[Thu Mar  8 00:56:14 2012] Detection parameters:
  Position = (299.7, 385.7) = 18 4 5.93 -21 33 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.9 +/- 11.3
  Background counts = 30.2
  Rate = 0.002 +/- 0.0005

[Thu Mar  8 00:56:15 2012] Off-axis axis estimate = 6.33'
[Thu Mar  8 16:24:25 2012] Using EEF radius (= 9.59 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 16:24:25 2012] Initial guess for spatial extent in simple fitting = 9.59"
[Thu Mar  8 16:24:25 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.854
[Thu Mar  8 16:24:25 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 9.59"
[Thu Mar  8 19:52:26 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src58.ximg exists
[Thu Mar  8 19:52:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src58.csv
[Thu Mar  8 19:52:26 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src58_1.ximg exists
[Thu Mar  8 19:52:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src58.csv
[Thu Mar  8 19:52:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:52:27 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Thu Mar  8 19:52:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src58.csv
[Thu Mar  8 19:52:27 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Thu Mar  8 19:52:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src58.csv
[Thu Mar  8 19:52:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:53:39 2012] Warning, spatial fit 58 centroid is now closest to src. 26
[Thu Mar  8 19:53:39 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:39 2012] Assessing source extent using major
[Thu Mar  8 19:53:39 2012] Source does appear to be extended
[Thu Mar  8 19:53:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 13:52:02 2012] Using EEF radius (= 9.59 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 13:52:02 2012] Initial guess for spatial extent in simple fitting = 9.59"
[Fri Mar  9 13:52:02 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.854
[Fri Mar  9 13:52:02 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 9.59"
[Fri Mar  9 19:35:51 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src56.ximg exists
[Fri Mar  9 19:35:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src56.csv
[Fri Mar  9 19:35:51 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src56_1.ximg exists
[Fri Mar  9 19:35:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src56.csv
[Fri Mar  9 19:35:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:35:53 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Fri Mar  9 19:35:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src56.csv
[Fri Mar  9 19:35:53 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Fri Mar  9 19:35:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src56.csv
[Fri Mar  9 19:35:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:37:12 2012] Warning, spatial fit 56 centroid is now closest to src. 26
[Fri Mar  9 19:37:12 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:37:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:37:12 2012] Assessing source extent using major
[Fri Mar  9 19:37:12 2012] Source does appear to be extended
[Fri Mar  9 19:37:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 01:49:34 2012] XMMSAS src. selection expression = ellipse(26023.417755, 33509.195862, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 10 01:49:34 2012] Writing source region out to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src29_src.reg
[Sat Mar 10 01:49:34 2012] Extracting stamp from image fullrun_mos2_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (262, 348) - (337, 423)
[Sat Mar 10 01:49:34 2012] XMMSAS bgd. selection expression = annulus(26023.417755, 33509.195862, 1087.500000, 2175.000000, X, Y) && !ellipse(28219.939100, 30019.749400, 1334.256038, 1334.256038, 0.000000, X, Y) && !ellipse(25155.890000, 31713.212000, 572.368816, 572.368816, 0.000000, X, Y) && !ellipse(25951.920200, 31298.116000, 1404.448040, 1404.448040, 0.000000, X, Y) && !ellipse(23253.404000, 36277.184400, 1479.872043, 1479.872043, 0.000000, X, Y) && !ellipse(28757.675200, 31486.370600, 625.639218, 625.639218, 0.000000, X, Y) && !ellipse(22994.594000, 35068.548000, 1694.120049, 1694.120049, 0.000000, X, Y) && !ellipse(27008.409729, 34419.326630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29215.717200, 31226.644000, 1407.624041, 1407.624041, 0.000000, X, Y) && !ellipse(26044.727020, 31688.910431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29240.458000, 33263.002000, 1544.656044, 1544.656044, 0.000000, X, Y) && !ellipse(21442.200000, 38555.182000, 3488.864100, 3488.864100, 0.000000, X, Y)
[Sat Mar 10 01:49:34 2012] Writing fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src29.gif
[Sat Mar 10 02:32:57 2012] Mean detx,y = (1221.50, 5918.51) 
[Sat Mar 10 02:32:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 02:33:15 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 02:33:15 2012] Setting source spectrum file to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Mar 10 02:33:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Mar 10 04:14:47 2012] Not generating rmf since there are only 40 counts
[Sat Mar 10 04:14:47 2012] rmf not generated due to insufficient counts
[Sat Mar 10 04:28:44 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:44 2012] Error reading totcts from fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Mar 10 04:28:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:47 2012] Using photon index=1.80, rate=0.00178, arf fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src29.arf
[Sat Mar 10 04:28:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:47 2012] Updating source flux to 2.7e-14
[Sat Mar 10 04:33:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting