thu Mar  8 09:35:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 09:35:06 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Thu Mar  8 09:35:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src48.csv
[Thu Mar  8 09:35:06 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Thu Mar  8 09:35:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src48.csv
[Thu Mar  8 09:35:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:53:05 2012] Spatial fit model total counts = 1088.380000, observed total counts = 1082.000000
[Thu Mar  8 19:53:05 2012] Offset between fit and detection position for source 49 = 1.742741 pixels
[Thu Mar  8 19:53:05 2012] Warning, changing simple spatial fit ID from 48 to 47
[Thu Mar  8 19:53:05 2012] 1014.019000 total counts/ 337.367000 bgd. counts: snr = 36.839529
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 1.742741 pixels
  Position = (271.2, 403.2) = 18 4 14.80 -21 31 56.0
  Extent = 21.1 (21.0-42.2)", rotation angle = 0
  Source counts = 676.7 +/- 31.8
  Background counts = 337.4
  Rate = 0.02 +/- 0.001
[Thu Mar  8 19:53:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:05 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 19:53:05 2012] Source does appear to be extended
[Thu Mar  8 19:53:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:05 2012] Source is confused with source 48
[Thu Mar  8 19:54:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 19:54:10 2012] Initial guess for spatial extent in simple fitting = 21.12"
[Thu Mar  8 19:54:10 2012] source mask rpix=4.9, npix_max = 114, mask sum = 110, frac = 0.959
[Thu Mar  8 19:54:10 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 21.12"
[Fri Mar  9 08:39:45 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src47.ximg exists
[Fri Mar  9 08:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src47.csv
[Fri Mar  9 08:39:45 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src47_1.ximg exists
[Fri Mar  9 08:39:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src47.csv
[Fri Mar  9 08:39:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 08:39:48 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Fri Mar  9 08:39:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src47.csv
[Fri Mar  9 08:39:48 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Fri Mar  9 08:39:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src47.csv
[Fri Mar  9 08:39:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:36:32 2012] Warning, spatial fit 47 centroid is now closest to src. 56
[Fri Mar  9 19:36:32 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:32 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:36:32 2012] Source does appear to be extended
[Fri Mar  9 19:36:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:37:51 2012] XMMSAS src. selection expression = ellipse(23548.898000, 35028.294000, 1267.236036, 1267.236036, 0.000000, X, Y)
[Fri Mar  9 19:37:51 2012] Writing source region out to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src49_src.reg
[Fri Mar  9 19:37:51 2012] Extracting stamp from image fullrun_pn_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (198, 330) - (344, 476)
[Fri Mar  9 19:37:51 2012] XMMSAS bgd. selection expression = annulus(23548.898000, 35028.294000, 2112.060061, 4224.120122, X, Y) && !ellipse(19922.824000, 40640.620000, 1690.608049, 1690.608049, 0.000000, X, Y) && !ellipse(20521.363600, 39865.803600, 1002.992029, 1002.992029, 0.000000, X, Y) && !ellipse(18245.708760, 39390.475400, 2053.416059, 478.498414, 55.433100, X, Y) && !ellipse(21275.420898, 38825.690247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18620.003200, 38846.987800, 1943.152056, 460.004813, 53.944700, X, Y) && !ellipse(20116.233780, 38750.882141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21799.402000, 38256.392000, 2281.408066, 468.295213, 49.864000, X, Y) && !ellipse(18877.682000, 38514.354000, 1579.408045, 1579.408045, 0.000000, X, Y) && !ellipse(20682.933853, 38082.972351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22276.635101, 37700.873810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23698.546000, 38082.522000, 1796.648052, 1796.648052, 0.000000, X, Y) && !ellipse(21490.516769, 37181.518219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19781.185013, 37255.105011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22737.804000, 37188.990000, 1850.864053, 1850.864053, 0.000000, X, Y) && !ellipse(20219.122640, 36762.032140, 1836.968053, 417.407212, 49.344000, X, Y) && !ellipse(26494.596000, 36224.198800, 602.534417, 602.534417, 0.000000, X, Y) && !ellipse(22405.110600, 36119.491000, 832.400024, 832.400024, 0.000000, X, Y) && !ellipse(23415.316000, 36450.816400, 1740.256050, 425.669612, 45.755300, X, Y) && !ellipse(21481.658264, 35448.811584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23185.406180, 35460.872200, 1689.648049, 273.804808, 41.645000, X, Y) && !ellipse(25468.278000, 34649.876000, 1586.448046, 1586.448046, 0.000000, X, Y) && !ellipse(22100.872000, 34727.526000, 1628.616047, 1628.616047, 0.000000, X, Y) && !ellipse(25873.026000, 34334.764000, 1559.632045, 1559.632045, 0.000000, X, Y) && !ellipse(22667.845020, 34221.996200, 914.048026, 914.048026, 0.000000, X, Y) && !ellipse(26419.322449, 33865.514069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25198.378021, 33677.259216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26041.720800, 33136.238400, 594.840817, 594.840817, 0.000000, X, Y) && !ellipse(27137.160000, 33411.598000, 548.616016, 548.616016, 0.000000, X, Y) && !ellipse(26608.580902, 32666.747101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28446.256775, 32487.691925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26932.106000, 32292.712000, 1480.984043, 1480.984043, 0.000000, X, Y) && !ellipse(25572.724000, 31760.604000, 1673.456048, 1673.456048, 0.000000, X, Y) && !ellipse(28152.111389, 31701.789978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25901.233400, 31582.676200, 1409.736041, 264.696008, 38.391700, X, Y) && !ellipse(26177.278598, 31363.328760, 1387.888040, 285.568116, 216.988973, X, Y) && !ellipse(27047.266083, 30765.414246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27906.037964, 30120.685516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28660.882170, 29773.102310, 1451.904042, 181.488005, 29.541501, X, Y) && !ellipse(28512.552000, 29826.030000, 1346.536039, 1346.536039, 0.000000, X, Y)
[Fri Mar  9 19:37:51 2012] Writing fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src49.gif
[Fri Mar  9 20:28:13 2012] Mean detx,y = (-3706.58, -7678.02) 
[Fri Mar  9 20:28:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 20:28:46 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 20:28:47 2012] Setting source spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Fri Mar  9 20:28:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Sat Mar 10 04:28:27 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:27 2012] Error reading totcts from fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sat Mar 10 04:28:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:31 2012] Using photon index=1.80, rate=0.0232, arf fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src49.arf
[Sat Mar 10 04:28:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:31 2012] Updating source flux to 9.3e-14
[Sat Mar 10 04:43:09 2012] Flag c found in src. 49 procflags, skipping spectral fitting