[Thu Mar  8 00:56:13 2012] Detection parameters:
  Position = (219.9, 430.0) = 18 4 30.80 -21 29 58.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.2 +/- 18.5
  Background counts = 37.8
  Rate = 0.005 +/- 0.0006

[Thu Mar  8 00:56:15 2012] Off-axis axis estimate = 11.11'
[Thu Mar  8 16:24:25 2012] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 16:24:25 2012] Initial guess for spatial extent in simple fitting = 11.98"
[Thu Mar  8 16:24:25 2012] source mask rpix=2.8, npix_max = 42, mask sum = 35, frac = 0.826
[Thu Mar  8 16:24:25 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 11.98"
[Thu Mar  8 19:52:25 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src23.ximg exists
[Thu Mar  8 19:52:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src23.csv
[Thu Mar  8 19:52:25 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Mar  8 19:52:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src23.csv
[Thu Mar  8 19:52:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:52:26 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Mar  8 19:52:26 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Mar  8 19:52:26 2012] Fit fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Mar  8 19:53:39 2012] Spatial fit model total counts = 935.228000, observed total counts = 921.000000
[Thu Mar  8 19:53:39 2012] Offset between fit and detection position for source 5 = 1.958057 pixels
[Thu Mar  8 19:53:39 2012] Warning, changing simple spatial fit ID from 23 to 21
[Thu Mar  8 19:53:39 2012] 932.953006 total counts/ 0.296006 bgd. counts: snr = 1714.240286
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.958057 pixels
  Position = (218.0, 430.6) = 18 4 31.38 -21 29 56.5
  Extent = 23.5 (23.5-23.5)", rotation angle = 0
  Source counts = 932.7 +/- 30.5
  Background counts = 0.3
  Rate = 0.03 +/- 0.001
[Thu Mar  8 19:53:39 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:39 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 19:53:39 2012] Source does appear to be extended
[Thu Mar  8 19:53:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:39 2012] Source is confused with source 6
[Fri Mar  9 13:52:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar  9 13:52:02 2012] Initial guess for spatial extent in simple fitting = 23.51"
[Fri Mar  9 13:52:02 2012] source mask rpix=5.4, npix_max = 139, mask sum = 142, frac = 1.018
[Fri Mar  9 13:52:02 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 23.51"
[Fri Mar  9 19:35:50 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src22.ximg exists
[Fri Mar  9 19:35:50 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri Mar  9 19:35:50 2012] Fit fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src22 appears to have run properly
[Fri Mar  9 19:35:52 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri Mar  9 19:35:52 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Mar  9 19:35:52 2012] Fit fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Fri Mar  9 19:37:12 2012] Spatial fit model total counts = 2620.850000, observed total counts = 2602.000000
[Fri Mar  9 19:37:12 2012] Offset between fit and detection position for source 5 = 2.473541 pixels
[Fri Mar  9 19:37:12 2012] 2670.557000 total counts/ 1847.360000 bgd. counts: snr = 19.152612
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.473541 pixels
  Position = (217.9, 433.1) = 18 4 31.42 -21 29 45.7
  Extent = 47.0 (46.5-94.0)", rotation angle = 52 (52-53) degrees
  Source counts = 823.2 +/- 51.7
  Background counts = 1847.4
  Rate = 0.03 +/- 0.002
[Fri Mar  9 19:37:12 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:37:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:37:12 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:37:12 2012] Source does appear to be extended
[Fri Mar  9 19:37:12 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 7.79
[Fri Mar  9 19:37:12 2012] Source is asymmetric
[Sat Mar 10 01:49:33 2012] XMMSAS src. selection expression = ellipse(18908.145800, 37632.424000, 2821.044081, 352.630810, 52.395300, X, Y)
[Sat Mar 10 01:49:33 2012] Writing source region out to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src5_src.reg
[Sat Mar 10 01:49:33 2012] Extracting stamp from image fullrun_mos2_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (56, 271) - (380, 595)
[Sat Mar 10 01:49:33 2012] XMMSAS bgd. selection expression = annulus(18908.145800, 37632.424000, 4701.740135, 9403.480271, X, Y) && !ellipse(16909.460190, 40489.400635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22558.070862, 33677.219391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17370.011460, 39866.499380, 2271.720065, 283.964808, 238.618000, X, Y) && !ellipse(18064.570000, 38763.384000, 2062.232059, 2062.232059, 0.000000, X, Y) && !ellipse(23172.301460, 33232.387400, 531.824015, 531.824015, 0.000000, X, Y) && !ellipse(17486.386000, 39764.324000, 2911.480084, 2911.480084, 0.000000, X, Y) && !ellipse(19571.322000, 36903.294000, 3034.560087, 3034.560087, 0.000000, X, Y) && !ellipse(20040.166000, 36190.568000, 793.383223, 793.383223, 0.000000, X, Y) && !ellipse(28219.939100, 30019.749400, 1334.256038, 1334.256038, 0.000000, X, Y) && !ellipse(25155.890000, 31713.212000, 572.368816, 572.368816, 0.000000, X, Y) && !ellipse(24345.891400, 36901.572600, 747.300022, 222.032006, 33.666000, X, Y) && !ellipse(25951.920200, 31298.116000, 1404.448040, 1404.448040, 0.000000, X, Y) && !ellipse(23253.404000, 36277.184400, 1479.872043, 1479.872043, 0.000000, X, Y) && !ellipse(20500.257217, 35711.510803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28757.675200, 31486.370600, 625.639218, 625.639218, 0.000000, X, Y) && !ellipse(19156.702209, 41965.766846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22994.594000, 35068.548000, 1694.120049, 1694.120049, 0.000000, X, Y) && !ellipse(27008.409729, 34419.326630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29215.717200, 31226.644000, 1407.624041, 1407.624041, 0.000000, X, Y) && !ellipse(26023.417755, 33509.195862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20646.970000, 39574.376000, 1965.376057, 1965.376057, 0.000000, X, Y) && !ellipse(26044.727020, 31688.910431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29240.458000, 33263.002000, 1544.656044, 1544.656044, 0.000000, X, Y) && !ellipse(21442.200000, 38555.182000, 3488.864100, 3488.864100, 0.000000, X, Y)
[Sat Mar 10 01:49:33 2012] Writing fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src5.gif
[Sat Mar 10 02:20:15 2012] Mean detx,y = (8219.15, 10221.99) 
[Sat Mar 10 02:20:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 02:22:28 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 02:22:28 2012] Setting source spectrum file to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Mar 10 02:22:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Mar 10 04:28:43 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:43 2012] Error reading totcts from fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Mar 10 04:28:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:46 2012] Using photon index=1.80, rate=0.0257, arf fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src5.arf
[Sat Mar 10 04:28:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:46 2012] Updating source flux to 6.5e-13
[Sat Mar 10 04:33:33 2012] Flag c found in src. 5 procflags, skipping spectral fitting