[Thu Mar  8 00:56:14 2012] Detection parameters:
  Position = (244.2, 450.6) = 18 4 23.22 -21 28 29.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.6 +/- 12.3
  Background counts = 34.4
  Rate = 0.002 +/- 0.0004

[Thu Mar  8 00:56:15 2012] Off-axis axis estimate = 11.71'
[Thu Mar  8 16:24:25 2012] Using EEF radius (= 12.28 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 16:24:25 2012] Initial guess for spatial extent in simple fitting = 12.28"
[Thu Mar  8 16:24:25 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.109
[Thu Mar  8 16:24:25 2012] Giving source the simple spatial ID 60 for pass 0, mean size = 12.28"
[Thu Mar  8 19:52:26 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src60.ximg exists
[Thu Mar  8 19:52:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src60.csv
[Thu Mar  8 19:52:26 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src60_1.ximg exists
[Thu Mar  8 19:52:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src60.csv
[Thu Mar  8 19:52:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:52:27 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Thu Mar  8 19:52:27 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Thu Mar  8 19:52:27 2012] Fit fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src60 appears to have run properly
[Thu Mar  8 19:53:39 2012] Spatial fit model total counts = 565.725000, observed total counts = 566.000000
[Thu Mar  8 19:53:39 2012] Offset between fit and detection position for source 19 = 7.968367 pixels
[Thu Mar  8 19:53:39 2012] 552.836000 total counts/ 325.819000 bgd. counts: snr = 12.576801
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 7.968367 pixels
  Position = (237.9, 455.4) = 18 4 25.19 -21 28 8.7
  Extent = 24.6 (7.5-49.1)", rotation angle = 0
  Source counts = 227.0 +/- 23.5
  Background counts = 325.8
  Rate = 0.007 +/- 0.0007
[Thu Mar  8 19:53:39 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:39 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 19:53:39 2012] Source does appear to be extended
[Thu Mar  8 19:53:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 13:52:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar  9 13:52:02 2012] Initial guess for spatial extent in simple fitting = 24.57"
[Fri Mar  9 13:52:02 2012] source mask rpix=5.6, npix_max = 151, mask sum = 144, frac = 0.953
[Fri Mar  9 13:52:02 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 24.57"
[Fri Mar  9 19:35:51 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src58.ximg exists
[Fri Mar  9 19:35:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src58.csv
[Fri Mar  9 19:35:51 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src58_1.ximg exists
[Fri Mar  9 19:35:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src58.csv
[Fri Mar  9 19:35:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:35:53 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Fri Mar  9 19:35:53 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Fri Mar  9 19:35:53 2012] Fit fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Fri Mar  9 19:37:12 2012] Warning, spatial fit 58 centroid is now closest to src. 20
[Fri Mar  9 19:37:12 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:37:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:37:12 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:37:12 2012] Source does appear to be extended
[Fri Mar  9 19:37:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:37:12 2012] Source is confused with source 5
[Fri Mar  9 19:37:12 2012] Source is confused with source 20
[Sat Mar 10 01:49:34 2012] XMMSAS src. selection expression = ellipse(20646.970000, 39574.376000, 1474.032042, 1474.032042, 0.000000, X, Y)
[Sat Mar 10 01:49:34 2012] Writing source region out to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src19_src.reg
[Sat Mar 10 01:49:34 2012] Extracting stamp from image fullrun_mos2_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (153, 371) - (323, 540)
[Sat Mar 10 01:49:34 2012] XMMSAS bgd. selection expression = annulus(20646.970000, 39574.376000, 2456.720071, 4913.440141, X, Y) && !ellipse(16909.460190, 40489.400635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17370.011460, 39866.499380, 2271.720065, 283.964808, 238.618000, X, Y) && !ellipse(18064.570000, 38763.384000, 2062.232059, 2062.232059, 0.000000, X, Y) && !ellipse(17486.386000, 39764.324000, 2911.480084, 2911.480084, 0.000000, X, Y) && !ellipse(19571.322000, 36903.294000, 3034.560087, 3034.560087, 0.000000, X, Y) && !ellipse(18908.145800, 37632.424000, 3761.392108, 470.174414, 52.395300, X, Y) && !ellipse(20040.166000, 36190.568000, 793.383223, 793.383223, 0.000000, X, Y) && !ellipse(24345.891400, 36901.572600, 747.300022, 222.032006, 33.666000, X, Y) && !ellipse(23253.404000, 36277.184400, 1479.872043, 1479.872043, 0.000000, X, Y) && !ellipse(20500.257217, 35711.510803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19156.702209, 41965.766846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22994.594000, 35068.548000, 1694.120049, 1694.120049, 0.000000, X, Y) && !ellipse(21442.200000, 38555.182000, 3488.864100, 3488.864100, 0.000000, X, Y)
[Sat Mar 10 01:49:34 2012] Writing fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src19.gif
[Sat Mar 10 02:33:45 2012] Mean detx,y = (6819.72, 11809.65) 
[Sat Mar 10 02:33:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 02:34:08 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 02:34:09 2012] Setting source spectrum file to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Mar 10 02:34:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat Mar 10 04:28:44 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:44 2012] Error reading totcts from fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Mar 10 04:28:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:47 2012] Using photon index=1.80, rate=0.00709, arf fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src19.arf
[Sat Mar 10 04:28:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:47 2012] Updating source flux to 1.7e-13
[Sat Mar 10 04:33:33 2012] Flag c found in src. 19 procflags, skipping spectral fitting