[Thu Mar  8 00:54:58 2012] Detection parameters:
  Position = (450.5, 303.1) = 18 3 18.88 -21 39 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.4 +/- 20.2
  Background counts = 61.7
  Rate = 0.006 +/- 0.0007

[Thu Mar  8 00:54:58 2012] Off-axis axis estimate = 11.03'
[Thu Mar  8 00:58:45 2012] Using EEF radius (= 11.94 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:58:45 2012] Initial guess for spatial extent in simple fitting = 11.94"
[Thu Mar  8 00:58:45 2012] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.997
[Thu Mar  8 00:58:45 2012] Giving source the simple spatial ID 101 for pass 0, mean size = 11.94"
[Thu Mar  8 19:53:05 2012] Spatial fit model total counts = 1262.470000, observed total counts = 1269.000000
[Thu Mar  8 19:53:05 2012] Offset between fit and detection position for source 103 = 3.419492 pixels
[Thu Mar  8 19:53:05 2012] Warning, changing simple spatial fit ID from 101 to 98
[Thu Mar  8 19:53:05 2012] 1275.465000 total counts/ 973.558000 bgd. counts: snr = 9.675920
Spatial fit parameters:
  Offset between fit and detection position for source 103 = 3.419492 pixels
  Position = (453.0, 305.4) = 18 3 18.10 -21 39 0.9
  Extent = 24.1 (24.1-48.2)", rotation angle = 0
  Source counts = 301.9 +/- 35.7
  Background counts = 973.6
  Rate = 0.01 +/- 0.001
[Thu Mar  8 19:53:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:05 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 19:53:05 2012] Source does appear to be extended
[Thu Mar  8 19:53:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:05 2012] Source is confused with source 94
[Thu Mar  8 19:54:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 19:54:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar  8 19:54:10 2012] Initial guess for spatial extent in simple fitting = 24.11"
[Thu Mar  8 19:54:10 2012] source mask rpix=5.5, npix_max = 146, mask sum = 144, frac = 0.986
[Thu Mar  8 19:54:10 2012] Giving source the simple spatial ID 100 for pass 1, mean size = 24.11"
[Fri Mar  9 08:39:46 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src100.ximg exists
[Fri Mar  9 08:39:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src100.csv
[Fri Mar  9 08:39:46 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src100_1.ximg exists
[Fri Mar  9 08:39:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src100.csv
[Fri Mar  9 08:39:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src100_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 08:39:49 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src100.ximg exists
[Fri Mar  9 08:39:49 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src100_1.ximg exists
[Fri Mar  9 08:39:49 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src100 appears to have run properly
[Fri Mar  9 19:36:32 2012] Warning, spatial fit 100 centroid is now closest to src. 96
[Fri Mar  9 19:36:32 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:32 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:36:32 2012] Source does appear to be extended
[Fri Mar  9 19:36:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:37:53 2012] XMMSAS src. selection expression = ellipse(39360.786600, 26522.766000, 1446.828042, 1446.828042, 0.000000, X, Y)
[Fri Mar  9 19:37:53 2012] Writing source region out to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src103_src.reg
[Fri Mar  9 19:37:53 2012] Extracting stamp from image fullrun_pn_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (370, 222) - (536, 389)
[Fri Mar  9 19:37:54 2012] XMMSAS bgd. selection expression = annulus(39360.786600, 26522.766000, 2411.380069, 4822.760139, X, Y) && !ellipse(40710.750427, 28625.739410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33276.850200, 30104.686000, 1451.904042, 398.626411, 21.057700, X, Y) && !ellipse(37808.750305, 28838.261230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39006.970000, 28451.552000, 1929.104056, 1929.104056, 0.000000, X, Y) && !ellipse(39640.919647, 27936.655762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38103.652374, 28023.615936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40104.118000, 28502.604000, 1454.088042, 1454.088042, 0.000000, X, Y) && !ellipse(38963.865936, 27984.342743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40658.589722, 27862.662750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39336.446198, 27446.470978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37256.542000, 26565.640200, 1762.080051, 1762.080051, 0.000000, X, Y) && !ellipse(37744.769409, 26509.468658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40703.905762, 26218.477448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40202.553925, 26213.743530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39538.260284, 26247.881897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37728.143616, 23895.470184, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 19:37:54 2012] Writing fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src103.gif
[Fri Mar  9 21:10:28 2012] Mean detx,y = (12465.83, 692.84) 
[Fri Mar  9 21:10:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 21:11:42 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 21:11:43 2012] Setting source spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src103_src_b10.pi.gz
[Fri Mar  9 21:11:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src103_bgd.pi.gz
[Sat Mar 10 04:28:28 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:28 2012] Error reading totcts from fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src103_src_b10.pi.gz
[Sat Mar 10 04:28:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:33 2012] Using photon index=1.80, rate=0.0103, arf fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src103.arf
[Sat Mar 10 04:28:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:33 2012] Updating source flux to 4.6e-14
[Sat Mar 10 04:43:09 2012] Flag c found in src. 103 procflags, skipping spectral fitting