[Thu Mar 8 00:54:57 2012] Detection parameters: Position = (207.0, 457.0) = 18 4 34.82 -21 27 59.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 195.4 +/- 23.1 Background counts = 62.6 Rate = 0.006 +/- 0.0008 [Thu Mar 8 00:54:58 2012] Off-axis axis estimate = 13.27' [Thu Mar 8 00:58:45 2012] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting [Thu Mar 8 00:58:45 2012] Initial guess for spatial extent in simple fitting = 13.06" [Thu Mar 8 00:58:45 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.998 [Thu Mar 8 00:58:45 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 13.06" [Thu Mar 8 09:35:03 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src24.ximg exists [Thu Mar 8 09:35:03 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src24.csv [Thu Mar 8 09:35:03 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src24_1.ximg exists [Thu Mar 8 09:35:03 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src24.csv [Thu Mar 8 09:35:03 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src24_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Mar 8 09:35:05 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists [Thu Mar 8 09:35:05 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists [Thu Mar 8 09:35:05 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly [Thu Mar 8 19:53:05 2012] Spatial fit model total counts = 1263.780000, observed total counts = 1262.000000 [Thu Mar 8 19:53:05 2012] Offset between fit and detection position for source 24 = 7.386160 pixels [Thu Mar 8 19:53:05 2012] 1212.628000 total counts/ 572.054000 bgd. counts: snr = 26.782480 Spatial fit parameters: Offset between fit and detection position for source 24 = 7.386160 pixels Position = (203.3, 463.4) = 18 4 35.97 -21 27 34.0 Extent = 19.8 (16.1-24.1)", rotation angle = 0 Source counts = 640.6 +/- 34.8 Background counts = 572.1 Rate = 0.02 +/- 0.001 [Thu Mar 8 19:53:05 2012] Vigneting correction estimate = 1.000000 [Thu Mar 8 19:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Mar 8 19:53:05 2012] Assessing source extent using major axis lower bound [Thu Mar 8 19:53:05 2012] Source does appear to be extended [Thu Mar 8 19:53:05 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Mar 8 19:53:05 2012] Source is confused with source 18 [Thu Mar 8 19:53:05 2012] Source is confused with source 20 [Thu Mar 8 19:53:05 2012] Source is confused with source 26 [Thu Mar 8 19:54:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Thu Mar 8 19:54:10 2012] Initial guess for spatial extent in simple fitting = 19.83" [Thu Mar 8 19:54:10 2012] source mask rpix=4.6, npix_max = 102, mask sum = 100, frac = 0.977 [Thu Mar 8 19:54:10 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 19.83" [Fri Mar 9 08:39:44 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src23.ximg exists [Fri Mar 9 08:39:44 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src23_1.ximg exists [Fri Mar 9 08:39:44 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src23 appears to have run properly [Fri Mar 9 08:39:47 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists [Fri Mar 9 08:39:47 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists [Fri Mar 9 08:39:47 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly [Fri Mar 9 19:36:32 2012] Warning, spatial fit 23 centroid is now closest to src. 9 [Fri Mar 9 19:36:32 2012] Source 24 is offset by -4.081485 and 5.754721 pixels which is larger than 2 X fitted extent = 3.037475 x 11.167541, not incorporating fit results [Fri Mar 9 19:36:32 2012] Vigneting correction estimate = 1.000000 [Fri Mar 9 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Mar 9 19:36:32 2012] Assessing source extent using major axis lower bound [Fri Mar 9 19:36:32 2012] Source does appear to be extended [Fri Mar 9 19:36:32 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Mar 9 19:37:50 2012] XMMSAS src. selection expression = ellipse(17636.210000, 40265.378000, 1189.572034, 1189.572034, 0.000000, X, Y) [Fri Mar 9 19:37:50 2012] Writing source region out to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src24_src.reg [Fri Mar 9 19:37:50 2012] Extracting stamp from image fullrun_pn_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (135, 395) - (272, 532) [Fri Mar 9 19:37:50 2012] XMMSAS bgd. selection expression = annulus(17636.210000, 40265.378000, 1982.620057, 3965.240114, X, Y) && !ellipse(16455.164764, 42793.697906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16356.547684, 43203.432648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15903.548000, 43600.686000, 852.016025, 852.016025, 0.000000, X, Y) && !ellipse(17438.578323, 42919.981720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17886.079000, 42054.194000, 2233.008064, 289.657608, 239.977000, X, Y) && !ellipse(16903.969589, 43839.994507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18309.614200, 43392.024000, 917.608026, 917.608026, 0.000000, X, Y) && !ellipse(13742.443008, 42486.311890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18869.802399, 42408.038971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18185.516000, 41545.664000, 414.756012, 414.756012, 0.000000, X, Y) && !ellipse(13794.401932, 41719.542084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14105.901917, 41356.519928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18474.965027, 41094.858826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19922.824000, 40640.620000, 1690.608049, 1690.608049, 0.000000, X, Y) && !ellipse(17276.828000, 40768.952000, 1659.024048, 1659.024048, 0.000000, X, Y) && !ellipse(19012.550049, 40345.670624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20276.586000, 40208.288000, 675.856819, 675.856819, 0.000000, X, Y) && !ellipse(20521.363600, 39865.803600, 1002.992029, 1002.992029, 0.000000, X, Y) && !ellipse(18245.708760, 39390.475400, 2053.416059, 478.498414, 55.433100, X, Y) && !ellipse(21275.420898, 38825.690247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18620.003200, 38846.987800, 1943.152056, 460.004813, 53.944700, X, Y) && !ellipse(20116.233780, 38750.882141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21799.402000, 38256.392000, 2281.408066, 468.295213, 49.864000, X, Y) && !ellipse(18877.682000, 38514.354000, 1579.408045, 1579.408045, 0.000000, X, Y) && !ellipse(20682.933853, 38082.972351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22276.635101, 37700.873810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21490.516769, 37181.518219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19781.185013, 37255.105011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22737.804000, 37188.990000, 1850.864053, 1850.864053, 0.000000, X, Y) && !ellipse(20219.122640, 36762.032140, 1836.968053, 417.407212, 49.344000, X, Y) && !ellipse(22405.110600, 36119.491000, 832.400024, 832.400024, 0.000000, X, Y) && !ellipse(21481.658264, 35448.811584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23185.406180, 35460.872200, 1689.648049, 273.804808, 41.645000, X, Y) && !ellipse(22100.872000, 34727.526000, 1628.616047, 1628.616047, 0.000000, X, Y) && !ellipse(17972.285675, 43841.648590, 870.000000, 870.000000, 0.000000, X, Y) [Fri Mar 9 19:37:50 2012] Writing fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src24.gif [Fri Mar 9 20:01:22 2012] Mean detx,y = (-9409.53, -12824.80) [Fri Mar 9 20:01:28 2012] Setting backscal keywords in source and bgd. spectrum [Fri Mar 9 20:02:19 2012] Binned source spectrum to 10 counts/bin [Fri Mar 9 20:02:20 2012] Setting source spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src24_src_b10.pi.gz [Fri Mar 9 20:02:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src24_bgd.pi.gz [Sat Mar 10 04:28:26 2012] Updating aperture counts using extracted products [Sat Mar 10 04:28:26 2012] Error reading totcts from fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src24_src_b10.pi.gz [Sat Mar 10 04:28:30 2012] Calculating source flux in energy range 0.30-8.00 [Sat Mar 10 04:28:30 2012] Using photon index=1.80, rate=0.0219, arf fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src24.arf [Sat Mar 10 04:28:30 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Mar 10 04:28:30 2012] Updating source flux to 1.8e-13 [Sat Mar 10 04:43:09 2012] Flag b found in src. 24 procflags, skipping spectral fitting [Sat Mar 10 04:43:09 2012] Flag c found in src. 24 procflags, skipping spectral fitting