[Thu Mar  8 00:54:57 2012] Detection parameters:
  Position = (251.4, 440.1) = 18 4 20.97 -21 29 13.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 247.6 +/- 23.1
  Background counts = 56.1
  Rate = 0.008 +/- 0.0008

[Thu Mar  8 00:54:58 2012] Off-axis axis estimate = 10.82'
[Thu Mar  8 00:58:45 2012] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:58:45 2012] Initial guess for spatial extent in simple fitting = 11.84"
[Thu Mar  8 00:58:45 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.012
[Thu Mar  8 00:58:45 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 11.84"
[Thu Mar  8 09:35:03 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src31.ximg exists
[Thu Mar  8 09:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src31.csv
[Thu Mar  8 09:35:03 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src31_1.ximg exists
[Thu Mar  8 09:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src31.csv
[Thu Mar  8 09:35:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 09:35:06 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Thu Mar  8 09:35:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src31.csv
[Thu Mar  8 09:35:06 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Thu Mar  8 09:35:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src31.csv
[Thu Mar  8 09:35:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:53:05 2012] Warning, spatial fit 31 centroid is now closest to src. 36
[Thu Mar  8 19:53:05 2012] Spatial fit model total counts = 1146.660000, observed total counts = 1149.000000
[Thu Mar  8 19:53:05 2012] Offset between fit and detection position for source 31 = 3.088088 pixels
[Thu Mar  8 19:53:05 2012] Warning, changing simple spatial fit ID from 31 to 34
[Thu Mar  8 19:53:05 2012] 944.490000 total counts/ 461.584000 bgd. counts: snr = 22.476942
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 3.088088 pixels
  Position = (253.6, 437.9) = 18 4 20.28 -21 29 24.9
  Extent = 14.3 (12.1-18.9)", rotation angle = 0
  Source counts = 482.9 +/- 30.7
  Background counts = 461.6
  Rate = 0.02 +/- 0.001
[Thu Mar  8 19:53:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:05 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 19:53:05 2012] Source does appear to be extended
[Thu Mar  8 19:53:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:05 2012] Source is confused with source 34
[Thu Mar  8 19:54:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 19:54:10 2012] Initial guess for spatial extent in simple fitting = 14.26"
[Thu Mar  8 19:54:10 2012] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.981
[Thu Mar  8 19:54:10 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 14.26"
[Fri Mar  9 08:39:45 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src30.ximg exists
[Fri Mar  9 08:39:45 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri Mar  9 08:39:45 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src30 appears to have run properly
[Fri Mar  9 08:39:47 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri Mar  9 08:39:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src30.csv
[Fri Mar  9 08:39:47 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Mar  9 08:39:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src30.csv
[Fri Mar  9 08:39:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:36:32 2012] Spatial fit model total counts = 2543.450000, observed total counts = 2334.000000
[Fri Mar  9 19:36:32 2012] Offset between fit and detection position for source 31 = 3.453655 pixels
[Fri Mar  9 19:36:32 2012] 2224.176000 total counts/ 1484.710000 bgd. counts: snr = 19.190991
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 3.453655 pixels
  Position = (251.1, 440.3) = 18 4 21.07 -21 29 14.6
  Extent = 28.5 (28.2-57.0)" x 5.9 (5.4-6.3)", rotation angle = 50 (49-51) degrees
  Source counts = 739.5 +/- 47.2
  Background counts = 1484.7
  Rate = 0.03 +/- 0.002
[Fri Mar  9 19:36:32 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:32 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:36:32 2012] Source does appear to be extended
[Fri Mar  9 19:36:32 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.45
[Fri Mar  9 19:36:32 2012] Source is asymmetric
[Fri Mar  9 19:37:50 2012] XMMSAS src. selection expression = ellipse(21799.402000, 38256.392000, 1711.056049, 351.221410, 49.864000, X, Y)
[Fri Mar  9 19:37:50 2012] Writing source region out to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src31_src.reg
[Fri Mar  9 19:37:50 2012] Extracting stamp from image fullrun_pn_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (153, 342) - (349, 539)
[Fri Mar  9 19:37:50 2012] XMMSAS bgd. selection expression = annulus(21799.402000, 38256.392000, 2851.760082, 5703.520164, X, Y) && !ellipse(16455.164764, 42793.697906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16356.547684, 43203.432648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15903.548000, 43600.686000, 852.016025, 852.016025, 0.000000, X, Y) && !ellipse(17438.578323, 42919.981720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17886.079000, 42054.194000, 2233.008064, 289.657608, 239.977000, X, Y) && !ellipse(16903.969589, 43839.994507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18309.614200, 43392.024000, 917.608026, 917.608026, 0.000000, X, Y) && !ellipse(18869.802399, 42408.038971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18185.516000, 41545.664000, 414.756012, 414.756012, 0.000000, X, Y) && !ellipse(18474.965027, 41094.858826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19922.824000, 40640.620000, 1690.608049, 1690.608049, 0.000000, X, Y) && !ellipse(17276.828000, 40768.952000, 1659.024048, 1659.024048, 0.000000, X, Y) && !ellipse(19012.550049, 40345.670624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20276.586000, 40208.288000, 675.856819, 675.856819, 0.000000, X, Y) && !ellipse(17636.210000, 40265.378000, 1586.096046, 1586.096046, 0.000000, X, Y) && !ellipse(20521.363600, 39865.803600, 1002.992029, 1002.992029, 0.000000, X, Y) && !ellipse(18245.708760, 39390.475400, 2053.416059, 478.498414, 55.433100, X, Y) && !ellipse(21275.420898, 38825.690247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18620.003200, 38846.987800, 1943.152056, 460.004813, 53.944700, X, Y) && !ellipse(20116.233780, 38750.882141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18877.682000, 38514.354000, 1579.408045, 1579.408045, 0.000000, X, Y) && !ellipse(20682.933853, 38082.972351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22276.635101, 37700.873810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23698.546000, 38082.522000, 1796.648052, 1796.648052, 0.000000, X, Y) && !ellipse(21490.516769, 37181.518219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19781.185013, 37255.105011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22737.804000, 37188.990000, 1850.864053, 1850.864053, 0.000000, X, Y) && !ellipse(20219.122640, 36762.032140, 1836.968053, 417.407212, 49.344000, X, Y) && !ellipse(26494.596000, 36224.198800, 602.534417, 602.534417, 0.000000, X, Y) && !ellipse(22405.110600, 36119.491000, 832.400024, 832.400024, 0.000000, X, Y) && !ellipse(23415.316000, 36450.816400, 1740.256050, 425.669612, 45.755300, X, Y) && !ellipse(21481.658264, 35448.811584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23185.406180, 35460.872200, 1689.648049, 273.804808, 41.645000, X, Y) && !ellipse(23548.898000, 35028.294000, 1689.648049, 1689.648049, 0.000000, X, Y) && !ellipse(25468.278000, 34649.876000, 1586.448046, 1586.448046, 0.000000, X, Y) && !ellipse(22100.872000, 34727.526000, 1628.616047, 1628.616047, 0.000000, X, Y) && !ellipse(25873.026000, 34334.764000, 1559.632045, 1559.632045, 0.000000, X, Y) && !ellipse(22667.845020, 34221.996200, 914.048026, 914.048026, 0.000000, X, Y) && !ellipse(26419.322449, 33865.514069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25198.378021, 33677.259216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26041.720800, 33136.238400, 594.840817, 594.840817, 0.000000, X, Y) && !ellipse(27137.160000, 33411.598000, 548.616016, 548.616016, 0.000000, X, Y) && !ellipse(26608.580902, 32666.747101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26932.106000, 32292.712000, 1480.984043, 1480.984043, 0.000000, X, Y) && !ellipse(25572.724000, 31760.604000, 1673.456048, 1673.456048, 0.000000, X, Y) && !ellipse(28152.111389, 31701.789978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25901.233400, 31582.676200, 1409.736041, 264.696008, 38.391700, X, Y) && !ellipse(26177.278598, 31363.328760, 1387.888040, 285.568116, 216.988973, X, Y) && !ellipse(17972.285675, 43841.648590, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 19:37:50 2012] Writing fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src31.gif
[Fri Mar  9 20:09:12 2012] Mean detx,y = (-5329.60, -10772.75) 
[Fri Mar  9 20:09:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 20:10:40 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 20:10:40 2012] Setting source spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri Mar  9 20:10:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat Mar 10 04:28:26 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:26 2012] Error reading totcts from fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Mar 10 04:28:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:30 2012] Using photon index=1.80, rate=0.0253, arf fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src31.arf
[Sat Mar 10 04:28:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:30 2012] Updating source flux to 1.5e-13
[Sat Mar 10 04:43:09 2012] Flag c found in src. 31 procflags, skipping spectral fitting