[Thu Mar  8 00:54:56 2012] Detection parameters:
  Position = (212.4, 495.0) = 18 4 33.12 -21 25 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.4 +/- 20.7
  Background counts = 55.3
  Rate = 0.006 +/- 0.0007

[Thu Mar  8 00:54:58 2012] Off-axis axis estimate = 15.56'
[Thu Mar  8 00:58:45 2012] Using EEF radius (= 14.21 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:58:45 2012] Initial guess for spatial extent in simple fitting = 14.21"
[Thu Mar  8 00:58:45 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.987
[Thu Mar  8 00:58:45 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 14.21"
[Thu Mar  8 09:35:02 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src11.ximg exists
[Thu Mar  8 09:35:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src11.csv
[Thu Mar  8 09:35:02 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Mar  8 09:35:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src11.csv
[Thu Mar  8 09:35:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 09:35:05 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Mar  8 09:35:05 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Mar  8 09:35:05 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Mar  8 19:53:05 2012] Spatial fit model total counts = 1561.650000, observed total counts = 1552.000000
[Thu Mar  8 19:53:05 2012] Offset between fit and detection position for source 11 = 4.549585 pixels
[Thu Mar  8 19:53:05 2012] 1165.425000 total counts/ 837.596000 bgd. counts: snr = 11.327396
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 4.549585 pixels
  Position = (211.0, 499.3) = 18 4 33.55 -21 24 57.7
  Extent = 11.5 (9.6-14.7)", rotation angle = 0
  Source counts = 327.8 +/- 34.1
  Background counts = 837.6
  Rate = 0.01 +/- 0.001
[Thu Mar  8 19:53:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:05 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 19:53:05 2012] Source does appear to be extended
[Thu Mar  8 19:53:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:05 2012] Source is confused with source 8
[Thu Mar  8 19:53:05 2012] Source is confused with source 114
[Thu Mar  8 19:54:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 19:54:10 2012] Initial guess for spatial extent in simple fitting = 11.47"
[Thu Mar  8 19:54:10 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.915
[Thu Mar  8 19:54:10 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 11.47"
[Fri Mar  9 08:39:44 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src11.ximg exists
[Fri Mar  9 08:39:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src11.csv
[Fri Mar  9 08:39:44 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Mar  9 08:39:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src11.csv
[Fri Mar  9 08:39:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 08:39:47 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Mar  9 08:39:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri Mar  9 08:39:47 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Mar  9 08:39:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri Mar  9 08:39:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:36:32 2012] Warning, spatial fit 11 centroid is now closest to src. 10
[Fri Mar  9 19:36:32 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:32 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:36:32 2012] Source does appear to be extended
[Fri Mar  9 19:36:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:37:49 2012] XMMSAS src. selection expression = ellipse(18309.614200, 43392.024000, 688.206020, 688.206020, 0.000000, X, Y)
[Fri Mar  9 19:37:49 2012] Writing source region out to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src11_src.reg
[Fri Mar  9 19:37:49 2012] Extracting stamp from image fullrun_pn_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (171, 460) - (251, 539)
[Fri Mar  9 19:37:49 2012] XMMSAS bgd. selection expression = annulus(18309.614200, 43392.024000, 1147.010033, 2294.020066, X, Y) && !ellipse(16455.164764, 42793.697906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16356.547684, 43203.432648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15903.548000, 43600.686000, 852.016025, 852.016025, 0.000000, X, Y) && !ellipse(17438.578323, 42919.981720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17886.079000, 42054.194000, 2233.008064, 289.657608, 239.977000, X, Y) && !ellipse(16903.969589, 43839.994507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18869.802399, 42408.038971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18185.516000, 41545.664000, 414.756012, 414.756012, 0.000000, X, Y) && !ellipse(18474.965027, 41094.858826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19922.824000, 40640.620000, 1690.608049, 1690.608049, 0.000000, X, Y) && !ellipse(17276.828000, 40768.952000, 1659.024048, 1659.024048, 0.000000, X, Y) && !ellipse(19012.550049, 40345.670624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17636.210000, 40265.378000, 1586.096046, 1586.096046, 0.000000, X, Y) && !ellipse(18245.708760, 39390.475400, 2053.416059, 478.498414, 55.433100, X, Y) && !ellipse(17972.285675, 43841.648590, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 19:37:49 2012] Writing fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src11.gif
[Fri Mar  9 19:49:31 2012] Mean detx,y = (-8857.21, -15915.58) 
[Fri Mar  9 19:49:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 19:49:58 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 19:49:58 2012] Setting source spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Mar  9 19:49:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Mar 10 04:28:25 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:26 2012] Error reading totcts from fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Mar 10 04:28:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:29 2012] Using photon index=1.80, rate=0.0112, arf fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src11.arf
[Sat Mar 10 04:28:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:29 2012] Updating source flux to 1e-13
[Sat Mar 10 04:43:09 2012] Flag c found in src. 11 procflags, skipping spectral fitting