[Thu Mar  8 00:56:14 2012] Detection parameters:
  Position = (364.2, 339.2) = 18 3 45.82 -21 36 36.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.9 +/- 14.3
  Background counts = 24.7
  Rate = 0.003 +/- 0.0005

[Thu Mar  8 00:56:15 2012] Off-axis axis estimate = 5.61'
[Thu Mar  8 16:24:25 2012] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 16:24:25 2012] Initial guess for spatial extent in simple fitting = 9.23"
[Thu Mar  8 16:24:25 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.909
[Thu Mar  8 16:24:25 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 9.23"
[Thu Mar  8 19:52:25 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src38.ximg exists
[Thu Mar  8 19:52:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src38.csv
[Thu Mar  8 19:52:25 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src38_1.ximg exists
[Thu Mar  8 19:52:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src38.csv
[Thu Mar  8 19:52:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:52:27 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Thu Mar  8 19:52:27 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Thu Mar  8 19:52:27 2012] Fit fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Thu Mar  8 19:53:39 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 12.467614 pixels away
[Thu Mar  8 19:53:39 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:39 2012] Assessing source extent using major
[Thu Mar  8 19:53:39 2012] Source does appear to be extended
[Thu Mar  8 19:53:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:39 2012] Source is confused with source 47
[Fri Mar  9 13:52:02 2012] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 13:52:02 2012] Initial guess for spatial extent in simple fitting = 9.23"
[Fri Mar  9 13:52:02 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.909
[Fri Mar  9 13:52:02 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 9.23"
[Fri Mar  9 19:35:50 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src37.ximg exists
[Fri Mar  9 19:35:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src37.csv
[Fri Mar  9 19:35:50 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src37_1.ximg exists
[Fri Mar  9 19:35:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src37.csv
[Fri Mar  9 19:35:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:35:52 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Fri Mar  9 19:35:52 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Fri Mar  9 19:35:52 2012] Fit fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Fri Mar  9 19:37:12 2012] Warning, spatial fit 37 centroid is now closest to src. 38
[Fri Mar  9 19:37:12 2012] Warning: source 47 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 22.062436 pixels away
[Fri Mar  9 19:37:12 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 33.663313 pixels away
[Fri Mar  9 19:37:12 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:37:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:37:12 2012] Assessing source extent using major
[Fri Mar  9 19:37:12 2012] Source does appear to be extended
[Fri Mar  9 19:37:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 01:49:33 2012] XMMSAS src. selection expression = ellipse(31633.444214, 29462.973694, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 10 01:49:33 2012] Writing source region out to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src44_src.reg
[Sat Mar 10 01:49:33 2012] Extracting stamp from image fullrun_mos2_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (327, 302) - (402, 377)
[Sat Mar 10 01:49:33 2012] XMMSAS bgd. selection expression = annulus(31633.444214, 29462.973694, 1087.500000, 2175.000000, X, Y) && !ellipse(31305.782000, 28550.750400, 663.843219, 295.593609, 220.030000, X, Y) && !ellipse(32387.708000, 28225.753600, 1631.096047, 1631.096047, 0.000000, X, Y) && !ellipse(30020.049200, 28783.597000, 474.757614, 474.757614, 0.000000, X, Y) && !ellipse(28219.939100, 30019.749400, 1334.256038, 1334.256038, 0.000000, X, Y) && !ellipse(29016.968660, 29482.069400, 469.277614, 469.277614, 0.000000, X, Y) && !ellipse(32703.328000, 31039.956000, 1593.048046, 1593.048046, 0.000000, X, Y) && !ellipse(31612.780000, 28532.678000, 1476.552042, 1476.552042, 0.000000, X, Y) && !ellipse(31965.762000, 28859.010000, 1503.784043, 1503.784043, 0.000000, X, Y) && !ellipse(33584.654400, 30911.262400, 783.717623, 783.717623, 0.000000, X, Y) && !ellipse(30202.019000, 32237.012000, 954.504027, 954.504027, 0.000000, X, Y) && !ellipse(29215.717200, 31226.644000, 1407.624041, 1407.624041, 0.000000, X, Y) && !ellipse(30856.876000, 28285.924000, 1991.520057, 1991.520057, 0.000000, X, Y)
[Sat Mar 10 01:49:33 2012] Writing fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src44.gif
[Sat Mar 10 02:26:34 2012] Mean detx,y = (-4471.52, 1986.19) 
[Sat Mar 10 02:26:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 02:26:46 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 02:26:46 2012] Setting source spectrum file to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sat Mar 10 02:26:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sat Mar 10 03:52:40 2012] Not generating rmf since there are only 84 counts
[Sat Mar 10 03:52:40 2012] rmf not generated due to insufficient counts
[Sat Mar 10 04:28:44 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:44 2012] Error reading totcts from fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sat Mar 10 04:28:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:46 2012] Using photon index=1.80, rate=0.00319, arf fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src44.arf
[Sat Mar 10 04:28:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:46 2012] Updating source flux to 4.1e-14
[Sat Mar 10 04:33:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting