[Thu Mar  8 00:54:58 2012] Detection parameters:
  Position = (425.1, 307.1) = 18 3 26.79 -21 38 53.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.6 +/- 19.2
  Background counts = 63.2
  Rate = 0.008 +/- 0.001

[Thu Mar  8 00:54:58 2012] Off-axis axis estimate = 9.21'
[Thu Mar  8 00:58:45 2012] Using EEF radius (= 11.03 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:58:45 2012] Initial guess for spatial extent in simple fitting = 11.03"
[Thu Mar  8 00:58:45 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.976
[Thu Mar  8 00:58:45 2012] Giving source the simple spatial ID 100 for pass 0, mean size = 11.03"
[Thu Mar  8 09:35:05 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src100.ximg exists
[Thu Mar  8 09:35:05 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src100_1.ximg exists
[Thu Mar  8 09:35:05 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src100 appears to have run properly
[Thu Mar  8 09:35:07 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Thu Mar  8 09:35:07 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Thu Mar  8 09:35:07 2012] Fit fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src100 appears to have run properly
[Thu Mar  8 19:53:05 2012] Spatial fit model total counts = 1359.000000, observed total counts = 1359.000000
[Thu Mar  8 19:53:05 2012] Offset between fit and detection position for source 102 = 3.846627 pixels
[Thu Mar  8 19:53:05 2012] 1345.661000 total counts/ 788.463000 bgd. counts: snr = 19.843528
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 3.846627 pixels
  Position = (428.8, 305.9) = 18 3 25.65 -21 38 58.9
  Extent = 22.0 (22.0-22.1)", rotation angle = 0
  Source counts = 557.2 +/- 36.7
  Background counts = 788.5
  Rate = 0.02 +/- 0.001
[Thu Mar  8 19:53:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:05 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 19:53:05 2012] Source does appear to be extended
[Thu Mar  8 19:53:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:05 2012] Source is confused with source 104
[Thu Mar  8 19:54:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 19:54:10 2012] Initial guess for spatial extent in simple fitting = 22.03"
[Thu Mar  8 19:54:10 2012] source mask rpix=5.1, npix_max = 123, mask sum = 121, frac = 0.977
[Thu Mar  8 19:54:10 2012] Giving source the simple spatial ID 99 for pass 1, mean size = 22.03"
[Fri Mar  9 08:39:46 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src99.ximg exists
[Fri Mar  9 08:39:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src99.csv
[Fri Mar  9 08:39:46 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src99_1.ximg exists
[Fri Mar  9 08:39:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src99.csv
[Fri Mar  9 08:39:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src99_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 08:39:49 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src99.ximg exists
[Fri Mar  9 08:39:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src99.csv
[Fri Mar  9 08:39:49 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src99_1.ximg exists
[Fri Mar  9 08:39:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src99.csv
[Fri Mar  9 08:39:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src99_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:36:32 2012] Warning, spatial fit 99 centroid is now closest to src. 95
[Fri Mar  9 19:36:32 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:32 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:36:32 2012] Source does appear to be extended
[Fri Mar  9 19:36:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:37:53 2012] XMMSAS src. selection expression = ellipse(37256.542000, 26565.640200, 1321.560038, 1321.560038, 0.000000, X, Y)
[Fri Mar  9 19:37:53 2012] Writing source region out to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src102_src.reg
[Fri Mar  9 19:37:53 2012] Extracting stamp from image fullrun_pn_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (353, 230) - (505, 382)
[Fri Mar  9 19:37:53 2012] XMMSAS bgd. selection expression = annulus(37256.542000, 26565.640200, 2202.600063, 4405.200127, X, Y) && !ellipse(40710.750427, 28625.739410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32044.038780, 30595.099000, 1543.704044, 372.309611, 23.395000, X, Y) && !ellipse(32181.460000, 30536.321200, 702.853620, 702.853620, 0.000000, X, Y) && !ellipse(31607.506600, 29964.449000, 1501.184043, 276.616008, 21.140000, X, Y) && !ellipse(33276.850200, 30104.686000, 1451.904042, 398.626411, 21.057700, X, Y) && !ellipse(32288.104000, 29686.846000, 1341.112039, 261.793608, 24.953000, X, Y) && !ellipse(33223.769685, 29331.508271, 881.048025, 407.110023, 206.315983, X, Y) && !ellipse(33470.092000, 29246.404800, 440.522413, 440.522413, 0.000000, X, Y) && !ellipse(37808.750305, 28838.261230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39006.970000, 28451.552000, 1929.104056, 1929.104056, 0.000000, X, Y) && !ellipse(39640.919647, 27936.655762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38103.652374, 28023.615936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40104.118000, 28502.604000, 1454.088042, 1454.088042, 0.000000, X, Y) && !ellipse(38963.865936, 27984.342743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40658.589722, 27862.662750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32513.291718, 27867.680756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39336.446198, 27446.470978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39360.786600, 26522.766000, 1929.104056, 1929.104056, 0.000000, X, Y) && !ellipse(37744.769409, 26509.468658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40703.905762, 26218.477448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40202.553925, 26213.743530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39538.260284, 26247.881897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32774.342163, 24700.652954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37728.143616, 23895.470184, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 19:37:53 2012] Writing fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src102.gif
[Fri Mar  9 21:09:11 2012] Mean detx,y = (10253.78, 740.99) 
[Fri Mar  9 21:09:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 21:10:05 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 21:10:06 2012] Setting source spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Fri Mar  9 21:10:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Sat Mar 10 04:28:28 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:28 2012] Error reading totcts from fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Sat Mar 10 04:28:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:33 2012] Using photon index=1.80, rate=0.0191, arf fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src102.arf
[Sat Mar 10 04:28:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:33 2012] Updating source flux to 7.2e-14
[Sat Mar 10 04:43:09 2012] Flag c found in src. 102 procflags, skipping spectral fitting