[Thu Mar  8 00:54:57 2012] Detection parameters:
  Position = (238.2, 457.0) = 18 4 25.08 -21 28 0.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211.7 +/- 20.8
  Background counts = 55.3
  Rate = 0.007 +/- 0.0007

[Thu Mar  8 00:54:58 2012] Off-axis axis estimate = 12.30'
[Thu Mar  8 00:58:45 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:58:45 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Thu Mar  8 00:58:45 2012] source mask rpix=2.9, npix_max = 46, mask sum = 39, frac = 0.848
[Thu Mar  8 00:58:45 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 12.58"
[Thu Mar  8 09:35:03 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src25.ximg exists
[Thu Mar  8 09:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src25.csv
[Thu Mar  8 09:35:03 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Mar  8 09:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src25.csv
[Thu Mar  8 09:35:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 09:35:05 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Mar  8 09:35:05 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Mar  8 09:35:05 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Thu Mar  8 19:53:05 2012] Source 25 is offset by -3.163967 and 1.453136 pixels which is larger than
2 X fitted extent = 1.550800 x 1.550800, not incorporating fit results
[Thu Mar  8 19:53:05 2012] Spatial fit model total counts = 1044.590000, observed total counts = 962.000000
[Thu Mar  8 19:53:05 2012] Offset between fit and detection position for source 25 = 2.507597 pixels
[Thu Mar  8 19:53:05 2012] 800.888000 total counts/ 409.288000 bgd. counts: snr = 19.356560
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 2.507597 pixels
  Position = (236.4, 458.8) = 18 4 25.64 -21 27 54.1
  Extent = 12.5 (11.0-15.1)", rotation angle = 0
  Source counts = 391.6 +/- 28.3
  Background counts = 409.3
  Rate = 0.01 +/- 0.001
[Thu Mar  8 19:53:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:05 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 19:53:05 2012] Source does appear to be extended
[Thu Mar  8 19:53:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:05 2012] Source is confused with source 19
[Thu Mar  8 19:54:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 19:54:10 2012] Initial guess for spatial extent in simple fitting = 12.54"
[Thu Mar  8 19:54:10 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.071
[Thu Mar  8 19:54:10 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 12.54"
[Fri Mar  9 08:39:44 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src24.ximg exists
[Fri Mar  9 08:39:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src24.csv
[Fri Mar  9 08:39:44 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src24_1.ximg exists
[Fri Mar  9 08:39:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src24.csv
[Fri Mar  9 08:39:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 08:39:47 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Fri Mar  9 08:39:47 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Fri Mar  9 08:39:47 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Fri Mar  9 19:36:32 2012] Spatial fit model total counts = 2774.770000, observed total counts = 2195.000000
[Fri Mar  9 19:36:32 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar  9 19:36:32 2012] Warning, spatial fit 24 centroid is now closest to src. 23
[Fri Mar  9 19:36:32 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:32 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:36:32 2012] Source does appear to be extended
[Fri Mar  9 19:36:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:37:50 2012] XMMSAS src. selection expression = ellipse(20521.363600, 39865.803600, 752.244022, 752.244022, 0.000000, X, Y)
[Fri Mar  9 19:37:50 2012] Writing source region out to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src25_src.reg
[Fri Mar  9 19:37:50 2012] Extracting stamp from image fullrun_pn_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (193, 416) - (280, 502)
[Fri Mar  9 19:37:50 2012] XMMSAS bgd. selection expression = annulus(20521.363600, 39865.803600, 1253.740036, 2507.480072, X, Y) && !ellipse(17438.578323, 42919.981720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17886.079000, 42054.194000, 2233.008064, 289.657608, 239.977000, X, Y) && !ellipse(18869.802399, 42408.038971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18185.516000, 41545.664000, 414.756012, 414.756012, 0.000000, X, Y) && !ellipse(18474.965027, 41094.858826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19922.824000, 40640.620000, 1690.608049, 1690.608049, 0.000000, X, Y) && !ellipse(17276.828000, 40768.952000, 1659.024048, 1659.024048, 0.000000, X, Y) && !ellipse(19012.550049, 40345.670624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20276.586000, 40208.288000, 675.856819, 675.856819, 0.000000, X, Y) && !ellipse(17636.210000, 40265.378000, 1586.096046, 1586.096046, 0.000000, X, Y) && !ellipse(18245.708760, 39390.475400, 2053.416059, 478.498414, 55.433100, X, Y) && !ellipse(21275.420898, 38825.690247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18620.003200, 38846.987800, 1943.152056, 460.004813, 53.944700, X, Y) && !ellipse(20116.233780, 38750.882141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21799.402000, 38256.392000, 2281.408066, 468.295213, 49.864000, X, Y) && !ellipse(18877.682000, 38514.354000, 1579.408045, 1579.408045, 0.000000, X, Y) && !ellipse(20682.933853, 38082.972351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22276.635101, 37700.873810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23698.546000, 38082.522000, 1796.648052, 1796.648052, 0.000000, X, Y) && !ellipse(21490.516769, 37181.518219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19781.185013, 37255.105011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22737.804000, 37188.990000, 1850.864053, 1850.864053, 0.000000, X, Y) && !ellipse(20219.122640, 36762.032140, 1836.968053, 417.407212, 49.344000, X, Y) && !ellipse(23415.316000, 36450.816400, 1740.256050, 425.669612, 45.755300, X, Y)
[Fri Mar  9 19:37:50 2012] Writing fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src25.gif
[Fri Mar  9 20:02:40 2012] Mean detx,y = (-6671.27, -12436.33) 
[Fri Mar  9 20:02:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 20:03:10 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 20:03:10 2012] Setting source spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Mar  9 20:03:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Mar 10 04:28:26 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:26 2012] Error reading totcts from fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Mar 10 04:28:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:30 2012] Using photon index=1.80, rate=0.0134, arf fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src25.arf
[Sat Mar 10 04:28:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:30 2012] Getting flux using calc_pl_flux failed
[Sat Mar 10 04:43:09 2012] Flag b found in src. 25 procflags, skipping spectral fitting
[Sat Mar 10 04:43:09 2012] Flag p found in src. 25 procflags, skipping spectral fitting
[Sat Mar 10 04:43:09 2012] Flag c found in src. 25 procflags, skipping spectral fitting