[Thu Mar  8 00:54:57 2012] Detection parameters:
  Position = (245.1, 446.8) = 18 4 22.94 -21 28 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175.9 +/- 19.7
  Background counts = 54.9
  Rate = 0.006 +/- 0.0006

[Thu Mar  8 00:54:58 2012] Off-axis axis estimate = 11.43'
[Thu Mar  8 00:58:45 2012] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:58:45 2012] Initial guess for spatial extent in simple fitting = 12.14"
[Thu Mar  8 00:58:45 2012] source mask rpix=2.8, npix_max = 43, mask sum = 24, frac = 0.554
[Thu Mar  8 00:58:45 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 12.14"
[Thu Mar  8 09:35:03 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src28.ximg exists
[Thu Mar  8 09:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src28.csv
[Thu Mar  8 09:35:03 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu Mar  8 09:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src28.csv
[Thu Mar  8 09:35:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 09:35:05 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu Mar  8 09:35:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Mar  8 09:35:05 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Mar  8 09:35:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Mar  8 09:35:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:53:05 2012] Source 28 is offset by -3.105599 and 3.154187 pixels which is larger than
2 X fitted extent = 11.167541 x 2.895687, not incorporating fit results
[Thu Mar  8 19:53:05 2012] Source 28 is offset by -3.534587 and -2.807353 pixels which is larger than
2 X fitted extent = 1.329641 x 1.329641, not incorporating fit results
[Thu Mar  8 19:53:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:05 2012] Assessing source extent using major
[Thu Mar  8 19:53:05 2012] Source does appear to be extended
[Thu Mar  8 19:53:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:54:10 2012] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 19:54:10 2012] Initial guess for spatial extent in simple fitting = 12.14"
[Thu Mar  8 19:54:10 2012] source mask rpix=2.8, npix_max = 43, mask sum = 24, frac = 0.554
[Thu Mar  8 19:54:10 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 12.14"
[Fri Mar  9 08:39:44 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src27.ximg exists
[Fri Mar  9 08:39:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src27.csv
[Fri Mar  9 08:39:44 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Mar  9 08:39:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src27.csv
[Fri Mar  9 08:39:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 08:39:47 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Mar  9 08:39:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri Mar  9 08:39:47 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Mar  9 08:39:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri Mar  9 08:39:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:36:32 2012] Source 28 is offset by -3.715933 and 4.081856 pixels which is larger than
2 X fitted extent = 3.029196 x 11.167541, not incorporating fit results
[Fri Mar  9 19:36:32 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:32 2012] Assessing source extent using major
[Fri Mar  9 19:36:32 2012] Source does appear to be extended
[Fri Mar  9 19:36:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:36:32 2012] Source is confused with source 31
[Fri Mar  9 19:37:50 2012] XMMSAS src. selection expression = ellipse(21275.420898, 38825.690247, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar  9 19:37:50 2012] Writing source region out to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src28_src.reg
[Fri Mar  9 19:37:50 2012] Extracting stamp from image fullrun_pn_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (208, 409) - (283, 484)
[Fri Mar  9 19:37:50 2012] XMMSAS bgd. selection expression = annulus(21275.420898, 38825.690247, 1087.500000, 2175.000000, X, Y) && !ellipse(17886.079000, 42054.194000, 2233.008064, 289.657608, 239.977000, X, Y) && !ellipse(18474.965027, 41094.858826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19922.824000, 40640.620000, 1690.608049, 1690.608049, 0.000000, X, Y) && !ellipse(19012.550049, 40345.670624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20276.586000, 40208.288000, 675.856819, 675.856819, 0.000000, X, Y) && !ellipse(17636.210000, 40265.378000, 1586.096046, 1586.096046, 0.000000, X, Y) && !ellipse(20521.363600, 39865.803600, 1002.992029, 1002.992029, 0.000000, X, Y) && !ellipse(18245.708760, 39390.475400, 2053.416059, 478.498414, 55.433100, X, Y) && !ellipse(18620.003200, 38846.987800, 1943.152056, 460.004813, 53.944700, X, Y) && !ellipse(20116.233780, 38750.882141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21799.402000, 38256.392000, 2281.408066, 468.295213, 49.864000, X, Y) && !ellipse(18877.682000, 38514.354000, 1579.408045, 1579.408045, 0.000000, X, Y) && !ellipse(20682.933853, 38082.972351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22276.635101, 37700.873810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23698.546000, 38082.522000, 1796.648052, 1796.648052, 0.000000, X, Y) && !ellipse(21490.516769, 37181.518219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19781.185013, 37255.105011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22737.804000, 37188.990000, 1850.864053, 1850.864053, 0.000000, X, Y) && !ellipse(20219.122640, 36762.032140, 1836.968053, 417.407212, 49.344000, X, Y) && !ellipse(22405.110600, 36119.491000, 832.400024, 832.400024, 0.000000, X, Y) && !ellipse(23415.316000, 36450.816400, 1740.256050, 425.669612, 45.755300, X, Y) && !ellipse(23185.406180, 35460.872200, 1689.648049, 273.804808, 41.645000, X, Y) && !ellipse(23548.898000, 35028.294000, 1689.648049, 1689.648049, 0.000000, X, Y)
[Fri Mar  9 19:37:50 2012] Writing fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src28.gif
[Fri Mar  9 20:06:20 2012] Mean detx,y = (-5734.50, -11331.41) 
[Fri Mar  9 20:06:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 20:06:45 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 20:06:46 2012] Setting source spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Fri Mar  9 20:06:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Fri Mar  9 21:55:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar  9 21:55:41 2012] rmf not generated due to insufficient counts
[Sat Mar 10 04:28:26 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:26 2012] Error reading totcts from fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Mar 10 04:28:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:30 2012] Using photon index=1.80, rate=0.00577, arf fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src28.arf
[Sat Mar 10 04:28:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:30 2012] Updating source flux to 5.4e-14
[Sat Mar 10 04:43:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting