[Thu Mar  8 00:54:56 2012] Detection parameters:
  Position = (468.5, 329.6) = 18 3 13.27 -21 37 36.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1073.1 +/- 102.0
  Background counts = 53.1
  Rate = 0.04 +/- 0.003

[Thu Mar  8 00:54:58 2012] Off-axis axis estimate = 12.53'
[Thu Mar  8 00:58:45 2012] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:58:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar  8 00:58:45 2012] Initial guess for spatial extent in simple fitting = 12.70"
[Thu Mar  8 00:58:45 2012] source mask rpix=2.9, npix_max = 46, mask sum = 29, frac = 0.620
[Thu Mar  8 00:58:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.70"
[Thu Mar  8 09:35:02 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar  8 09:35:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src1.csv
[Thu Mar  8 09:35:02 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar  8 09:35:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src1.csv
[Thu Mar  8 09:35:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 09:35:05 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar  8 09:35:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Mar  8 09:35:05 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar  8 09:35:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Mar  8 09:35:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:53:05 2012] Warning, spatial fit 1 centroid is now closest to src. 94
[Thu Mar  8 19:53:05 2012] Spatial fit model total counts = 1708.610000, observed total counts = 1436.000000
[Thu Mar  8 19:53:05 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar  8 19:53:05 2012] Spatial fit model total counts = 1533.320000, observed total counts = 957.000000
[Thu Mar  8 19:53:05 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar  8 19:53:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:05 2012] Assessing source extent using major
[Thu Mar  8 19:53:05 2012] Source does appear to be extended
[Thu Mar  8 19:53:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:54:10 2012] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 19:54:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar  8 19:54:10 2012] Initial guess for spatial extent in simple fitting = 12.70"
[Thu Mar  8 19:54:10 2012] source mask rpix=2.9, npix_max = 46, mask sum = 29, frac = 0.620
[Thu Mar  8 19:54:10 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.70"
[Fri Mar  9 08:39:44 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Mar  9 08:39:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src1.csv
[Fri Mar  9 08:39:44 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Mar  9 08:39:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src1.csv
[Fri Mar  9 08:39:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 08:39:46 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Mar  9 08:39:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Mar  9 08:39:46 2012] fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Mar  9 08:39:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Mar  9 08:39:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:36:32 2012] Warning, spatial fit 1 centroid is now closest to src. 94
[Fri Mar  9 19:36:32 2012] Source 1 is offset by 9.023982 and -3.884191 pixels which is larger than
2 X fitted extent = 1.371646 x 1.371646, not incorporating fit results
[Fri Mar  9 19:36:32 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:32 2012] Assessing source extent using major
[Fri Mar  9 19:36:32 2012] Source does appear to be extended
[Fri Mar  9 19:36:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:36:32 2012] Source is confused with source 96
[Fri Mar  9 19:37:49 2012] Counts = 1073.120605, rescaling region sizes by 2.000000
[Fri Mar  9 19:37:49 2012] XMMSAS src. selection expression = ellipse(40710.750427, 28625.739410, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Mar  9 19:37:49 2012] Writing source region out to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src1_src.reg
[Fri Mar  9 19:37:49 2012] Extracting stamp from image fullrun_pn_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (393, 255) - (543, 405)
[Fri Mar  9 19:37:49 2012] XMMSAS bgd. selection expression = annulus(40710.750427, 28625.739410, 4350.000000, 8700.000000, X, Y) && !ellipse(37888.114441, 35558.482880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31757.445400, 36568.011600, 330.122409, 330.122409, 0.000000, X, Y) && !ellipse(38427.778351, 34071.576202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31163.021265, 30985.865988, 1437.440041, 389.565616, 30.652756, X, Y) && !ellipse(32044.038780, 30595.099000, 1543.704044, 372.309611, 23.395000, X, Y) && !ellipse(32181.460000, 30536.321200, 702.853620, 702.853620, 0.000000, X, Y) && !ellipse(31189.451630, 30129.295776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31607.506600, 29964.449000, 1501.184043, 276.616008, 21.140000, X, Y) && !ellipse(33276.850200, 30104.686000, 1451.904042, 398.626411, 21.057700, X, Y) && !ellipse(32288.104000, 29686.846000, 1341.112039, 261.793608, 24.953000, X, Y) && !ellipse(33223.769685, 29331.508271, 881.048025, 407.110023, 206.315983, X, Y) && !ellipse(33470.092000, 29246.404800, 440.522413, 440.522413, 0.000000, X, Y) && !ellipse(37808.750305, 28838.261230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39006.970000, 28451.552000, 1929.104056, 1929.104056, 0.000000, X, Y) && !ellipse(39640.919647, 27936.655762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38103.652374, 28023.615936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40104.118000, 28502.604000, 1454.088042, 1454.088042, 0.000000, X, Y) && !ellipse(38963.865936, 27984.342743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40658.589722, 27862.662750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32513.291718, 27867.680756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39336.446198, 27446.470978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37256.542000, 26565.640200, 1762.080051, 1762.080051, 0.000000, X, Y) && !ellipse(39360.786600, 26522.766000, 1929.104056, 1929.104056, 0.000000, X, Y) && !ellipse(37744.769409, 26509.468658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40703.905762, 26218.477448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40202.553925, 26213.743530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39538.260284, 26247.881897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32774.342163, 24700.652954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37728.143616, 23895.470184, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 19:37:49 2012] Writing fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src1.gif
[Fri Mar  9 19:38:36 2012] Mean detx,y = (13184.42, -1184.64) 
[Fri Mar  9 19:38:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 19:40:48 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 19:40:49 2012] Setting source spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar  9 19:40:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Mar  9 21:20:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar  9 21:20:11 2012] rmf not generated due to insufficient counts
[Sat Mar 10 04:28:25 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:25 2012] Error reading totcts from fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Mar 10 04:28:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:29 2012] Using photon index=1.80, rate=0.0352, arf fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src1.arf
[Sat Mar 10 04:28:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:29 2012] Updating source flux to 2.5e-13
[Sat Mar 10 04:43:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Mar 10 04:53:19 2012] xmm0503170301/analysis//spectral/fullrun_pn_xmm0503170301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete