[Thu Mar  8 00:56:14 2012] Detection parameters:
  Position = (373.9, 359.8) = 18 3 42.77 -21 35 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.1 +/- 13.3
  Background counts = 22.5
  Rate = 0.003 +/- 0.0006

[Thu Mar  8 00:56:15 2012] Off-axis axis estimate = 7.06'
[Thu Mar  8 16:24:25 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 16:24:25 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Thu Mar  8 16:24:25 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.157
[Thu Mar  8 16:24:25 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 9.96"
[Thu Mar  8 19:52:25 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src35.ximg exists
[Thu Mar  8 19:52:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src35.csv
[Thu Mar  8 19:52:25 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src35_1.ximg exists
[Thu Mar  8 19:52:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src35.csv
[Thu Mar  8 19:52:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:52:27 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Thu Mar  8 19:52:27 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Thu Mar  8 19:52:27 2012] Fit fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Thu Mar  8 19:53:39 2012] Spatial fit model total counts = 398.244000, observed total counts = 398.000000
[Thu Mar  8 19:53:39 2012] Offset between fit and detection position for source 38 = 3.552881 pixels
[Thu Mar  8 19:53:39 2012] 369.656600 total counts/ 98.220600 bgd. counts: snr = 27.388368
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 3.552881 pixels
  Position = (376.5, 357.3) = 18 3 41.99 -21 35 15.4
  Extent = 19.9 (19.9-39.8)", rotation angle = 0
  Source counts = 271.4 +/- 19.2
  Background counts = 98.2
  Rate = 0.008 +/- 0.0006
[Thu Mar  8 19:53:39 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:39 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 19:53:39 2012] Source does appear to be extended
[Thu Mar  8 19:53:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:39 2012] Source is confused with source 41
[Fri Mar  9 13:52:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar  9 13:52:02 2012] Initial guess for spatial extent in simple fitting = 19.91"
[Fri Mar  9 13:52:02 2012] source mask rpix=4.6, npix_max = 103, mask sum = 110, frac = 1.067
[Fri Mar  9 13:52:02 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 19.91"
[Fri Mar  9 19:35:50 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src34.ximg exists
[Fri Mar  9 19:35:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src34.csv
[Fri Mar  9 19:35:50 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src34_1.ximg exists
[Fri Mar  9 19:35:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src34.csv
[Fri Mar  9 19:35:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:35:52 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Fri Mar  9 19:35:52 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Fri Mar  9 19:35:52 2012] Fit fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Fri Mar  9 19:37:12 2012] Warning, spatial fit 34 centroid is now closest to src. 46
[Fri Mar  9 19:37:12 2012] Source 38 is offset by 3.968299 and 8.849080 pixels which is larger than
2 X fitted extent = 1.061186 x 1.061186, not incorporating fit results
[Fri Mar  9 19:37:12 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:37:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:37:12 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:37:12 2012] Source does appear to be extended
[Fri Mar  9 19:37:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 01:49:33 2012] XMMSAS src. selection expression = ellipse(32703.328000, 31039.956000, 1194.786034, 1194.786034, 0.000000, X, Y)
[Sat Mar 10 01:49:33 2012] Writing source region out to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src38_src.reg
[Sat Mar 10 01:49:33 2012] Extracting stamp from image fullrun_mos2_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (308, 289) - (445, 426)
[Sat Mar 10 01:49:33 2012] XMMSAS bgd. selection expression = annulus(32703.328000, 31039.956000, 1991.310057, 3982.620115, X, Y) && !ellipse(31305.782000, 28550.750400, 663.843219, 295.593609, 220.030000, X, Y) && !ellipse(32387.708000, 28225.753600, 1631.096047, 1631.096047, 0.000000, X, Y) && !ellipse(30020.049200, 28783.597000, 474.757614, 474.757614, 0.000000, X, Y) && !ellipse(28219.939100, 30019.749400, 1334.256038, 1334.256038, 0.000000, X, Y) && !ellipse(29016.968660, 29482.069400, 469.277614, 469.277614, 0.000000, X, Y) && !ellipse(28757.675200, 31486.370600, 625.639218, 625.639218, 0.000000, X, Y) && !ellipse(31633.444214, 29462.973694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31612.780000, 28532.678000, 1476.552042, 1476.552042, 0.000000, X, Y) && !ellipse(31965.762000, 28859.010000, 1503.784043, 1503.784043, 0.000000, X, Y) && !ellipse(33584.654400, 30911.262400, 783.717623, 783.717623, 0.000000, X, Y) && !ellipse(30202.019000, 32237.012000, 954.504027, 954.504027, 0.000000, X, Y) && !ellipse(29215.717200, 31226.644000, 1407.624041, 1407.624041, 0.000000, X, Y) && !ellipse(30856.876000, 28285.924000, 1991.520057, 1991.520057, 0.000000, X, Y) && !ellipse(29240.458000, 33263.002000, 1544.656044, 1544.656044, 0.000000, X, Y)
[Sat Mar 10 01:49:33 2012] Writing fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src38.gif
[Sat Mar 10 02:25:23 2012] Mean detx,y = (-5491.21, 3542.14) 
[Sat Mar 10 02:25:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 02:25:59 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 02:25:59 2012] Setting source spectrum file to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat Mar 10 02:25:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sat Mar 10 04:28:43 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:43 2012] Error reading totcts from fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat Mar 10 04:28:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:46 2012] Using photon index=1.80, rate=0.00847, arf fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src38.arf
[Sat Mar 10 04:28:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:46 2012] Updating source flux to 1.1e-13
[Sat Mar 10 04:33:33 2012] Flag b found in src. 38 procflags, skipping spectral fitting
[Sat Mar 10 04:33:33 2012] Flag c found in src. 38 procflags, skipping spectral fitting