[Thu Mar  8 00:56:14 2012] Detection parameters:
  Position = (267.8, 409.0) = 18 4 15.87 -21 31 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.7 +/- 11.3
  Background counts = 29.9
  Rate = 0.002 +/- 0.0006

[Thu Mar  8 00:56:15 2012] Off-axis axis estimate = 8.32'
[Thu Mar  8 16:24:25 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 16:24:25 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Thu Mar  8 16:24:25 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.045
[Thu Mar  8 16:24:25 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 10.59"
[Thu Mar  8 19:52:25 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src46.ximg exists
[Thu Mar  8 19:52:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src46.csv
[Thu Mar  8 19:52:25 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src46_1.ximg exists
[Thu Mar  8 19:52:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src46.csv
[Thu Mar  8 19:52:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:52:27 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Thu Mar  8 19:52:27 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Thu Mar  8 19:52:27 2012] Fit fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Thu Mar  8 19:53:39 2012] Spatial fit model total counts = 468.135000, observed total counts = 463.000000
[Thu Mar  8 19:53:39 2012] Offset between fit and detection position for source 24 = 6.129718 pixels
[Thu Mar  8 19:53:39 2012] 477.101000 total counts/ 205.567000 bgd. counts: snr = 18.938585
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 6.129718 pixels
  Position = (264.9, 403.6) = 18 4 16.79 -21 31 54.0
  Extent = 21.2 (21.1-42.4)", rotation angle = 0
  Source counts = 271.5 +/- 21.8
  Background counts = 205.6
  Rate = 0.008 +/- 0.0007
[Thu Mar  8 19:53:39 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:39 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 19:53:39 2012] Source does appear to be extended
[Thu Mar  8 19:53:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 13:52:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar  9 13:52:02 2012] Initial guess for spatial extent in simple fitting = 21.18"
[Fri Mar  9 13:52:02 2012] source mask rpix=4.9, npix_max = 115, mask sum = 94, frac = 0.815
[Fri Mar  9 13:52:02 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 21.18"
[Fri Mar  9 19:35:50 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src45.ximg exists
[Fri Mar  9 19:35:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src45.csv
[Fri Mar  9 19:35:50 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src45_1.ximg exists
[Fri Mar  9 19:35:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src45.csv
[Fri Mar  9 19:35:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:35:53 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Fri Mar  9 19:35:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src45.csv
[Fri Mar  9 19:35:53 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Fri Mar  9 19:35:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src45.csv
[Fri Mar  9 19:35:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:37:12 2012] Source 24 is offset by -4.373172 and -8.649517 pixels which is larger than
2 X fitted extent = 3.583692 x 9.196322, not incorporating fit results
[Fri Mar  9 19:37:12 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:37:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:37:12 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:37:12 2012] Source does appear to be extended
[Fri Mar  9 19:37:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:37:12 2012] Source is confused with source 23
[Sat Mar 10 01:49:33 2012] XMMSAS src. selection expression = ellipse(22994.594000, 35068.548000, 1270.590037, 1270.590037, 0.000000, X, Y)
[Sat Mar 10 01:49:33 2012] Writing source region out to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src24_src.reg
[Sat Mar 10 01:49:33 2012] Extracting stamp from image fullrun_mos2_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (192, 331) - (338, 477)
[Sat Mar 10 01:49:33 2012] XMMSAS bgd. selection expression = annulus(22994.594000, 35068.548000, 2117.650061, 4235.300122, X, Y) && !ellipse(22558.070862, 33677.219391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17370.011460, 39866.499380, 2271.720065, 283.964808, 238.618000, X, Y) && !ellipse(18064.570000, 38763.384000, 2062.232059, 2062.232059, 0.000000, X, Y) && !ellipse(23172.301460, 33232.387400, 531.824015, 531.824015, 0.000000, X, Y) && !ellipse(17486.386000, 39764.324000, 2911.480084, 2911.480084, 0.000000, X, Y) && !ellipse(19571.322000, 36903.294000, 3034.560087, 3034.560087, 0.000000, X, Y) && !ellipse(18908.145800, 37632.424000, 3761.392108, 470.174414, 52.395300, X, Y) && !ellipse(20040.166000, 36190.568000, 793.383223, 793.383223, 0.000000, X, Y) && !ellipse(28219.939100, 30019.749400, 1334.256038, 1334.256038, 0.000000, X, Y) && !ellipse(25155.890000, 31713.212000, 572.368816, 572.368816, 0.000000, X, Y) && !ellipse(24345.891400, 36901.572600, 747.300022, 222.032006, 33.666000, X, Y) && !ellipse(25951.920200, 31298.116000, 1404.448040, 1404.448040, 0.000000, X, Y) && !ellipse(23253.404000, 36277.184400, 1479.872043, 1479.872043, 0.000000, X, Y) && !ellipse(20500.257217, 35711.510803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27008.409729, 34419.326630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26023.417755, 33509.195862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20646.970000, 39574.376000, 1965.376057, 1965.376057, 0.000000, X, Y) && !ellipse(26044.727020, 31688.910431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21442.200000, 38555.182000, 3488.864100, 3488.864100, 0.000000, X, Y)
[Sat Mar 10 01:49:33 2012] Writing fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src24.gif
[Sat Mar 10 02:28:59 2012] Mean detx,y = (4213.85, 7479.29) 
[Sat Mar 10 02:29:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 02:29:34 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 02:29:34 2012] Setting source spectrum file to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Mar 10 02:29:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sat Mar 10 04:28:44 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:44 2012] Error reading totcts from fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Mar 10 04:28:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:47 2012] Using photon index=1.80, rate=0.00848, arf fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src24.arf
[Sat Mar 10 04:28:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:47 2012] Updating source flux to 1.4e-13
[Sat Mar 10 04:33:33 2012] Flag b found in src. 24 procflags, skipping spectral fitting
[Sat Mar 10 04:33:33 2012] Flag c found in src. 24 procflags, skipping spectral fitting