[Thu Mar  8 00:54:57 2012] Detection parameters:
  Position = (233.9, 462.1) = 18 4 26.43 -21 27 38.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 224.1 +/- 22.2
  Background counts = 55.9
  Rate = 0.007 +/- 0.0007

[Thu Mar  8 00:54:58 2012] Off-axis axis estimate = 12.75'
[Thu Mar  8 00:58:45 2012] Using EEF radius (= 12.80 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:58:45 2012] Initial guess for spatial extent in simple fitting = 12.80"
[Thu Mar  8 00:58:45 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.033
[Thu Mar  8 00:58:45 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 12.80"
[Thu Mar  8 09:35:03 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src23.ximg exists
[Thu Mar  8 09:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src23.csv
[Thu Mar  8 09:35:03 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Mar  8 09:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src23.csv
[Thu Mar  8 09:35:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 09:35:05 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Mar  8 09:35:05 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Mar  8 09:35:05 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Mar  8 19:53:05 2012] Warning, spatial fit 23 centroid is now closest to src. 19
[Thu Mar  8 19:53:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:05 2012] Assessing source extent using major
[Thu Mar  8 19:53:05 2012] Source does appear to be extended
[Thu Mar  8 19:53:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:05 2012] Source is confused with source 19
[Thu Mar  8 19:54:10 2012] Using EEF radius (= 12.80 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 19:54:10 2012] Initial guess for spatial extent in simple fitting = 12.80"
[Thu Mar  8 19:54:10 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.033
[Thu Mar  8 19:54:10 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 12.80"
[Fri Mar  9 08:39:44 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src22.ximg exists
[Fri Mar  9 08:39:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src22.csv
[Fri Mar  9 08:39:44 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri Mar  9 08:39:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src22.csv
[Fri Mar  9 08:39:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 08:39:47 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri Mar  9 08:39:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Fri Mar  9 08:39:47 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Mar  9 08:39:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Fri Mar  9 08:39:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:36:32 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 13.805716 pixels away
[Fri Mar  9 19:36:32 2012] Spatial fit model total counts = 32857.700000, observed total counts = 1342.000000
[Fri Mar  9 19:36:32 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar  9 19:36:32 2012] Spatial fit model total counts = 1219.810000, observed total counts = 1110.000000
[Fri Mar  9 19:36:32 2012] Offset between fit and detection position for source 23 = 0.709298 pixels
[Fri Mar  9 19:36:32 2012] Warning, changing simple spatial fit ID from 22 to 24
[Fri Mar  9 19:36:32 2012] 1044.627000 total counts/ 826.479000 bgd. counts: snr = 7.588140
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.709298 pixels
  Position = (233.6, 462.7) = 18 4 26.52 -21 27 37.0
  Extent = 8.4 (7.2-10.4)", rotation angle = 0
  Source counts = 218.1 +/- 32.3
  Background counts = 826.5
  Rate = 0.007 +/- 0.001
[Fri Mar  9 19:36:32 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:32 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:36:32 2012] Source does appear to be extended
[Fri Mar  9 19:36:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:37:50 2012] XMMSAS src. selection expression = ellipse(20276.586000, 40208.288000, 506.892615, 506.892615, 0.000000, X, Y)
[Fri Mar  9 19:37:50 2012] Writing source region out to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src23_src.reg
[Fri Mar  9 19:37:50 2012] Extracting stamp from image fullrun_pn_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (204, 434) - (263, 492)
[Fri Mar  9 19:37:50 2012] XMMSAS bgd. selection expression = annulus(20276.586000, 40208.288000, 844.821024, 1689.642049, X, Y) && !ellipse(17886.079000, 42054.194000, 2233.008064, 289.657608, 239.977000, X, Y) && !ellipse(18869.802399, 42408.038971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18185.516000, 41545.664000, 414.756012, 414.756012, 0.000000, X, Y) && !ellipse(18474.965027, 41094.858826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19922.824000, 40640.620000, 1690.608049, 1690.608049, 0.000000, X, Y) && !ellipse(17276.828000, 40768.952000, 1659.024048, 1659.024048, 0.000000, X, Y) && !ellipse(19012.550049, 40345.670624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17636.210000, 40265.378000, 1586.096046, 1586.096046, 0.000000, X, Y) && !ellipse(20521.363600, 39865.803600, 1002.992029, 1002.992029, 0.000000, X, Y) && !ellipse(18245.708760, 39390.475400, 2053.416059, 478.498414, 55.433100, X, Y) && !ellipse(21275.420898, 38825.690247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18620.003200, 38846.987800, 1943.152056, 460.004813, 53.944700, X, Y) && !ellipse(20116.233780, 38750.882141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21799.402000, 38256.392000, 2281.408066, 468.295213, 49.864000, X, Y) && !ellipse(18877.682000, 38514.354000, 1579.408045, 1579.408045, 0.000000, X, Y) && !ellipse(20682.933853, 38082.972351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22276.635101, 37700.873810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23698.546000, 38082.522000, 1796.648052, 1796.648052, 0.000000, X, Y) && !ellipse(22737.804000, 37188.990000, 1850.864053, 1850.864053, 0.000000, X, Y) && !ellipse(20219.122640, 36762.032140, 1836.968053, 417.407212, 49.344000, X, Y)
[Fri Mar  9 19:37:50 2012] Writing fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src23.gif
[Fri Mar  9 20:00:23 2012] Mean detx,y = (-6854.52, -12751.57) 
[Fri Mar  9 20:00:29 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 20:00:55 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 20:00:56 2012] Setting source spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Mar  9 20:00:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Mar 10 04:28:26 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:26 2012] Error reading totcts from fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Mar 10 04:28:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:30 2012] Using photon index=1.80, rate=0.00747, arf fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src23.arf
[Sat Mar 10 04:28:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:30 2012] Updating source flux to 6.4e-14
[Sat Mar 10 04:43:09 2012] Flag p found in src. 23 procflags, skipping spectral fitting
[Sat Mar 10 04:43:09 2012] Flag c found in src. 23 procflags, skipping spectral fitting