[Thu Mar  8 00:56:15 2012] Detection parameters:
  Position = (435.0, 317.1) = 18 3 23.73 -21 38 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.7 +/- 12.3
  Background counts = 23.8
  Rate = 0.005 +/- 0.0008

[Thu Mar  8 00:56:15 2012] Off-axis axis estimate = 9.99'
[Thu Mar  8 16:24:25 2012] Using EEF radius (= 11.42 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 16:24:25 2012] Initial guess for spatial extent in simple fitting = 11.42"
[Thu Mar  8 16:24:25 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.921
[Thu Mar  8 16:24:25 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 11.42"
[Thu Mar  8 19:52:25 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src25.ximg exists
[Thu Mar  8 19:52:25 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Mar  8 19:52:25 2012] Fit fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src25 appears to have run properly
[Thu Mar  8 19:52:26 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Mar  8 19:52:26 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Mar  8 19:52:27 2012] Fit fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Thu Mar  8 19:53:39 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 12.817700 pixels away
[Thu Mar  8 19:53:39 2012] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 13.293210 pixels away
[Thu Mar  8 19:53:39 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:39 2012] Assessing source extent using major
[Thu Mar  8 19:53:39 2012] Source does appear to be extended
[Thu Mar  8 19:53:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:39 2012] Source is confused with source 10
[Fri Mar  9 13:52:02 2012] Using EEF radius (= 11.42 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 13:52:02 2012] Initial guess for spatial extent in simple fitting = 11.42"
[Fri Mar  9 13:52:02 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.921
[Fri Mar  9 13:52:02 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 11.42"
[Fri Mar  9 19:35:50 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src24.ximg exists
[Fri Mar  9 19:35:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src24.csv
[Fri Mar  9 19:35:50 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src24_1.ximg exists
[Fri Mar  9 19:35:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src24.csv
[Fri Mar  9 19:35:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:35:52 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Fri Mar  9 19:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Fri Mar  9 19:35:52 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Fri Mar  9 19:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Fri Mar  9 19:35:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:37:12 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 12.938264 pixels away
[Fri Mar  9 19:37:12 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 13.498431 pixels away
[Fri Mar  9 19:37:12 2012] Source 52 is offset by 2.196329 and 9.625881 pixels which is larger than
2 X fitted extent = 4.115701 x 4.115701, not incorporating fit results
[Fri Mar  9 19:37:12 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:37:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:37:12 2012] Assessing source extent using major
[Fri Mar  9 19:37:12 2012] Source does appear to be extended
[Fri Mar  9 19:37:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 01:49:33 2012] XMMSAS src. selection expression = ellipse(37792.400635, 27541.077637, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 10 01:49:33 2012] Writing source region out to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src52_src.reg
[Sat Mar 10 01:49:33 2012] Extracting stamp from image fullrun_mos2_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (397, 280) - (472, 355)
[Sat Mar 10 01:49:33 2012] XMMSAS bgd. selection expression = annulus(37792.400635, 27541.077637, 1087.500000, 2175.000000, X, Y) && !ellipse(37762.921800, 26967.828680, 958.880028, 958.880028, 0.000000, X, Y) && !ellipse(40011.543152, 26744.916656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39188.890289, 25094.964630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37069.156000, 25437.317800, 807.312023, 807.312023, 0.000000, X, Y) && !ellipse(36884.176200, 25268.020000, 1280.032037, 1280.032037, 0.000000, X, Y) && !ellipse(39815.243000, 25045.042960, 636.262418, 636.262418, 0.000000, X, Y) && !ellipse(40355.311035, 27165.513123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36878.289978, 25930.013824, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 10 01:49:33 2012] Writing fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src52.gif
[Sat Mar 10 02:22:44 2012] Mean detx,y = (-10657.31, 51.89) 
[Sat Mar 10 02:22:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 02:22:55 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 02:22:55 2012] Setting source spectrum file to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sat Mar 10 02:22:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sat Mar 10 03:31:56 2012] Not generating rmf since there are only 75 counts
[Sat Mar 10 03:31:56 2012] rmf not generated due to insufficient counts
[Sat Mar 10 04:28:43 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:43 2012] Error reading totcts from fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sat Mar 10 04:28:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:46 2012] Using photon index=1.80, rate=0.00466, arf fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src52.arf
[Sat Mar 10 04:28:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:46 2012] Updating source flux to 8.2e-14
[Sat Mar 10 04:33:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting